Author Topic: Axis Deer Antler  (Read 1901 times)

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Axis Deer Antler
« on: September 03, 2019, 10:44:46 PM »
Some of you may know that I had been looking for good deer antler for powder horn tips.    I ordered some grade A Axis deer antler sheds off of ebay.   I had previously cut up and drilled the antler and was very optimistic about it, but I just got around to turning it.   I wanted to report that I couldn't be more pleased.   The antler was dense, and even, and white all the way through.   It turned relatively easily for bone using cryogentically hardened HSS.   I finished it with just with a skew chisel and scrapers at about 1000 RPM and it looks like polished ivory.  I have attached a photo of an antler blank and the finished product.




Offline FDR

  • Sr. Member
  • ****
  • Posts: 329
Re: Axis Deer Antler
« Reply #1 on: September 03, 2019, 10:51:20 PM »
That turned out real nice!  Thanks for sharing.

Fred

Offline Jim Spray

  • Full Member
  • ***
  • Posts: 226
Re: Axis Deer Antler
« Reply #2 on: September 03, 2019, 11:55:08 PM »
Axis antler is great to work with! Nice job on the tip.

Offline Bob McBride

  • Hero Member
  • *****
  • Posts: 2828
  • TENNESSEE
    • Black Powder TV
Re: Axis Deer Antler
« Reply #3 on: September 04, 2019, 03:35:32 PM »
Wow Mark! Super stuff!

Offline J Henry

  • Hero Member
  • *****
  • Posts: 685
Re: Axis Deer Antler
« Reply #4 on: September 04, 2019, 03:40:06 PM »
  Does it take a stain.?

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Axis Deer Antler
« Reply #5 on: September 04, 2019, 05:30:45 PM »
  Does it take a stain.?

I haven't tried yet.  I will let you know when I do.

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5310
  • My passion is longrifles!
    • martialartsusa.com
Re: Axis Deer Antler
« Reply #6 on: September 04, 2019, 10:32:17 PM »
It definitely looks quite nice, better than whitetail, IMHO.
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline aaronc

  • Hero Member
  • *****
  • Posts: 747
Re: Axis Deer Antler
« Reply #7 on: September 04, 2019, 11:40:13 PM »
That's awesome Mark,...thanks for the follow up.
- Aaron C
At the work bench.

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1324
Re: Axis Deer Antler
« Reply #8 on: September 08, 2019, 07:44:30 PM »
Yep that axis antler is good stuff. I've found that moose antler can be really good also but you need to be able to pick your own.

Offline Chris in Washington

  • Jr. Member
  • **
  • Posts: 87
Re: Axis Deer Antler
« Reply #9 on: September 10, 2019, 05:55:28 AM »
I'll have to look into getting some of the axis antler.  Like Mr Barker stated moose antler turns really nice too.   This tip is from some moose antler I had.   

Chris Statz

Offline Einsiedler

  • Jr. Member
  • **
  • Posts: 56
Re: Axis Deer Antler
« Reply #10 on: September 10, 2019, 03:54:00 PM »
A small priming horn I fabricated from an axis shed I picked up in South Texas. Nothing fancy. But good antler to work with for sure!