« previous next »
Pages: [1]   Go Down

Author Topic: .562 smooth bore  (Read 1519 times)

Offline kudu

  • Full Member
  • ***
  • Posts: 218
.562 smooth bore
« on: February 05, 2019, 10:25:08 PM »
I building a smooth bore with a .562 barrel I.D what gage is this ?

 and where am I going to get a ball mould around (.550 I would guess?)
Logged

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3004
Re: .562 smooth bore
« Reply #1 on: February 05, 2019, 10:31:22 PM »
Not sure of the gauge, probably 26 or 28. Molds would be from Tanner in England.
Mark
Logged
Mark

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: .562 smooth bore
« Reply #2 on: February 05, 2019, 11:38:08 PM »
Larry Callahan will make so called “bag molds” in most any caliber, I believe. Mine work fine. They get hot in a hurry.
Logged
Andover, Vermont

Joe S

  • Guest
Re: .562 smooth bore
« Reply #3 on: February 06, 2019, 01:48:20 AM »
It's 26 gauge.
Logged

Offline Standing Bear

  • Hero Member
  • *****
  • Posts: 667
Re: .562 smooth bore
« Reply #4 on: February 06, 2019, 02:59:03 AM »
with no grooves a bore size ball and patch combo should work.

Easy enough to try a .535 ball and .015” patch   Adjust ball to .530 or patch as needed.  I use a .600 and .010 in my 20 ga.

.535 + .015 + .015 = .565
Logged
Nothing is hard if you have the right equipment and know how to use it.  OR have friends who have both.

http://texasyouthhunting.com/

Offline RichG

  • Sr. Member
  • ****
  • Posts: 455
Re: .562 smooth bore
« Reply #5 on: February 06, 2019, 04:39:14 PM »
t/C had a mold for their 56 smooth bore witch I believe was .550. Also seen Lyman molds in .550. Try E Bay.
Logged

Offline Flint62Smoothie

  • Sr. Member
  • ****
  • Posts: 482
Re: .562 smooth bore
« Reply #6 on: February 06, 2019, 05:26:55 PM »
Quote from: RichG on February 06, 2019, 04:39:14 PM
t/C had a mold for their 56 smooth bore witch I believe was .550. Also seen Lyman molds in .550. Try E Bay.
Exactly, I see those 550 molds around here quite a bit, as that was one of the only BP arms that could be used here in Mass (prior MZL season was smoothbores only).
Logged
All of my muzzleloaders will shoot into one ragged hole ALL DAY LONG ... it's just the 2nd or 3rd & other shots that tend to open up my groups ... !

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15825
Re: .562 smooth bore
« Reply #7 on: February 06, 2019, 10:47:16 PM »
26bore is .564" = 269.2gr.
27bore is .577" = 259.3gr.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V
Pages: [1]   Go Up
« previous next »