Author Topic: Joe Schell 40 cal  (Read 3473 times)

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Joe Schell 40 cal
« on: January 24, 2021, 09:11:20 PM »
Joe made me another iron mounted rifle in the woodsrunner pattern. Started out with a hard heavy slab sawn piece of sugar maple from Brian Huffman. The barrel is a Bob Hoyt 40 cal b weight thats 39 an half inches long. The lock is a Chambers early ketland. Joe hand forged all the hardware. The front sight is a 1962 silver quarter my birth yr and the thumbpiece is a 1936 silver quarter which is my mothers birth yr. The diamond on the trigger guard is small pirce of the quarter left over from the front sight. The stock is Nitric acid an a beeswax finish. The metal is nitric acid an allowed to rust on its own then boiling water blued. Joe done a great job thinning this little rifle down. It balances really good an points even better.













Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Daniel Coats

  • Hero Member
  • *****
  • Posts: 1292
Re: Joe Schell 40 cal
« Reply #1 on: January 24, 2021, 09:16:37 PM »
Congratulations on owning such a special rifle with a personal connection! It has an amazing look to it too!
Dan

"Ain't no nipples on a man's rifle"

Offline Tilefish

  • Full Member
  • ***
  • Posts: 173
Re: Joe Schell 40 cal
« Reply #2 on: January 24, 2021, 10:01:20 PM »
Absolute beautiful rifle. I have one in the works with Joe. After seeing yours I am glad he is building it.
Chad

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3664
Re: Joe Schell 40 cal
« Reply #3 on: January 25, 2021, 01:18:47 AM »
What a warm and beautiful looking gun. One I’d love to own. 

Offline R.J.Bruce

  • Sr. Member
  • ****
  • Posts: 375
Re: Joe Schell 40 cal
« Reply #4 on: January 25, 2021, 03:29:35 AM »
I like that a LOT!!!! Is that a Bobby Hoyt gain twist barrel?

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2394
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Joe Schell 40 cal
« Reply #5 on: January 25, 2021, 04:34:14 AM »
Nice rifle and wonderful tribute my friend.  Careful runnin thru the woods with that'n. Best regards, Dave F 8)

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Re: Joe Schell 40 cal
« Reply #6 on: January 25, 2021, 12:31:23 PM »
I like that a LOT!!!! Is that a Bobby Hoyt gain twist barrel?

No sir. Its his standard rifling an 1 in 48 twist if I remember correct
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Percy

  • Full Member
  • ***
  • Posts: 215
Re: Joe Schell 40 cal
« Reply #7 on: January 25, 2021, 05:35:32 PM »
Beautiful rifle. I really like the steel hardware and dark finish on the stock.

Percy

Online BOB HILL

  • Hero Member
  • *****
  • Posts: 2232
Re: Joe Schell 40 cal
« Reply #8 on: January 25, 2021, 06:57:31 PM »
Beautiful rifle. Nice forge work, Joe. That always adds so much to a rifle.
Bob
South Carolina Lowcountry

Offline sqrldog

  • Hero Member
  • *****
  • Posts: 985
Re: Joe Schell 40 cal
« Reply #9 on: January 26, 2021, 12:36:03 AM »
Nice rifle Allen. One day I want Joe to build me a Woodsrunner in a big bore rifle. I think it would be comfortable to shoot. Nice forge work. Tim

Offline Panzerschwein

  • Hero Member
  • *****
  • Posts: 528
Re: Joe Schell 40 cal
« Reply #10 on: January 26, 2021, 05:31:04 AM »
That barrel length fits that gun nicely.

Offline DBoone

  • Full Member
  • ***
  • Posts: 190
Re: Joe Schell 40 cal
« Reply #11 on: January 29, 2021, 10:44:30 PM »
Joe does great work!  Always love to see what he comes up with.  Excellent!

Offline Keith Zimmerman

  • Hero Member
  • *****
  • Posts: 675
Re: Joe Schell 40 cal
« Reply #12 on: January 30, 2021, 06:01:40 AM »
I love it!  The lines and everything just seem to flow together.

Offline Top Jaw

  • Hero Member
  • *****
  • Posts: 552
Re: Joe Schell 40 cal
« Reply #13 on: January 31, 2021, 01:16:49 AM »
That stock came out better than I remembered the blank being.  😀
You have another nice rifle there! 

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Re: Joe Schell 40 cal
« Reply #14 on: January 31, 2021, 02:54:40 AM »
Thanks everyone for the nice comments. I have put a few rounds thru the gun just enough to tell its gonna do pretty good. The sights were perfect for windage without touching them and the front needs to come down quite a bit when I see what the tightest load combo will be. Lock is very fast an sparks like my uncles old Lincoln 225 stick welder. I think the lock is gonna be pretty easy on flints as the flint is still good an sharp after 15 rounds.
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Re: Joe Schell 40 cal
« Reply #15 on: January 31, 2021, 03:01:02 AM »
Nice rifle Allen. One day I want Joe to build me a Woodsrunner in a big bore rifle. I think it would be comfortable to shoot. Nice forge work. Tim

Tim I dont think you could go wrong with this pattern. My 62 Woodrunner Joe built me is very comfortable to shoot. I would recommend this pattern for anyone planning to build a large bore gun
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Re: Joe Schell 40 cal
« Reply #16 on: January 31, 2021, 03:05:30 AM »
That stock came out better than I remembered the blank being.  😀
You have another nice rifle there!

Brian this is the second time you have done me right with your stock blanks. Joe said both blanks you sold me for both my woodsrunner rifles were pleasure's to work an carve
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline GANGGREEN

  • Sr. Member
  • ****
  • Posts: 373
Re: Joe Schell 40 cal
« Reply #17 on: January 31, 2021, 04:01:01 PM »
Can you describe this "woodsrunner" pattern?   It's lovely, just curious if it's a copy of a specific school or from a specific builder or just what Joe may have come up with.   

Offline Frank Barker

  • Hero Member
  • *****
  • Posts: 570
Re: Joe Schell 40 cal
« Reply #18 on: January 31, 2021, 05:25:28 PM »
WOW Allen.... That is a beautiful rifle, would you put me in your will. Hope all is well with you and congrats of another fine rifle gun.
Kind Regards
Frank Barker

Offline Tecumseh

  • Jr. Member
  • **
  • Posts: 84
Re: Joe Schell 40 cal
« Reply #19 on: January 31, 2021, 09:32:28 PM »
Outstanding rifle! Beautiful craftsmanship and great piece wood, well done.

Offline sqrldog

  • Hero Member
  • *****
  • Posts: 985
Re: Joe Schell 40 cal
« Reply #20 on: January 31, 2021, 10:32:20 PM »
The "Woodsrunner " rifle is an early original rifle. Just do a search and you will find lots of info. I believe Jim Parker "Bama" has an extensive library of pictures made when he had access to the rifle. Tim

Offline GANGGREEN

  • Sr. Member
  • ****
  • Posts: 373
Re: Joe Schell 40 cal
« Reply #21 on: January 31, 2021, 11:06:53 PM »
The "Woodsrunner " rifle is an early original rifle. Just do a search and you will find lots of info. I believe Jim Parker "Bama" has an extensive library of pictures made when he had access to the rifle. Tim

Thank you, I'll do a search, here and elsewhere.  As I said, the one posted above is lovely.

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2048
Re: Joe Schell 40 cal
« Reply #22 on: January 31, 2021, 11:12:17 PM »
If I remember correct the woodsrunner is in Rifles of Colonial America vol 2
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning