« previous next »
Pages: [1]   Go Down

Author Topic: Easy metal finish for a Kibler SMR?  (Read 1956 times)

Offline Mountaingoat

  • Starting Member
  • *
  • Posts: 14
Easy metal finish for a Kibler SMR?
« on: November 07, 2019, 06:32:31 PM »
I'm finishing up my Kibler SMR kit this weekend. Wood has its first couple coats of oil, and the metal is getting some finishing touches this evening.

I'm hoping to end up with a some sort of gray finish in the end result. And ideally id like to do it without having to order anything.

Would it be an absolute disgrace to hit the metal with some cold blue and buff it back with some scotch Brite or steel wool? I tested a piece of barrel flat on the bottom and it looks alright to me.

I've heard of mustard, vinegar, and a couple others. Not wanting to get into boiling bleach or charcoal bluing.

Any advice? I appreciate it fellas!
Logged

Offline Mountaingoat

  • Starting Member
  • *
  • Posts: 14
Re: Easy metal finish for a Kibler SMR?
« Reply #1 on: November 07, 2019, 06:33:16 PM »






Logged

Offline Prospector8083

  • Jr. Member
  • **
  • Posts: 56
Re: Easy metal finish for a Kibler SMR?
« Reply #2 on: November 07, 2019, 07:07:22 PM »
Jim has a video where he uses a brass tarnishing chemical to brown/antique the metal parts,I am planning on trying it when I receive my Kibler kit. I don't remember the name but supposedly you can buy it on historichouseparts.com although I was unable to find it on their website. I would love to hear about other members who have tried that method although if Jim uses it that speaks volumes! Nice job on the finish! what kind of wood?
Logged

Offline Mountaingoat

  • Starting Member
  • *
  • Posts: 14
Re: Easy metal finish for a Kibler SMR?
« Reply #3 on: November 07, 2019, 07:10:30 PM »
Thanks Prospector! It's "fancy walnut" the first upgrade.

I just sanded it to 220 and rubbed on some Tried and True Varnish Oil. First time using it and I really like the stuff so far.
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19487
    • GillespieRifles
Re: Easy metal finish for a Kibler SMR?
« Reply #4 on: November 07, 2019, 07:23:43 PM »
The cold blue/buff you describe is fine, I have used it and others here on ALR do the same thing. Have at it :)
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Prospector8083

  • Jr. Member
  • **
  • Posts: 56
Re: Easy metal finish for a Kibler SMR?
« Reply #5 on: November 07, 2019, 08:33:27 PM »
Would you happen to know the name of the product and possibly the order code? I am no computer expert but did an unsuccessful search.
Logged

Offline Mountaingoat

  • Starting Member
  • *
  • Posts: 14
Re: Easy metal finish for a Kibler SMR?
« Reply #6 on: November 07, 2019, 08:50:20 PM »
Quote from: Prospector8083 on November 07, 2019, 08:33:27 PM
Would you happen to know the name of the product and possibly the order code? I am no computer expert but did an unsuccessful search.

Historic Houseparts Brass Darkening Solution
https://www.historichouseparts.com/shop/item.aspx?itemid=2431

I'd use that if I had it, but I can't find it locally. I'm looking to have this gun ready to roll by the weekend!
Logged

Shane A Gress

  • Guest
Re: Easy metal finish for a Kibler SMR?
« Reply #7 on: November 07, 2019, 08:57:18 PM »
Look on Jim's website for Patina solution. That might be what your thinking of. I'm sure if you call he will be glad to help.
Logged

Offline Prospector8083

  • Jr. Member
  • **
  • Posts: 56
Re: Easy metal finish for a Kibler SMR?
« Reply #8 on: November 07, 2019, 09:25:11 PM »
Plum brown works good and fast.Don't get in a hurry or set deadlines! Relax and enjoy the experience. Go borrow a gun if you want to shoot
Logged
Pages: [1]   Go Up
« previous next »