« previous next »
Pages: [1]   Go Down

Author Topic: 6/32 front lock screws  (Read 2319 times)

Offline yip

  • Hero Member
  • *****
  • Posts: 1053
6/32 front lock screws
« on: September 28, 2020, 06:14:18 PM »
  awhile ago i read on this site about 6/32 front lock screws, fletho disgusted  this about making the r/r hole a liitle closer to the barrel channel ( a slim looking rifle) . where can these be bought?
Logged

Offline Kevin Houlihan

  • Sr. Member
  • ****
  • Posts: 310
Re: 6/32 front lock screws
« Reply #1 on: September 28, 2020, 06:32:59 PM »
Yip,
 I got mine from Muzzleloader Builders Supply.
Kevin
Logged

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4113
  • Dane Lund
Re: 6/32 front lock screws
« Reply #2 on: September 28, 2020, 06:58:37 PM »
Yep,
MLBS or TOW.
Logged
In His grip,

Dane

Offline Dale Halterman

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2695
Re: 6/32 front lock screws
« Reply #3 on: September 28, 2020, 08:22:59 PM »
Think I bought mine from Dixon's.

Dale H
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19642
Re: 6/32 front lock screws
« Reply #4 on: September 28, 2020, 08:25:54 PM »
Quote from: Dale Halterman on September 28, 2020, 08:22:59 PM
Think I bought mine from Dixon's.

Dale H

Best place to shop. Long commute for me though.
Logged
Andover, Vermont

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4113
  • Dane Lund
Re: 6/32 front lock screws
« Reply #5 on: September 28, 2020, 09:05:15 PM »
Rich,
I got you beat on that drive,
Logged
In His grip,

Dane

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9739
Re: 6/32 front lock screws
« Reply #6 on: September 28, 2020, 10:23:33 PM »
Quote from: yip on September 28, 2020, 06:14:18 PM
  awhile ago i read on this site about 6/32 front lock screws, fletho disgusted  this about making the r/r hole a liitle closer to the barrel channel ( a slim looking rifle) . where can these be bought?
If I were to use a .130 diameter screw I would make it a 6x40 or 48 to
get a few more threads thru the lock plate .
Bob Roller
Logged

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: 6/32 front lock screws
« Reply #7 on: September 28, 2020, 10:52:40 PM »
I've always used a #6-32 front  lock bolt because of the smaller dia  and   32 TPI is quite sufficient for the job that  the bolt has to do.....just to hold the lock in its mortice. Its also widely available. Have had zero problems using it.....Fred
Logged

Offline Algae

  • Full Member
  • ***
  • Posts: 201
Re: 6/32 front lock screws
« Reply #8 on: September 28, 2020, 11:23:16 PM »
Ditto to what Fred said. ;)

Al Jenkins
Logged

Offline FALout

  • Hero Member
  • *****
  • Posts: 875
Re: 6/32 front lock screws
« Reply #9 on: September 29, 2020, 02:16:35 AM »
Mine have been on back order with track for about 6 months.  I don’t always use them, but when the space is small they are great to have around.
Logged
Bob

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 434
Re: 6/32 front lock screws
« Reply #10 on: September 29, 2020, 03:16:06 AM »
Try Blacksmith bolt.
http://www.blacksmithbolt.com/
Logged

Offline Karl Kunkel

  • Hero Member
  • *****
  • Posts: 979
Re: 6/32 front lock screws
« Reply #11 on: September 29, 2020, 03:34:54 AM »
I think I got mine through TOW.
Logged
Kunk

Offline RAT

  • Hero Member
  • *****
  • Posts: 699
Re: 6/32 front lock screws
« Reply #12 on: October 03, 2020, 04:30:07 AM »
I chuck an 8-32 lock bolt in the lathe and turn it down and re-thread it.
Logged
Bob

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2930
Re: 6/32 front lock screws
« Reply #13 on: October 03, 2020, 04:36:49 AM »
I make my own.
Logged
VITA BREVIS- ARS LONGA

Offline dstock

  • Full Member
  • ***
  • Posts: 171
Re: 6/32 front lock screws
« Reply #14 on: October 03, 2020, 05:00:14 AM »
I make all of my lock bolts and tang bolts. But,I have a lathe and that makes it easy.
GOD Bless
Doug B
Logged
God Bless
Doug B
Pages: [1]   Go Up
« previous next »