Author Topic: Colerain 54 load advice  (Read 1291 times)

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 640
Colerain 54 load advice
« on: October 25, 2019, 03:31:39 AM »
Just finished a Haines 54 colerain c wt 1-56  any clues on a 60 yd paper target load
 Chambers flintlock
Thanks

Online smylee grouch

  • Hero Member
  • *****
  • Posts: 7628
Re: Colerain 54 load advice
« Reply #1 on: October 25, 2019, 04:35:35 AM »
Same as any other 54 barrel, 50 gr of 2f starting load and shoot it to find out. Keep track of every combination,s results.

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1520
Re: Colerain 54 load advice
« Reply #2 on: October 25, 2019, 05:00:35 AM »
I have a C weight .54 Colerain on my Virginia rifle. For trail walks and such, 65 grains of 2f Schuetzen, a .530 Hornady ball, and .020 Ox Yoke patch shoots pretty good. My hunting load is the same ball and patch, and 90 grains of 3f Schuetzen...shoots just as accurately and hits like the hand of God.

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Bigmon

  • Hero Member
  • *****
  • Posts: 1279
Re: Colerain 54 load advice
« Reply #3 on: October 26, 2019, 02:51:26 AM »
I have been shooting that same rifle for 30 years.  75Gr FFG I use for target and hunting.  I have tried FFFG and can't quite get it to shoot the same.  But maybe I am using too much powder with FFFG?  I shoot .535 RB & .018 patch.

Offline Darkhorse

  • Hero Member
  • *****
  • Posts: 1657
Re: Colerain 54 load advice
« Reply #4 on: October 26, 2019, 11:44:55 AM »
For a 50 to 65 yard target I'd load 65 grains of 3fg and a patched round ball. The 1-56 twist is very versatile, mine shoots good with practically every load I've ever tried, from less than 50 grains to 80 which is my hunting load. For accuracy I use old LeHigh Valley or Mr. Flintlocks lube. These are wet lubes and clean as they load. But they don't work well for hunting as they evaporate, so for hunting I use a grease type lube.

American horses of Arabian descent.