« previous next »
Pages: [1]   Go Down

Author Topic: Horn With Two Bands  (Read 1532 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Horn With Two Bands
« on: October 03, 2020, 10:55:02 PM »
 It is about 13 1/2" around the outside curve and 11 tip-to-tip. The Walnut butt is hollowed out about 3/4s its length, I used a 1 3/4s Forstner bit on it so it add quite a bit of space. It is tapped 1-6 for the Hickory finial and held in place by the same four iron pins that hold the band. The tip is horn and is threaded 1/2-13, the antler collar is held on by the tip. The band is held by three iron pins.


   Tim C.














« Last Edit: January 02, 2021, 06:35:29 PM by Tim Crosby »
Logged

Offline MuskratMike

  • Hero Member
  • *****
  • Posts: 2260
Re: Horn With Two Bands
« Reply #1 on: October 03, 2020, 11:29:10 PM »
Tim: I truly, truly love your work. You are a master of your craft!
Logged
"Muskrat" Mike McGuire
Keep your eyes on the skyline, your flint sharp and powder dry.

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Horn With Two Bands
« Reply #2 on: October 04, 2020, 12:39:08 AM »
If a banded horn can have “all the bells and whistles” this one does.  Great architecture and balance in a compact package.  A real beauty.  God bless, Marc
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Horn With Two Bands
« Reply #3 on: October 04, 2020, 08:11:18 PM »
That is a bold horn, particularly given it's small size.   It definitely makes a statement, and I appreciate how difficult it must have been to fit a base band that wide and thick. 
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Horn With Two Bands
« Reply #4 on: October 05, 2020, 03:21:49 PM »
Neat horn, Tim.
Bob
Logged
South Carolina Lowcountry

Offline Cosmo

  • Starting Member
  • *
  • Posts: 22
Re: Horn With Two Bands
« Reply #5 on: October 06, 2020, 12:34:15 AM »
Amazing horn! How do you/what tool(s) are you using to cut the threads?
Logged
“If you are an American, you must allow all ideas to circulate freely in your community, not merely your own.”  Kurt Vonnegut

Offline Mike Lyons

  • Hero Member
  • *****
  • Posts: 1242
  • Afghanvet
Re: Horn With Two Bands
« Reply #6 on: October 06, 2020, 12:48:58 AM »
Is that considered a beehive butt?  That style is my favorite.  Beautiful horn.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Horn With Two Bands
« Reply #7 on: October 06, 2020, 03:30:01 PM »
Quote from: Cosmo on October 06, 2020, 12:34:15 AM
Amazing horn! How do you/what tool(s) are you using to cut the threads?
 
  Here is a Pic of the tools. They are available in 1/2, 3/4 and 1". In the second Pic you can see how I reduced the thickness of the guide plate so I can thread farther down. The guide can be taken off once the threads are run down to it and a few more can be cut.

  Tim




Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Horn With Two Bands
« Reply #8 on: October 06, 2020, 03:33:22 PM »
Quote from: Mike Lyons on October 06, 2020, 12:48:58 AM
Is that considered a beehive butt?  That style is my favorite.  Beautiful horn.

 Mike, I would say yes but modified. You won't see many true "Bee Hive" butts with what I would call a Wasp waist or a screw in finial.   

   Tim
Logged
Pages: [1]   Go Up
« previous next »