Any info on older Ardesa .58 cal percussion?

[gtwusmc]

Hello, I would first like to preface this post by stating, I realize this is by noooo means a fancy rifle. I am just curious about anything I can find out about it. ( I also posted a cpl days ago in the "Black Powder Shooting" forum, with no success...)
  But last summer I purchased a .58 cal Ardesa stamped rifle for about $180 from an online auction. Cosmetically it is in pretty darn good shape for a "cheaper" production rifle. I shot it just a handful of times, just enough for getting comfortable with it. Used it for deer hunting in Ohio this past fall, didn't see a deer to shoot, but it went "BANG" after being loaded and carried in the snowy woods all week and hit about 2" high at 50 yds (Using a .562 ball and 80 gr FF Goex is I recall correctly .)
  My question (s) are any info from the more informed on this particular rifle. I really cant find anything on the internet on it. I am curious about years of production, barrel rate of twist, any pros' and con's of it?
  I am currently on the road or I would post pics of it, but it has a crecent moon inlay on the cheek rest, and is a double wedge fore end , I have seen a few similar rifles by Ardesa, but usually .50 or even .45 cal. ( Pics I am posting below are from an online auction of an almost identical Ardesa rifle in looks and condition, but the rifle pictured is a .45, while mine is .58)
  Any info would be greatly appreciated!

[Bob Roller]

About 10 years ago I helped a shooter on the 500 yard range at Friendship with
an Ardesa.451.It was new and unfired and was not bad looking.Once we got a load
working it shot well at the 500 yard target.I also recall remaking a lock for one for
an American International competitor that was going to Europe or wherever to shoot.
I have redone two of these locks and the tumblers were very soft.One lasted for 5
shots from new and it came in from Hawaii as I recall.They may no be making these
guns any more but other than the low quality locks,they were not bad.

Bob Roller

[gtwusmc]

  Thank you sir, I appreciate any info I can gather.
   Once again, I know this isn't a real fancy or true to historical form rifle, but just want to enjoy it as an occasional range and beat up in the brush rifle.

[Seth Isaacson]

I believe the current "Traditions" guns in the U.S. are still manufactured by Ardesa if I am recalling correctly. An L&R replacement lock for Traditions current guns may fit if yours fails after getting some use.

[gtwusmc]

  Thank you as well!

[bones92]

These were made in Spain, and Ardesa continues to be a supplier for Traditions (and maybe others).  https://ammoterra.com/company/ardesa-s-a

As stated before, the barrels are actually quite decent.  You may be able to swap out an L&R lock which would probably make for a much more enjoyable experience (and it will last a lot longer)... L&R does make some replacement locks that are nearly drop-in ready... but you'd have to compare your particular lock.  (I would call L&R and inquire).

[gtwusmc]

 This is all great info, I truly appreciate the input.