Author Topic: Fancy Painted Flat Horn  (Read 2813 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Fancy Painted Flat Horn
« on: November 30, 2020, 08:43:02 PM »
  It is about 9" around the outside curve not counting the stopper and 7 tip-to-tip. It is about
2 1/2 X 7/8ths at the base. The base us held in by four iron pins and covered with a Brass plate that is held by the Six Brass tacks. The tip is antler held with three iron pins. Carla did the amazing painting.

  Tim C.











Online Stoner creek

  • Hero Member
  • *****
  • Posts: 2913
Re: Fancy Painted Flat Horn
« Reply #1 on: November 30, 2020, 09:28:02 PM »
MR. CREATIVITY strikes again!
You’ve got a lot of things going on inside your head. Keep em’ coming.....
Stop Marxism in America

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Fancy Painted Flat Horn
« Reply #2 on: November 30, 2020, 09:36:43 PM »
Another great collaboration.  I really like the metal on the butt.  Very cool contrast to the delicate painting by Carla.  I thought she was done painting horns.   ;-)   I guess someone convinced her to do just one more?   Super horn.  God Bless,  Marc

Offline old george

  • Hero Member
  • *****
  • Posts: 710
Re: Fancy Painted Flat Horn
« Reply #3 on: November 30, 2020, 10:39:52 PM »
what a beautiful horn. I like everything about it so does the War Dept. :)

george
I cannot go to Hades: Satan has a restraining order against me. :)

Offline R.J.Bruce

  • Sr. Member
  • ****
  • Posts: 375
Re: Fancy Painted Flat Horn
« Reply #4 on: November 30, 2020, 11:52:18 PM »
Incredible!!@ Just stunning!!

Offline Joey R

  • Hero Member
  • *****
  • Posts: 701
Re: Fancy Painted Flat Horn
« Reply #5 on: December 01, 2020, 12:37:55 AM »
Now if that ain’t a peach!
Joey.....Don’t ever ever ever give up! Winston Churchill

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Fancy Painted Flat Horn
« Reply #6 on: December 01, 2020, 03:52:36 AM »
That is a beautiful horn.   Did you use the little horn I sent you?

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Fancy Painted Flat Horn
« Reply #7 on: December 01, 2020, 04:13:17 AM »
Wow, if that’s not just the cutest thing ever!  That would go great with a bag with some tole painting on the flap...

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Bob McBride

  • Hero Member
  • *****
  • Posts: 2840
  • TENNESSEE
    • Black Powder TV
Re: Fancy Painted Flat Horn
« Reply #8 on: December 01, 2020, 04:37:10 AM »
Very nice. Carla does amazing work. If I could just get Harriette to use hers instead of just admiring it and not letting me touch it for fear I’ll put a smudge on it I’d be in good shape.  ;)

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3004
Re: Fancy Painted Flat Horn
« Reply #9 on: December 01, 2020, 03:07:15 PM »
Tim,
Impeccable work as usual but have to say that Carla put it over the top.
Mark

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Fancy Painted Flat Horn
« Reply #10 on: December 01, 2020, 03:40:54 PM »
 The horn itself is pretty standard, Carla's art work is what makes it stand out. Thanks for the positive comments, I will pass them along.
 Yes Mark that is one of the small horns you sent, really nice horn to start with, makes a Big difference.

  Tim

Offline Robby

  • Hero Member
  • *****
  • Posts: 2655
  • NYSSR ―
Re: Fancy Painted Flat Horn
« Reply #11 on: December 01, 2020, 06:38:30 PM »
That'd go good with a Hawkin.
Robby
« Last Edit: December 04, 2020, 03:12:10 AM by Robby »
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline Tilefish

  • Full Member
  • ***
  • Posts: 176
Re: Fancy Painted Flat Horn
« Reply #12 on: December 01, 2020, 07:40:46 PM »
  It is about 9" around the outside curve not counting the stopper and 7 tip-to-tip. It is about
2 1/2 X 7/8ths at the base. The base us held in by four iron pins and covered with a Brass plate that is held by the Six Brass tacks. The tip is antler held with three iron pins. Carla did the amazing painting.

  Tim C.











 Thank you again Tim it turned out amazing. My daughter is going to love it. Please tell Carla thank you. The painting is beautiful.
« Last Edit: December 01, 2020, 11:05:01 PM by Tim Crosby »
Chad

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Fancy Painted Flat Horn
« Reply #13 on: December 02, 2020, 11:32:18 AM »
You’ve both done a beautiful job on that piece, Tom.
Bob
South Carolina Lowcountry

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Fancy Painted Flat Horn
« Reply #14 on: December 02, 2020, 04:41:48 PM »
 It's funny how Pix show things, if you look closely where the tip meets the body there are some dark spots. Not sure what caused them but I didn't notice them until I looked at the pix again. A little paint and they're gone.

  Tim

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Fancy Painted Flat Horn
« Reply #15 on: December 02, 2020, 09:28:19 PM »
I always see things in photos that I don't see with the naked eye in normal light.   My good photos with flash seem to always show all the flaws in my work that you would never see in normal light.  Even sunlight doesn't show everything.  My customers always get a product that looks better than the photos and I have to think that is a good thing. 

By the way, those are nice, well lit, photos.   I assume you don't have a professional flash setup.   How do you do it?

Offline Mike from OK

  • Hero Member
  • *****
  • Posts: 1084
Re: Fancy Painted Flat Horn
« Reply #16 on: December 03, 2020, 07:30:39 AM »
Beautiful work as always Tim. And my compliments to Carla on the beautiful paint job.

Mike

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Fancy Painted Flat Horn
« Reply #17 on: December 03, 2020, 08:25:18 PM »

By the way, those are nice, well lit, photos.   I assume you don't have a professional flash setup.   How do you do it?

 A complement like that coming from a professional photographer is good to hear. Actually I subscribe to the Bill Shipman school of photography, over cast day and a digital camera. The cameras are not much, a Cannon PowerShot A2300 HD and an older Cannon PowerShot A620. I use an editor for cropping and positioning but other than that they're pretty much how they come off the camera. Sometimes it takes 8 or 10 shots to get 3 or 4 good ones,

  Tim

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Fancy Painted Flat Horn
« Reply #18 on: December 04, 2020, 12:04:00 AM »

By the way, those are nice, well lit, photos.   I assume you don't have a professional flash setup.   How do you do it?

 A complement like that coming from a professional photographer is good to hear. Actually I subscribe to the Bill Shipman school of photography, over cast day and a digital camera. The cameras are not much, a Cannon PowerShot A2300 HD and an older Cannon PowerShot A620. I use an editor for cropping and positioning but other than that they're pretty much how they come off the camera. Sometimes it takes 8 or 10 shots to get 3 or 4 good ones,

  Tim

I figured that must be what you did.    As to a camera,  I use my iPhone most of the time.    Lighting is more important than the camera.
   

Offline Robert Hill

  • Full Member
  • ***
  • Posts: 217
Re: Fancy Painted Flat Horn
« Reply #19 on: December 04, 2020, 02:04:02 AM »
I like the base of that horn it’s an interesting idea that turned out well.
-Robert

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Fancy Painted Flat Horn
« Reply #20 on: December 04, 2020, 02:49:36 AM »
Tim, that horn needs a special stand to display it.  Like a plate holder. 

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Fancy Painted Flat Horn
« Reply #21 on: December 04, 2020, 03:55:14 AM »
Tim, that horn needs a special stand to display it.  Like a plate holder.

This is where I get my display stands for horns.  You bend the arms to fit.

https://www.artdisplay.com/h-armature.html


Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Fancy Painted Flat Horn
« Reply #22 on: December 04, 2020, 01:38:29 PM »
Tim, that horn needs a special stand to display it.  Like a plate holder.

This is where I get my display stands for horns.  You bend the arms to fit.

https://www.artdisplay.com/h-armature.html

 Thanks, Mark, somebody here was looking for stands like that, I didn't know they were available.
Can't remember who it was hopefully they will see this post.

  Tim

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Fancy Painted Flat Horn
« Reply #23 on: December 04, 2020, 01:39:57 PM »
Tim, that horn needs a special stand to display it.  Like a plate holder.

 Good idea Marc but it's going to a new home and I think it is going to be used.

   Tim

Offline aaronc

  • Hero Member
  • *****
  • Posts: 793
Re: Fancy Painted Flat Horn
« Reply #24 on: December 19, 2020, 03:12:30 PM »
Fancy indeed,...great work by both of you.
- Aaron C
At the work bench.