« previous next »
Pages: [1]   Go Down

Author Topic: Jewelers saw blades and screws  (Read 1772 times)

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 792
Jewelers saw blades and screws
« on: September 22, 2019, 04:43:36 AM »
    I bought over a hundred saw blades years ago and I'm about out and I forgot where I got them. So who sells the best jewelers saw blade's now ? And how many teeth per inch ? I use them cutting out inlays and patch box's, brass and steel. And I'm about out of oval head wood screws for patch box's and what ever. Where's the best place to buy a box of screws ?  Thanks for the help.     Al
Logged
Alan K. Merrill

Offline RichG

  • Sr. Member
  • ****
  • Posts: 455
Re: Jewelers saw blades and screws
« Reply #1 on: September 22, 2019, 05:20:38 AM »
http://www.blacksmithbolt.com/any size and non plated. not sure about blades.
Logged

Offline bama

  • Hero Member
  • *****
  • Posts: 2162
    • Calvary Longrifles
Re: Jewelers saw blades and screws
« Reply #2 on: September 22, 2019, 05:43:26 AM »
I get blades from Rio Grande jewelry supply. Try to get 2 to 3 teeth per the thickness of the material you are cutting. I use the 2/0 blades I think, I will check tomorrow.
Logged
Jim Parker

"An Honest Man is worth his weight in Gold"

Offline will payne

  • Sr. Member
  • ****
  • Posts: 349
  • AKA dead eye/ Coder /Ethical Hacker
Re: Jewelers saw blades and screws
« Reply #3 on: September 22, 2019, 06:59:16 PM »
Lowes ;)
Or Amazon.
Logged
🕯
Will


"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -Thomas Jefferson

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2517
Re: Jewelers saw blades and screws
« Reply #4 on: September 22, 2019, 07:39:31 PM »
I'm with Bama on this one.  Rio Grande's laser gold are tops.  I cut a LOT of steel with their 2/0 blades - nice line right down the middle of a Sharpie fine line.  Brass is easier cut with a #3, as is hardwood like maple.
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 792
Re: Jewelers saw blades and screws
« Reply #5 on: September 22, 2019, 09:55:47 PM »
    Thanks guy's.  I had forgotten about black smith bolts. I about sure I  got my saw blades at Rio Grande before.   Al
Logged
Alan K. Merrill

Offline G_T

  • Full Member
  • ***
  • Posts: 228
Re: Jewelers saw blades and screws
« Reply #6 on: September 23, 2019, 09:17:22 PM »
You can get Pike sawblades off Amazon. Pike has been a reputable quality blade so it should serve fine.

Gerald
Logged

Online emmagee

  • Jr. Member
  • **
  • Posts: 76
Re: Jewelers saw blades and screws
« Reply #7 on: September 24, 2019, 03:32:22 AM »
I am a retired jeweler/watchmaker.

Don't buy cheap blades, they will not cut straight no matter what you do. Buy Laser Blades from Rio Grande.

Harry
Logged

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 792
Re: Jewelers saw blades and screws
« Reply #8 on: September 24, 2019, 09:03:41 AM »
   Emmagee  thanks.  Al
Logged
Alan K. Merrill

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Jewelers saw blades and screws
« Reply #9 on: September 27, 2019, 04:46:14 PM »
I get screws from either TOW or MBS.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9897
  • Kill a Commie for your Mommy
Re: Jewelers saw blades and screws
« Reply #10 on: October 08, 2019, 08:33:19 AM »
Logged
He who dares not offend cannot be honest. Thomas Paine
Pages: [1]   Go Up
« previous next »