Author Topic: Pour spout lids for Swiss powder containers (plastic)?  (Read 3636 times)

Offline Justin

  • Full Member
  • ***
  • Posts: 182
Pour spout lids for Swiss powder containers (plastic)?
« on: August 26, 2019, 05:49:29 AM »
Does anyone know where to find pour spout lids for plastic Swiss powder containers?

I have some plastic lids that fit Goex but the mouth on the Swiss containers is smaller.

Offline recurve

  • Hero Member
  • *****
  • Posts: 564
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #1 on: August 26, 2019, 07:06:11 AM »
Find the old tin pour lids from goex  they fit

Offline OldMtnMan

  • Hero Member
  • *****
  • Posts: 2648
  • Colorado
    • Verified Ladies  Prime Сasual Dating
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #2 on: August 26, 2019, 03:20:52 PM »

Offline Standing Bear

  • Hero Member
  • *****
  • Posts: 667
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #3 on: August 26, 2019, 03:58:36 PM »
Over 30 years ago, I cut the head off a .30-30 hull, drilled a hole in a Goex lid and used JB weld to hold it in place.  A .41 mag case fits nicely with just a little friction.
Nothing is hard if you have the right equipment and know how to use it.  OR have friends who have both.

http://texasyouthhunting.com/

Offline OldMtnMan

  • Hero Member
  • *****
  • Posts: 2648
  • Colorado
    • Verified Ladies  Prime Сasual Dating
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #4 on: August 26, 2019, 05:50:13 PM »
Spout is only $5.00.  :)

Offline Frank

  • Hero Member
  • *****
  • Posts: 966
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #5 on: August 26, 2019, 06:31:45 PM »
Spout is only $5.00.  :)

Plus ten dollars shipping.

Offline Justin

  • Full Member
  • ***
  • Posts: 182
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #6 on: August 26, 2019, 10:31:48 PM »
I use this one. Original Goex spout.

http://www.octobercountry.com/rmc-powder-can-lids-with-spout/

Thanks! I just ordered a couple along with some other stuff. I'm sure someone has done research that says if you make your shipping cost high, people buy more at one time to make the shipping cost less of the total... lol

Offline Michigan Flinter

  • Hero Member
  • *****
  • Posts: 625
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #7 on: August 26, 2019, 10:40:41 PM »
   I BOUGHT SOME 90 WEIGHT LUBE AND THE SPOUT ON THE CONTAINER FITS THE SWISS CONTAINER .

Offline OldMtnMan

  • Hero Member
  • *****
  • Posts: 2648
  • Colorado
    • Verified Ladies  Prime Сasual Dating
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #8 on: August 27, 2019, 02:11:30 AM »
I use this one. Original Goex spout.

http://www.octobercountry.com/rmc-powder-can-lids-with-spout/

Thanks! I just ordered a couple along with some other stuff. I'm sure someone has done research that says if you make your shipping cost high, people buy more at one time to make the shipping cost less of the total... lol

Yeah, I always bought them when I had a big order. I never noticed the shipping charge. It didn't seem like much.

Offline Semisane

  • Jr. Member
  • **
  • Posts: 90
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #9 on: August 27, 2019, 03:39:39 AM »
My solution below.









My wife says I'm totally nuts, but I think I'm Semisane.

Offline OldMtnMan

  • Hero Member
  • *****
  • Posts: 2648
  • Colorado
    • Verified Ladies  Prime Сasual Dating
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #10 on: August 27, 2019, 04:13:55 PM »
Good idea Semi but now, where do you put your toothpaste?

Offline Justin

  • Full Member
  • ***
  • Posts: 182
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #11 on: August 27, 2019, 06:36:15 PM »
Now that's some ingenuity right there!

Offline longcruise

  • Hero Member
  • *****
  • Posts: 1819
  • Arvada, Colorado
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #12 on: August 27, 2019, 09:23:54 PM »
Thought it was going to be a tutorial on toothpaste as a lube. :)
Mike Lee

Anonymous

  • Guest
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #13 on: August 27, 2019, 10:22:09 PM »
Good idea Semi but now, where do you put your toothpaste?
In an empty powder container.

Offline OldMtnMan

  • Hero Member
  • *****
  • Posts: 2648
  • Colorado
    • Verified Ladies  Prime Сasual Dating
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #14 on: August 28, 2019, 02:26:34 AM »
Good idea Semi but now, where do you put your toothpaste?
In an empty powder container.

Good thinking.

Offline Mick C

  • Sr. Member
  • ****
  • Posts: 393
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #15 on: August 29, 2019, 12:09:39 AM »
Brilliant!!
My profile picture is my beloved K9 best friend and soulmate, Buster Brown, who passed away in 2018.  I miss you buddy!

Black Jack

  • Guest
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #16 on: October 01, 2019, 10:46:27 PM »
Thought it was going to be a tutorial on toothpaste as a lube. :)

There are so many discussions here about "secret formula" lubes, I wouldn't be surprised if there was a Crest Fluoride lube. Non petroleum and it "seasons" the barrel against cavities.

Offline Terry Reynolds

  • Sr. Member
  • ****
  • Posts: 263
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #17 on: October 02, 2019, 01:29:42 AM »
These work great on goex containers.

aka “digger658”

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2440
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #18 on: October 02, 2019, 03:16:31 AM »
Might be able to provide some color to your gray smoke with that last idea!  That line chalk comes in all sorts of colors!
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Semisane

  • Jr. Member
  • **
  • Posts: 90
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #19 on: October 02, 2019, 04:09:50 AM »
Blue chalk for bucks. Pink for does.
My wife says I'm totally nuts, but I think I'm Semisane.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Re: Pour spout lids for Swiss powder containers (plastic)?
« Reply #20 on: October 02, 2019, 08:33:16 PM »
Just make your own using ctg. cases. Solder for steel lids, CA for plastic.


Daryl

"a gun without hammers is like a spaniel without ears" King George V