« previous next »
Pages: [1]   Go Down

Author Topic: Round bladed wood plane  (Read 1716 times)

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Round bladed wood plane
« on: September 11, 2019, 04:08:34 AM »
Anyone seen any plans or how to build a round bottomed wood plan for cutting around cheekpiece?
Logged

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Round bladed wood plane
« Reply #1 on: September 11, 2019, 04:27:51 AM »
Isn't gun making specific, but here is a bull nose plane I need to restore that could probably be modified to work very easily.









Logged

Offline John Archer

  • Sr. Member
  • ****
  • Posts: 364
  • I solemnly swear that I am up to no good
Re: Round bladed wood plane
« Reply #2 on: September 11, 2019, 04:47:56 AM »
I bought a wooden scrub plane from Lee Valley about 6 years ago... it works great for that area of the stock.
Google scrub plane and I’m sure you’ll find something you’ll like.

John
Logged
I cannot be left unsupervised.
(Sent from my immobile dial-operated telephone)

Offline Jason C

  • Full Member
  • ***
  • Posts: 127
Re: Round bladed wood plane
« Reply #3 on: September 11, 2019, 04:52:12 AM »
Here's one on youtube, looks a bit big but probably could adapt it to whatever. I bought a couple different sizes at CLA I think his last  name was Snyder.


Logged

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Round bladed wood plane
« Reply #4 on: September 11, 2019, 05:20:39 AM »
I have two.  One I modified for ramrod grooves, the other I use for concaving cheek pieces.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline KC

  • Sr. Member
  • ****
  • Posts: 459
Re: Round bladed wood plane
« Reply #5 on: September 11, 2019, 06:05:12 AM »
I bought two from Tom Snyder, one for roughing out a barrel channel and one for roughing out a ramrod groove. Google Snyder’s Custom Guns and you should find his contact info. He’s a great guy to deal with.
Logged
K.C. Clem
Bradenton, FL

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Round bladed wood plane
« Reply #6 on: September 11, 2019, 06:49:16 AM »
Quote from: hortonstn on September 11, 2019, 04:08:34 AM
Anyone seen any plans or how to build a round bottomed wood plan for cutting around cheekpiece?

I can’t see how a plane does this job well if you mean defining a cheekpiece after the buttstock is rough shaped.  Is this a rounded cheekpiece? Most rough in with a gouge and finish up with rasps then scrapers or sanding.
Logged
Andover, Vermont

Offline Don Stith

  • Hero Member
  • *****
  • Posts: 2815
Re: Round bladed wood plane
« Reply #7 on: September 11, 2019, 04:38:57 PM »
a No. 50 wood rasp is best tool I have found for that job
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2214
Re: Round bladed wood plane
« Reply #8 on: September 11, 2019, 07:51:41 PM »
Go to YOUTUBE then find Paul Sellers web sight - he shows how to make a low budget molding plane. You can modify the style he shows to what you want but like Don said a wood rasp will do the job ;).
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: Round bladed wood plane
« Reply #9 on: September 11, 2019, 08:52:29 PM »
Thanks for your replies the reason i ask is in MARK SILVERS video TRADITIONAL GUNSTOCKING
he sure makes it look very tempting.
thanks again
« Last Edit: September 12, 2019, 12:09:13 AM by hortonstn »
Logged

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2309
Re: Round bladed wood plane
« Reply #10 on: September 12, 2019, 01:44:03 AM »
Unless you're just set on making one, I'd second contacting Tom Snyder.  He makes quite assortment that are well made and reasonably priced.

Jeff
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell
Pages: [1]   Go Up
« previous next »