Author Topic: club butt  (Read 4494 times)

Offline Daniel

  • Sr. Member
  • ****
  • Posts: 472
club butt
« on: September 24, 2019, 11:27:15 PM »
I am looking for good pictures of club butt muskets/ fowlers.
Daniel     Ecc.4:12

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: club butt
« Reply #1 on: September 24, 2019, 11:41:01 PM »
Mike Brooks has some good pictures on his web site.
Bob
South Carolina Lowcountry

Offline Jason C

  • Full Member
  • ***
  • Posts: 127
Re: club butt
« Reply #2 on: September 24, 2019, 11:46:45 PM »
Mike Brooks has some good pictures on his web site.
Bob
on his old site http://www.fowlingguns.com/ not very many on his new site yet...

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: club butt
« Reply #3 on: September 25, 2019, 12:16:54 AM »
I have several to build. BUY Grinslade's book on Colonial fowling guns.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19546
Re: club butt
« Reply #4 on: September 25, 2019, 12:33:00 AM »
I have several to build. BUY Grinslade's book on Colonial fowling guns.

Agree. Get the book!  It’s a bargain.
Andover, Vermont

Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: club butt
« Reply #5 on: September 25, 2019, 02:29:36 AM »
Absolutely.  Buy the book.  I've worn mine dogeared . 

Offline Jason C

  • Full Member
  • ***
  • Posts: 127
Re: club butt
« Reply #6 on: September 25, 2019, 02:50:29 AM »

Offline Bob McBride

  • Hero Member
  • *****
  • Posts: 2840
  • TENNESSEE
    • Black Powder TV
Re: club butt
« Reply #7 on: September 25, 2019, 02:52:24 AM »
Flintlock Fowlers.

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: club butt
« Reply #8 on: September 25, 2019, 03:06:48 AM »
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4415
  • We all make mistakes.
Re: club butt
« Reply #9 on: September 25, 2019, 04:28:32 AM »
  Check out Ken Gahagan.  quite sure he can help..

Oldtravler
« Last Edit: September 25, 2019, 11:40:18 PM by Ky-Flinter »

Offline k gahagan

  • Full Member
  • ***
  • Posts: 130
Re: club butt
« Reply #10 on: September 26, 2019, 10:08:53 PM »
Daniel, I would agree that by far Grinslades book on Flintlock Fowlers is the best source for firearms of this sort. I've worn out my first copy and working on my second. If you would like some pictures of the Fowlers I have build using this book for reference I could (I think) post some pictures of Hudson Valley Fowlers, Club butt and New England Fowlers.

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: club butt
« Reply #11 on: September 26, 2019, 10:16:28 PM »
Pls. do Ken!
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline k gahagan

  • Full Member
  • ***
  • Posts: 130
Re: club butt
« Reply #12 on: September 26, 2019, 11:56:40 PM »
Hopefully we have some pictures of various Hudson Valley Fowlers. Some were build from an original I had on loan and some but the information supplied in Tom Grinslades book. Hope they are what yoju had in mind.












Offline k gahagan

  • Full Member
  • ***
  • Posts: 130
Re: club butt
« Reply #13 on: September 27, 2019, 12:04:26 AM »
These pictures are of a Club Butt based on various features from Grinslades book.








Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: club butt
« Reply #14 on: September 27, 2019, 01:51:47 AM »
Outstanding work Ken.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: club butt
« Reply #15 on: September 27, 2019, 03:09:58 AM »
No kidding!!  Thanks for the imagaes.
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19546
Re: club butt
« Reply #16 on: September 27, 2019, 05:31:27 AM »
Should see them in the flesh.
Andover, Vermont

Offline Daniel

  • Sr. Member
  • ****
  • Posts: 472
Re: club butt
« Reply #17 on: September 27, 2019, 06:02:03 AM »
 Thank you Ken very much.

Daniel
Daniel     Ecc.4:12

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: club butt
« Reply #18 on: September 27, 2019, 07:06:59 AM »
Thanks for sharing these, Ken. They are great.
Bob
South Carolina Lowcountry

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: club butt
« Reply #19 on: September 27, 2019, 03:26:36 PM »
Should see them in the flesh.
He'll even let you handle them if you bring your own white gloves.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: club butt
« Reply #20 on: September 28, 2019, 12:20:06 AM »
I had always thought of Club Butts as being quite ungainly, kind of ugly in fact. I think it was mostly older, B & W pictures that I had seen.
The club butt rifles above are, very simply, very beautiful.  And they seem to "want" you to go shoot them.  They are sleek, graceful, and well engineered - so thanks for enlightening me.
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: club butt
« Reply #21 on: September 28, 2019, 02:34:43 AM »
I had always thought of Club Butts as being quite ungainly, kind of ugly in fact. I think it was mostly older, B & W pictures that I had seen.
The club butt rifles above are, very simply, very beautiful.  And they seem to "want" you to go shoot them.  They are sleek, graceful, and well engineered - so thanks for enlightening me.
They are my favorite style for making Turkey Mashers, the architecture is excellent for big bores with heavy loads.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: club butt
« Reply #22 on: September 28, 2019, 04:54:55 PM »
What kind of weight do they have, Mike?  I do like big bores/heavy loads, but life has placed me in a condition where I have to start lightening up the "bump".  I have always enjoyed the "turkey smashers".  Next rifle will be a .62 Don Stith- I also like reaching out for a paper target or steel gong, and there is almost no way to escape the heavier recoil except to raise the weight of the rifle a bit.
I guess I could also stick one or two of Brownell's mercury-filled recoil tubes into the butt....  Several years ago I made a 12 ga for a fellow with a separated shoulder.  Put three of those in the stock, and it could be fired with one hand.  Not any room for a patch box though.
Could be that the lowered butt of the club-butt could help re-direct some of the energy.
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3481
Re: club butt
« Reply #23 on: September 28, 2019, 05:20:11 PM »
Lovely work Ken.  Outstanding!

I have an old (1690-1710) barrel marked to Thomas Bannister, and these photos are getting me all enthused to get it stocked and locked  once again!
(54" barrel).

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4415
  • We all make mistakes.
Re: club butt
« Reply #24 on: September 28, 2019, 06:19:14 PM »
  Ken an Mike do excellent work. They are an interesting style of gun. Pay attention to what these guy's tell you.  Thanks for posting Ken..
Oldtravler