Author Topic: Chronographed the 46 inch barreled 45 caliber SMR  (Read 1277 times)

Offline Leatherbark

  • Sr. Member
  • ****
  • Posts: 376
Chronographed the 46 inch barreled 45 caliber SMR
« on: September 04, 2020, 01:15:47 AM »
For what it is worth I shot 5 across the chronograph last week with my Kibler 45 caliber SMR with 46 inch barrel.  I used 65 grains of Goex 3fg a .018 ticking patch lubed with LHV and a .440 Speer ball.

 The 5 shots averaged 1795 fps

Offline Bob McBride

  • Hero Member
  • *****
  • Posts: 2840
  • TENNESSEE
    • Black Powder TV
Re: Chronographed the 46 inch barreled 45 caliber SMR
« Reply #1 on: September 04, 2020, 01:27:41 AM »
That correlates to what I've found in mine with the same load but with .022 patching. I used Swiss and was pushing 2000fps. That's just enough to set off Tannerite, which is nice.

Offline RichG

  • Sr. Member
  • ****
  • Posts: 455
Re: Chronographed the 46 inch barreled 45 caliber SMR
« Reply #2 on: September 06, 2020, 07:35:32 PM »
55 gr Old Eynsford .445rb .020 patch, wet lube, Colerain round groove barrel, 1800fps. Was hoping a lighter charge would shoot better for trail work.
70 gr Old Eynsford .435rb .015 patch , mink oil 1980fps. Anything lighter wont shoot and 80gr load blows patches. Was using 75gr Goex with this load and getting 1950fps. Old Eynsford seems to require 5-10% less powder than the Goex I was using.