AmericanLongRifles Forums
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Login
Register
AmericanLongRifles Forums
»
General discussion
»
Gun Building
»
Equisetum (scouring rush) for de-whiskering and burnishing
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Equisetum (scouring rush) for de-whiskering and burnishing (Read 1222 times)
rich pierce
Administrator
Hero Member
Posts: 19446
Equisetum (scouring rush) for de-whiskering and burnishing
«
on:
September 23, 2020, 10:15:18 PM »
Equisetum, horsetail, or scouring rush is my favorite abrasive to de-whisker following staining with water-based stains. I gather a half dozen stalks now and then and let them dry. Flatten, cut to short lengths, and get to it. The stems contain silica but do not shed, and are about 1200 grit as far as I can guess. I’m finishing up a cherry stock now and find it handy. When cleanly cut one can scootch up close to relief carving pretty easily. It may not offer big advantages over Scotchbrite pads but it’s much better than fine steel wool in my experience in that it does not shed or embed in the wood. Plus it’s entertaining and I like having fun.
Logged
Andover, Vermont
577SXS
Sr. Member
Posts: 379
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #1 on:
September 23, 2020, 10:25:27 PM »
That's very interesting. I'll have to see if I can find some to try. I hate whiskering a stock too!
That looks like a little rough spot in the Cherry!
Logged
rich pierce
Administrator
Hero Member
Posts: 19446
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #2 on:
September 23, 2020, 10:56:00 PM »
Cherry seems very porous and the grain raises a lot in cross-grain areas. Flat grain areas don’t raise as much grain and take on less stain. Different ballgame than maple for sure.
Logged
Andover, Vermont
smallpatch
Hero Member
Posts: 4104
Dane Lund
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #3 on:
September 24, 2020, 03:33:48 AM »
Cmon Rich,
Now you’re just showin off!
Logged
In His grip,
Dane
rich pierce
Administrator
Hero Member
Posts: 19446
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #4 on:
September 24, 2020, 05:29:23 AM »
Quote from: smallpatch on September 24, 2020, 03:33:48 AM
Cmon Rich,
Now you’re just showin off!
Gilding the lily, for sure.
Logged
Andover, Vermont
Herb
Hero Member
Posts: 1709
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #5 on:
September 24, 2020, 05:35:42 AM »
When I was at Lower Souris Refuge in North Dakota in the mid '60s doing range surveys, I noticed a lot of Equisetum in road ditches in the sandhills, but a 3-wire fence kept it out of the grazed grassland........
Logged
Herb
smart dog
Global Moderator
Hero Member
Posts: 6992
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #6 on:
September 24, 2020, 01:58:30 PM »
Hi Rich,
I believe using horsetails for sanding is described in Wolf's book on jaeger rifles. The big full color one sold through Jim Chambers some years ago.
dave
Logged
"The main accomplishment of modern economics is to make astrology look good."
Robert Wolfe
Hero Member
Posts: 1285
Great X Grandpa
Re: Equisetum (scouring rush) for de-whiskering and burnishing
«
Reply #7 on:
September 24, 2020, 09:29:07 PM »
Equisetum is also called "scouring rush" and has been used at various times and places for scouring pots and pan, by the Roman's for instance.
Logged
Robert Wolfe
Northern Indiana
Print
Pages: [
1
]
Go Up
« previous
next »
AmericanLongRifles Forums
»
General discussion
»
Gun Building
»
Equisetum (scouring rush) for de-whiskering and burnishing