« previous next »
Pages: [1]   Go Down

Author Topic: And Yet Another Banded Horn  (Read 3770 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
And Yet Another Banded Horn
« on: August 21, 2009, 05:09:59 PM »
 This one is about 13" around the outside curve. The base is either cherry or maple, I forget which, it is hollowed out and a groove is turned in the outer edge so the horn fits in side of it. It is then pinned through the base, throught the horn back into the wood. The base is about 2 5/8" across. The three turned bands are of horn and are held on by two small steel pins each. The tip is of turned antler and is 2 1/4", it is held on by two small steel oins, the stopper is cherry.

 Tim C.


 

« Last Edit: August 21, 2009, 05:11:30 PM by Tim Crosby »
Logged

Offline Brian

  • Hero Member
  • *****
  • Posts: 6364
Re: And Yet Another Banded Horn
« Reply #1 on: August 21, 2009, 06:49:08 PM »
Very nice Tim.  You sure have this "turning" down to a science with the plugs, tips, and bands you make.  If you don't mind me asking, what kind of lathe are you using to do that?  I'm assuming it's a wood lathe?  How big?
Logged
"This is my word, and as such is beyond contestation"

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: And Yet Another Banded Horn
« Reply #2 on: August 21, 2009, 09:37:36 PM »
Tim, another great looking horn.  I like the idea of 'insetting' the lip of the base plug to house the horn.  Perfect.  Thanks for sharing another great banded horn. 
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: And Yet Another Banded Horn
« Reply #3 on: August 22, 2009, 07:43:45 PM »
Tim, I may have to attend the Log Cabin's horn making class in October to try to learn a few more things.  Are you still planning on conducting that seminar?   ;)
I thought some of the guys (or gals) would like to know just in case they'd like to look at some of your horns in person.  Oh, will a lathe be there too?
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: And Yet Another Banded Horn
« Reply #4 on: August 22, 2009, 09:41:07 PM »
Quote from: G. Elsenbeck on August 22, 2009, 07:43:45 PM
Tim, I may have to attend the Log Cabin's horn making class in October to try to learn a few more things.  Are you still planning on conducting that seminar?   ;)
I thought some of the guys (or gals) would like to know just in case they'd like to look at some of your horns in person.  Oh, will a lathe be there too?
Gary

 Gary,
  It is going to be a VERY basic class all done with hand tools, no turning involved. At the end of day two or maybe before I hope to have everyone confident enough to move out on their own and have a finished horn in hand. I plan on cutting tips and drilling as a group as I think it is the most intimidating part of horn making for a beginner.
 We'll see how things go.

 Tim C.
 
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: And Yet Another Banded Horn
« Reply #5 on: August 22, 2009, 09:45:27 PM »
If I thought I could get out there for a couple of days I'd be your trusty assistance, Igor  ;D
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: And Yet Another Banded Horn
« Reply #6 on: August 22, 2009, 09:55:38 PM »
Tim,
Another great looking horn.  I agree you have the banded horns down pat.  They are my favorite and I enjoy seeing everyone you make.  Thanks for sharing.
Ken
Logged
Failure only comes when you stop trying.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: And Yet Another Banded Horn
« Reply #7 on: August 23, 2009, 12:22:17 AM »
Quote from: Brian Dancey on August 21, 2009, 06:49:08 PM
Very nice Tim.  You sure have this "turning" down to a science with the plugs, tips, and bands you make.  If you don't mind me asking, what kind of lathe are you using to do that?  I'm assuming it's a wood lathe?  How big?

 Hi Brian,
   I have a Rikon mini lathe, it has a 12" swing and speed ranges from 430 to 3900.
I run it about 800 for everything I do on horns. It has a MT2 which is handy.

 Tim C.
Logged
Pages: [1]   Go Up
« previous next »