Author Topic: My "New" Krider Rifle  (Read 1787 times)

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 992
    • Black Powder Historian
My "New" Krider Rifle
« on: October 20, 2020, 12:59:16 AM »
This rifle from John Krider's has Krider markings on the barrel, lock, and patch box and some nice scroll engraving on the breech, lock, and patch box as well. It is roughly .47 caliber. It was sold to me as a shootable antique. I was able to get it out to the range once so far, and it does still shoot remarkably well with a .465 caliber ball and thin patch considering its age and worn bore which might need some smoothing out.



I am the Lead Historian and a Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18819
Re: My "New" Krider Rifle
« Reply #1 on: October 20, 2020, 01:19:40 AM »
That’s a real beauty. Thanks for sharing.
Andover, Vermont

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: My "New" Krider Rifle
« Reply #2 on: October 20, 2020, 01:35:22 AM »
 ;) ;)...Well done,.. !! any original rifle in shootin' shape is a bonus,... !!! ... great  looking rifle,.. Congrats,..

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5394
Re: My "New" Krider Rifle
« Reply #3 on: October 20, 2020, 01:56:42 AM »
Great picture of a brush pile, is there a gun in there somewhere?

  Hungry Horse

Offline snapper

  • Hero Member
  • *****
  • Posts: 2360
Re: My "New" Krider Rifle
« Reply #4 on: October 20, 2020, 02:27:36 AM »
Seth

I really like that rifle.   Reminds me of one I used to own just like it!

I used .015 patches with it.

I do hope you like it and enjoy it.

Fleener
My taste are simple:  I am easily satisfied with the best.  Winston Churchill

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 992
    • Black Powder Historian
Re: My "New" Krider Rifle
« Reply #5 on: October 20, 2020, 04:11:28 AM »
Great picture of a brush pile, is there a gun in there somewhere?

  Hungry Horse

Haha yeah hard to do a full shot without a lot of the brush showing. This wasn’t a planned photo shoot just quick snaps while shooting it.

Seth

I really like that rifle.   Reminds me of one I used to own just like it!

I used .015 patches with it.

I do hope you like it and enjoy it.

Fleener

I’ve enjoyed it thoroughly so far. Thanks! I’m using .015 patches currently as well. I need to get a stiff range rod. I purchased a delrin rod not realizing it was going to be as floppy as a wet noodle.
I am the Lead Historian and a Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Re: My "New" Krider Rifle
« Reply #6 on: October 21, 2020, 07:47:09 PM »
Quite a few people up here use those Noodle Rods. I've been able to resist that temptation, though.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline bones92

  • Hero Member
  • *****
  • Posts: 1176
  • If it was easy, everyone would do it.
Re: My "New" Krider Rifle
« Reply #7 on: October 21, 2020, 08:57:05 PM »
Get yourself a good range rod from Rice Barrel, located in NC.  I have  handful of them for various calibers.

At the bottom of the page... http://ricebarrels.com/products.html

If it was easy, everyone would do it.

Offline snapper

  • Hero Member
  • *****
  • Posts: 2360
Re: My "New" Krider Rifle
« Reply #8 on: October 21, 2020, 09:01:37 PM »
I have three of Rice's range rods, and like them very much.

Fleener
My taste are simple:  I am easily satisfied with the best.  Winston Churchill

Offline Oil Derek

  • Sr. Member
  • ****
  • Posts: 287
Re: My "New" Krider Rifle
« Reply #9 on: October 21, 2020, 10:27:40 PM »
Guys, what's the handle like? Any pictures by chance?

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 992
    • Black Powder Historian
Re: My "New" Krider Rifle
« Reply #10 on: October 22, 2020, 12:04:37 AM »
I'll have to check those range rods out. I have a plain steel rod, the wooded ramrod below the barrel that I don't actually intend to use, and two floppy synthetic rods. You'd think they'd warn you that they are super floppy. Its not exactly fun to ram home a tightly patched ball with a rod that bends when you apply pressure. The floppy rods work fine for cleaning, so I will probably just keep them and use them for that purpose.
I am the Lead Historian and a Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline bones92

  • Hero Member
  • *****
  • Posts: 1176
  • If it was easy, everyone would do it.
Re: My "New" Krider Rifle
« Reply #11 on: October 23, 2020, 10:26:00 PM »
Rice has a screw-on black ball handle, made from a high-impact plastic.  I find them very comfortable.
If it was easy, everyone would do it.