« previous next »
Pages: [1]   Go Down

Author Topic: Maker of long smoothbore barrels?  (Read 3012 times)

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19323
Maker of long smoothbore barrels?
« on: November 11, 2020, 05:56:49 AM »
There’s an outfit offering long (46” and longer) smoothbore barrels recently. Not Charles Burton, Ed Rayl, Bobby Hoyt, Rice, and so on. I recall seeing their barrels on a back table at CLA about 2-3 years ago. Ring a bell?
Logged
Andover, Vermont

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18292
  • AKA TimBuckII
Re: Maker of long smoothbore barrels?
« Reply #1 on: November 11, 2020, 01:38:13 PM »
 Was it Dan Fruth?

   Tim
Logged

Offline foxm2015

  • Jr. Member
  • **
  • Posts: 62
Re: Maker of long smoothbore barrels?
« Reply #2 on: November 11, 2020, 03:44:47 PM »
Larry Horrigan, S.W. Michigan, makes long smoothbore barrels.   He has attended the CLA shows in the past.
« Last Edit: November 11, 2020, 03:48:39 PM by foxm2015 »
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19323
Re: Maker of long smoothbore barrels?
« Reply #3 on: November 11, 2020, 03:53:25 PM »
Quote from: foxm2015 on November 11, 2020, 03:44:47 PM
Larry Horrigan, S.W. Michigan, makes long smoothbore barrels.   He has attended the CLA shows in the past.

Bingo, thanks
Logged
Andover, Vermont

Offline foxm2015

  • Jr. Member
  • **
  • Posts: 62
Re: Maker of long smoothbore barrels?
« Reply #4 on: November 11, 2020, 03:58:49 PM »
'Welcome!
Logged

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5294
  • Tennessee
Re: Maker of long smoothbore barrels?
« Reply #5 on: November 11, 2020, 06:53:35 PM »
His info from a 2019 event PDF:

CUSTOM SMOOTH BORES
J & L Horrigan Ent.
Custom turned smooth bore barrels
Larry Horrigan 269-793-3265
                Cell 269-845-0460
 lehorrigan@hotmail.com
Logged
Hold to the Wind

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13413
    • Mike Brooks Gunmaker
Re: Maker of long smoothbore barrels?
« Reply #6 on: November 11, 2020, 07:04:34 PM »
Quote from: foxm2015 on November 11, 2020, 03:44:47 PM
Larry Horrigan, S.W. Michigan, makes long smoothbore barrels.   He has attended the CLA shows in the past.
And these are made of what material?
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19323
Re: Maker of long smoothbore barrels?
« Reply #7 on: November 11, 2020, 07:05:38 PM »
Quote from: Mike Brooks on November 11, 2020, 07:04:34 PM
Quote from: foxm2015 on November 11, 2020, 03:44:47 PM
Larry Horrigan, S.W. Michigan, makes long smoothbore barrels.   He has attended the CLA shows in the past.
And these are made of what material?

That which must not be mentioned.
Logged
Andover, Vermont

Offline Eric Kettenburg

  • Hero Member
  • *****
  • Posts: 4155
    • Eric Kettenburg
Re: Maker of long smoothbore barrels?
« Reply #8 on: November 11, 2020, 07:59:10 PM »
Quote from: rich pierce on November 11, 2020, 07:05:38 PM
That which must not be mentioned.

Puppies and kittens?  :P
Logged
Strange women lying in ponds, distributing swords, is no basis for a system of government!

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4398
  • We all make mistakes.
Re: Maker of long smoothbore barrels?
« Reply #9 on: November 11, 2020, 09:45:19 PM »
  Ken Netting also makes some. IIRC...Oldtravler
Logged

Offline alex e.

  • Hero Member
  • *****
  • Posts: 771
Re: Maker of long smoothbore barrels?
« Reply #10 on: November 11, 2020, 11:08:45 PM »
Larry can make anything up to 60inches. 
He's a friend of mine and a good guy.
Logged
Uva uvam videndo varia fit

Offline Not English

  • Hero Member
  • *****
  • Posts: 594
Re: Maker of long smoothbore barrels?
« Reply #11 on: November 12, 2020, 03:42:02 AM »
I've got a fusil made by John Donelson. He mentioned that the barrel was made by a machinist friend over in Mi. The barrel is 52.5" long, made from DOM steel. It's a good barrel. I can do a 6" group offhand at 60+ yards. If this is the same person as previously mentioned, I can highly recommend him.

Dave
Logged

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 2997
Re: Maker of long smoothbore barrels?
« Reply #12 on: November 12, 2020, 02:40:42 PM »
I have a scaled down punt gun with a "one off" 72" barrel. The maker will remain unknown, but to me, as he doesn't want to do another.
Logged
Mark

Offline conquerordie

  • Hero Member
  • *****
  • Posts: 528
Re: Maker of long smoothbore barrels?
« Reply #13 on: November 12, 2020, 09:33:31 PM »
I have a 55 inch Dan Fruth barrel that shoots great. Nice and light.
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15587
Re: Maker of long smoothbore barrels?
« Reply #14 on: November 13, 2020, 12:53:53 AM »
Quote from: smokinbuck on November 12, 2020, 02:40:42 PM
I have a scaled down punt gun with a "one off" 72" barrel. The maker will remain unknown, but to me, as he doesn't want to do another.

kinda similar to this one?


Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Eric Kettenburg

  • Hero Member
  • *****
  • Posts: 4155
    • Eric Kettenburg
Re: Maker of long smoothbore barrels?
« Reply #15 on: November 13, 2020, 12:55:57 AM »
Kinda similar to .....

Sorry, I was too focused on that spectacular moustache.
Logged
Strange women lying in ponds, distributing swords, is no basis for a system of government!

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2866
Re: Maker of long smoothbore barrels?
« Reply #16 on: November 13, 2020, 01:08:28 AM »
Quote from: Daryl on November 13, 2020, 12:53:53 AM
Quote from: smokinbuck on November 12, 2020, 02:40:42 PM
I have a scaled down punt gun with a "one off" 72" barrel. The maker will remain unknown, but to me, as he doesn't want to do another.

kinda similar to this one?


No, more like this one!

Logged
Stop Marxism in America

Offline Eric Kettenburg

  • Hero Member
  • *****
  • Posts: 4155
    • Eric Kettenburg
Re: Maker of long smoothbore barrels?
« Reply #17 on: November 13, 2020, 02:56:45 AM »
Isn't that the deliverance kid?
Logged
Strange women lying in ponds, distributing swords, is no basis for a system of government!

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2866
Re: Maker of long smoothbore barrels?
« Reply #18 on: November 13, 2020, 03:19:58 AM »
Quote from: Eric Kettenburg on November 13, 2020, 02:56:45 AM
Isn't that the deliverance kid?

Naw. Gun maker buddy of mine from Iowa. Too much cold, windy weather will do funny things to a feller.  ;)
Logged
Stop Marxism in America

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13413
    • Mike Brooks Gunmaker
Re: Maker of long smoothbore barrels?
« Reply #19 on: November 13, 2020, 04:36:50 PM »
Quote from: Eric Kettenburg on November 13, 2020, 12:55:57 AM
Kinda similar to .....

Sorry, I was too focused on that spectacular moustache.
I get the Moustache genetics from my aunt. ;)
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15587
Re: Maker of long smoothbore barrels?
« Reply #20 on: November 13, 2020, 08:47:58 PM »
You guys break me up! ;D ;D ;D ;D ;D ;D ;D
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V
Pages: [1]   Go Up
« previous next »