Author Topic: Jim Chambers oil finish?  (Read 6383 times)

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2447
Re: Jim Chambers oil finish?
« Reply #25 on: June 10, 2021, 07:55:25 AM »
P. W., give Brownell's product Five "F"  Stock rubbing compound a try.  It has an abrasive suspended in a liquid that you rub in with a soft cloth or a felt pad.  you can pretty much control the gloss or stain look you want by how much and how hard you rub.  It will also do a splendid job of cleaning up the scratches in plexiglass, as an example.  And yes, I have tried pumice and rottenstone.  kept winding up with a "grand piano finish"!
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2162
Re: Jim Chambers oil finish?
« Reply #26 on: June 10, 2021, 06:22:27 PM »
Thanks for the info - I will give it a try ;)
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb