Author Topic: Building a Flint Lock pocket pistol (Read 13998 times)

runastav · « **Reply #50 on:** April 11, 2019, 11:49:45 AM »

Hi all, and thank you guys! Ramrod pipe made
Runar

car insurance and moving to another state

Lzymtlsmth · « **Reply #51 on:** April 13, 2019, 07:26:40 PM »

Quote from: runastav on March 26, 2019, 12:20:57 PM

Hi Guys! And thank you, hen thats no problem
Made the mainspring runner blade from a old kicksled-https://en.wikipedia.org/wiki/Kicksled work Perfect! Does it spark? $#*! yes!
Runar

share image

single dice

Runar,
I have a lock with a broken mainspring, I’ve made small springs with success. You make it look easy , think I’m gonna try it.
Kent

Marcruger · « **Reply #52 on:** April 13, 2019, 07:36:45 PM »

Nice pipe work! Very artistic.

runastav · « **Reply #53 on:** April 13, 2019, 08:26:25 PM »

Hi all, and thank you kent and Marcruger! Horn nose cap made
Runar

Daryl · « **Reply #54 on:** April 13, 2019, 08:29:21 PM »

Runar- was this common, a horn nose-cap being just a shell?
Well done, btw.

Justin Urbantas · « **Reply #55 on:** April 14, 2019, 05:35:50 AM »

What did you use to attach the horn nose cap?

Pukka Bundook · « **Reply #56 on:** April 14, 2019, 05:43:25 AM »

Can't speak for Runar, but most were glued in place, Justin.

Runar,
That ramrod pipe is as cute as a button!

Lovely work.

runastav · « **Reply #57 on:** April 15, 2019, 10:13:04 AM »

Hi guys! And thank you! Daryl, yes -Justin Urbantas , epoxy the old folks use animal glue(Horn glue) So the litle ramrod horn tip epoxy in Place and sideplate made.
Runar

heads or tails flipper

upload image host

Bob Roller · « **Reply #58 on:** April 15, 2019, 05:46:50 PM »

I THINK I have made 4 pistols in my career and I think,as do others that
even full size target pistols are a lot harder than rifles.This little gun of yours
shows a lot of skill and dedication,especially that lock which I KNOW was NOT
easy to make.
Thanks for the tutorial and pictures of a job well done.

Bob Roller

Bob Roller

runastav · « **Reply #59 on:** April 17, 2019, 12:47:08 PM »

Hi all, and thank you Bob! Sights made an soft soldered, so its the finish of Wood and metal and checkering the stock

Runar

ammonium alum formula

Daryl · « **Reply #60 on:** April 17, 2019, 08:10:07 PM »

Amazing Runar - you are a gun BUILDER.
Such talent.

smylee grouch · « **Reply #61 on:** April 17, 2019, 09:18:31 PM »

Runar, you are a fabricator extraordin'air. Always enjoy your builds.

Angus · « **Reply #62 on:** April 18, 2019, 03:47:31 AM »

Runar,
Very Nice and fun to follow along.
Du har definitivt alles oppmerksomhet under bygge. Så nær finish. De beste ønsker til deg og alle dine norske venner.

runastav · « **Reply #63 on:** April 20, 2019, 04:34:58 PM »

Hi all! And thank you guys! So the checkering(Said before my neck hate it!) The finish checkering comparing With a blown up photo of the original.
Runar

msellers · « **Reply #64 on:** April 20, 2019, 06:28:42 PM »

Runar,

As always exquisite craftsmanship. That checkering makes my head hurt just trying to make all the complex curves line up and look proper.

Thanks for sharing,
Mike

Justin Urbantas · « **Reply #65 on:** April 20, 2019, 06:51:27 PM »

Very nice. What checkering tool did you use?

D. Taylor Sapergia · « **Reply #66 on:** April 20, 2019, 06:56:40 PM »

Runar: you have to be very pleased with how this little pistol has turned out. What will seal the deal is adding the engraving that is on the original.

runastav · « **Reply #67 on:** April 21, 2019, 11:48:45 AM »

Hi Guys and thank you! Justin Urbantas, its American made and 18 LPI have it for years dont now brand!
I am Lucky and humble, Taylor will engrave the Pocket pistol for me like he did the Hawken pistol!! So the part will be sendt to him and if the customs agency in Canada and Norway dont go bananas there will be lots of photos here of the result!
Runar

upload pic

HelmutKutz · « **Reply #68 on:** April 21, 2019, 03:55:24 PM »

Is beautiful work Runar!
HK

Marcruger · « **Reply #69 on:** April 22, 2019, 12:24:10 AM »

Wonderful Runar. You are always amazing. Very neat little pistol. God Bless, Marc

Mick C · « **Reply #70 on:** May 01, 2019, 12:14:51 AM »

WOW! Amazing. Have loved following your progress.

Tim Crosby · « **Reply #71 on:** May 01, 2019, 01:33:16 AM »

Absolutely Amazing Work!

Tim C.

runastav · « **Reply #72 on:** May 01, 2019, 11:12:26 PM »

Hi guys! and thank you very much! the parts is now ready for packaged and will send to Taylor in Canada, viking ship take to long time so I use fly shipping

Runar

runastav · « **Reply #73 on:** October 31, 2019, 07:40:53 PM »

Hi all! Its back from Taylor, he is a artist and do beautiful job thank you Taylor!
Runar

msellers · « **Reply #74 on:** October 31, 2019, 08:17:16 PM »

You two do some amazing work. It looks great, and the engraving is a fine finishing touch to make it look even better.
Mike

News:

Author Topic: Building a Flint Lock pocket pistol (Read 13998 times)

Lzymtlsmth