« previous next »
Pages: [1]   Go Down

Author Topic: 1967 Andrew Fautheree Hawken style rifle  (Read 3776 times)

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
1967 Andrew Fautheree Hawken style rifle
« on: October 19, 2019, 03:11:53 AM »
This is for the old timers. Today I acquired a Hawken style rifle made in 1967 by Andrew Fautheree. He was a fine builder. It is in as new condition. I’m not sure it’s ever been fired. The good news when I got it home is the stamp on the barrel. W.M. Large. Darn thing is heavy with a 36” 1” barrel mostly because it’s a .45!  Thought I was getting a .50.

Interesting to see Hawken-styled rifles built back then. A couple oddities: it has a set trigger that must be set. The lock is nice but has a coil spring. Stamped on the inside “1967 A.M. OSTERMAN — MAKER”

















Logged
Andover, Vermont

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #1 on: October 19, 2019, 04:33:51 PM »
Good morning Richard,  couple years back I had a very fine A Fautheree Hawken with a Large barrel.
I will look at my computer pictures later and post if you would like to see them.
Sold it to a feller in California.

Have a wunnerful day bro, Dave
Logged

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #2 on: October 21, 2019, 02:50:08 AM »
Hi Rich, I am pretty sure the one I had also had Osterman coil spring lock. Mr Fautheree did/does beautiful work. Dave

My friend Bob W has one or two 60's vintage coil spring lock . 8) 8)
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #3 on: October 21, 2019, 03:35:41 AM »
I believe Andrew Fautheree passed away in 1994. I think he made a wide range of styles of guns.
Logged
Andover, Vermont

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #4 on: October 21, 2019, 03:41:29 AM »
Rich, I had communication via email from him about 2012 or there abouts. He was in Colorado then. I also had a Fordny style flint/percussion beautiful rifle, sold it ,too. Have pics  Dave 8) 8)
I will see if I have his address if you want
Logged

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #5 on: October 21, 2019, 04:14:16 AM »
Don’t know if it was the same guy, but I used to shoot BP cartridge rifle silhouette with an Andy Fautheree at Effingham, Illinois in 2003-2006 or so. I really miss shooting with those guys.

Greg
Logged
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline lexington1

  • Hero Member
  • *****
  • Posts: 536
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #6 on: October 21, 2019, 04:56:06 PM »
I used to go to the shoots with Andy quite a bit when I lived in Colorado. I've lost touch with him, but I believe he is still alive. He is a fine gun builder and a great person.
Logged

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1104
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #7 on: October 28, 2019, 10:59:40 PM »
I had my eyes on that one! It looks real nice. Congrats.
Logged
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #8 on: October 29, 2019, 01:03:51 AM »
That is a fine looking Hawken to my eye.  I'd stain that ramrod, but that is just me. 

Have you shot it?  I am curious about the orientation of Bill Large's name on the angled flat.  If Bill meant that to be oriented down, which many barrel makers do, it may end up with misoriented run out.  Leaves the sights hanging off to the side.  I really hope that isn't the case on such a fine looking rifle. 

Mr Fautheree sure could build.  Thank you for sharing it. 

God Bless,   Marc
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #9 on: October 29, 2019, 04:40:59 AM »
The gun shoots straight. It had never been sighted in. The front sight was tall and untouched. It was shooting mighty low as delivered. All good now.
Logged
Andover, Vermont

Offline mesabi

  • Starting Member
  • *
  • Posts: 21
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #10 on: October 29, 2019, 08:43:58 PM »
I was watching that auction; glad somebody on this forum snagged it!  I was bird hunting in Montana and the auction house didn't make it easy to bid, so I decided to concentrate on the hunting.  You got it for a good price.

I think Fautheree still had classified ads for rifle building in Muzzle Blasts about 15 years ago; not sure what his status is now.  I've only handled two or three or his rifles, but I've always thought that he was one of the better builders from the days of the old "Hawken Craze".
Logged

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #11 on: October 29, 2019, 09:13:06 PM »
Glad you are enjoying this fine Hawken,Rich. The one I had didn't appear to have ever been fired. Those were the days,eh?
I am glad to see renewed interest in Hawkens today. I had 3 on gunsinternational,and all have new homes,and getting enjoyed.
Best regards, Dave F 8) 8)
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #12 on: October 29, 2019, 10:04:57 PM »
Dave, now I’ve got to build one for myself in the next year. Probably walnut full-stocked J&S is what I’m thinking. Still hunting for a breechplug.
Logged
Andover, Vermont

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #13 on: October 30, 2019, 03:21:03 AM »
Tell me again what plug you lookin for, and barrel size, Seems you are after a 1 1/8 "comma" plug. Dave 8) 8)
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #14 on: October 30, 2019, 04:26:40 AM »
Yep. Either a comma or a “conquistador helmet” style in 1 and 1/8” for a .54. Have to check the threads.
Logged
Andover, Vermont

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: 1967 Andrew Fautheree Hawken style rifle
« Reply #15 on: October 30, 2019, 04:36:01 AM »
Only thing I have is for 1' barrel, 3/4 16,and conquistador style. I will keep my peepers open.
I am still working on my version of what you want to do. Mostly fit up, some shaping. Was fortunate to get a comma plug with some parts. This rifle is stocked in cherry. Have a goodun, Dave 8) 8)
Logged
Pages: [1]   Go Up
« previous next »