« previous next »
Pages: [1]   Go Down

Author Topic: .54 Smoothbore Barrel Weight  (Read 1051 times)

Offline Jerry

  • Hero Member
  • *****
  • Posts: 562
.54 Smoothbore Barrel Weight
« on: September 03, 2019, 04:44:11 AM »
For the gunsmiths. I have only built 20 gauge smoothbores. I would like to know if it’s possible to build a .54 smoothbore with the finished weight being under 8#? Seems like most barrel makers haveA, B, C, and D weight barrels and not taking into consideration caliber. Only focusing on outside
profile. If I’m not correct about this, please let me know. I would really like a .54 smoothbore fowler, but weight is a factor. Thanks.
Logged

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: .54 Smoothbore Barrel Weight
« Reply #1 on: September 03, 2019, 05:36:28 AM »
Call Bobby Hoyt.  Makes a great smoothie barrel in the fashion of old original barrels.  Tell him what you want to accomplish, and he'll build you one, at a great price.
Logged
In His grip,

Dane

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: .54 Smoothbore Barrel Weight
« Reply #2 on: September 03, 2019, 02:00:01 PM »
Quote from: Jerry on September 03, 2019, 04:44:11 AM
For the gunsmiths. I have only built 20 gauge smoothbores. I would like to know if it’s possible to build a .54 smoothbore with the finished weight being under 8#? Seems like most barrel makers haveA, B, C, and D weight barrels and not taking into consideration caliber. Only focusing on outside
profile. If I’m not correct about this, please let me know. I would really like a .54 smoothbore fowler, but weight is a factor. Thanks.
I can make them slightly under 6lbs with a custom profile.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Long John

  • Hero Member
  • *****
  • Posts: 1618
  • Give me Liberty or give me Death
Re: .54 Smoothbore Barrel Weight
« Reply #3 on: September 03, 2019, 04:26:09 PM »
I second the suggestion to contact Robert Hoyt.  He made the barrels for my doublegun with a wall thickness of .075 at the muzzle.  The individual 34' long barrels were right at 3 pounds each.  As it turned out that is too heavy for a doublegun but would be fine for a single barrel gun.

Best Regards,

JMC
John Cholin
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15851
Re: .54 Smoothbore Barrel Weight
« Reply #4 on: September 04, 2019, 10:06:34 PM »
WOW  :o  that's light for a 34 foot barrel, John.  Were they made from Unobtainium?
You could shorten them some to reduce the weight.

just kidding - I know it was a typo, but 28" to 30" for a double would be handier. I do not
know what barrel length is proper for a flinter, but cap-locks came in shorter and longer
lengths.
F of the A West notes one such SxS  at St. Louis that had 48" tubes. The Englishman in the
contest had a SxS with 28", I believe, in 14 bore. Both cap guns.
« Last Edit: September 04, 2019, 10:09:51 PM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Jerry

  • Hero Member
  • *****
  • Posts: 562
Re: .54 Smoothbore Barrel Weight
« Reply #5 on: September 05, 2019, 01:31:34 AM »
Thanks To all for the information. Jerry
Logged
Pages: [1]   Go Up
« previous next »