« previous next »
Pages: [1]   Go Down

Author Topic: Barrel profile  (Read 1493 times)

Offline porchdog48

  • Full Member
  • ***
  • Posts: 120
Barrel profile
« on: October 31, 2019, 12:29:02 AM »
    I recently pick up a Getz barrel with the following profile measurements:
    Length 38 inches
    Breech .880 inches across flats tapering to .627 inches 11 inches from muzzle, and back up to .765 at the muzzle. I cannot find any information on this profile, but do not believe it is an A profile. I was wondering if this a special profile, and what school rifle would be appropriate for this barrel. Any information would be appreciated.
   
       Dave





   







Logged

Offline Fyrstyk

  • Full Member
  • ***
  • Posts: 235
  • "All I ask of living is to have no chains on me."
Re: Barrel profile
« Reply #1 on: October 31, 2019, 01:14:07 AM »
Sounds like a swamped barrel to me.
Logged

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13269
    • Mike Brooks Gunmaker
Re: Barrel profile
« Reply #2 on: October 31, 2019, 02:01:28 AM »
Getz made many one off barrels that don't correspond to any standard profiles. What ever you make should be late as it is a very small barrel.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline porchdog48

  • Full Member
  • ***
  • Posts: 120
Re: Barrel profile
« Reply #3 on: October 31, 2019, 01:57:45 PM »
     
      Mike,
           I thought this might be the case since it was such a small barrel , but lack of knowledge on my part prompted the question to confirm. I appreciate you giving me some direction on the build.

           Best regards,
            Dave.
Logged

Offline Gordy

  • Jr. Member
  • **
  • Posts: 70
Re: Barrel profile
« Reply #4 on: October 31, 2019, 03:56:05 PM »
PD,
 I had a barrel with the same demensions I believe. Thinking that Getz barrel was from the 80's era. Just my 2 cents worth.
Have a great day, Gordy
Logged

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13269
    • Mike Brooks Gunmaker
Re: Barrel profile
« Reply #5 on: October 31, 2019, 04:37:22 PM »
Quote from: Gordy on October 31, 2019, 03:56:05 PM
PD,
 I had a barrel with the same demensions I believe. Thinking that Getz barrel was from the 80's era. Just my 2 cents worth.
Have a great day, Gordy
You can get a fair idea of the age of the barrel by the serial #.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline porchdog48

  • Full Member
  • ***
  • Posts: 120
Re: Barrel profile
« Reply #6 on: October 31, 2019, 08:56:45 PM »
 Serial # 4388
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18939
Re: Barrel profile
« Reply #7 on: October 31, 2019, 09:25:48 PM »
Very early. Don likely made it though that makes no difference except nostalgia.
Logged
Andover, Vermont

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13269
    • Mike Brooks Gunmaker
Re: Barrel profile
« Reply #8 on: October 31, 2019, 09:30:17 PM »
Quote from: porchdog48 on October 31, 2019, 08:56:45 PM
Serial # 4388
I'd say  very early 80's. Don used to produce ALOT of barrels back in those days.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?
Pages: [1]   Go Up
« previous next »