Author Topic: Jacob Hoak Information  (Read 3304 times)

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Jacob Hoak Information
« on: December 31, 2020, 02:40:46 AM »
      I am looking for some more information on Jacob Hoak. I have one of his rifles and I know of the walnut one listed in Thoughts on the Kentucky Rifle of the Golden age. Mine is the one pictured in Kauffman's book. I have only seen one other one besides those two. Does anyone have more information on Jacob Hoak or know of other examples of his work where there may be photos available? Any information would be greatly appreciated.
Thank you
John
The difficult we do at once, the impossible takes a little longer.

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 484
Re: Jacob Hoak Information
« Reply #1 on: December 31, 2020, 03:48:43 AM »
Greetings,

There is a Jacob Hoak gun in "The Lancaster County Long Rifle" by Patrick Hornberger & John Kolar.  It's on pages 58 & 59.

Kevin,

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jacob Hoak Information
« Reply #2 on: December 31, 2020, 04:22:11 AM »
Greetings,

There is a Jacob Hoak gun in "The Lancaster County Long Rifle" by Patrick Hornberger & John Kolar.  It's on pages 58 & 59.

Kevin,

   Thank you Kevin. I will look it up.  I am picking up a copy of that book from a friend of mine sometime this weekend as I don't have that one.
The difficult we do at once, the impossible takes a little longer.

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4351
Re: Jacob Hoak Information
« Reply #3 on: December 31, 2020, 05:29:54 AM »
Hey utseabee, Maybe you could post that rifle up here for us to see? Not many of his guns around and it would be a real treat to see!
John
John Robbins

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jacob Hoak Information
« Reply #4 on: December 31, 2020, 05:33:17 AM »
Hey utseabee, Maybe you could post that rifle up here for us to see? Not many of his guns around and it would be a real treat to see!
John















I need to do a better job of taking pics, but this is all I have right now. I am going to take a shot at building one and also have one built by a real gun builder. It seems to take me years to finish a project.
« Last Edit: December 31, 2020, 05:44:48 AM by utseabee »
The difficult we do at once, the impossible takes a little longer.

Offline WESTbury

  • Hero Member
  • *****
  • Posts: 1548
  • Marble Mountain central I Corps May 1969
Re: Jacob Hoak Information
« Reply #5 on: December 31, 2020, 06:13:35 AM »
Great rifle, you are fortunate.

Jim Whisker's Gunsmiths of Lancaster County pages 122-125, has three different Hoak rifles.
"We are not about to send American Boys 9 to 10 thousand miles away from home to do what Asian Boys ought to be doing for themselves."
President Lyndon B. Johnson October 21, 1964

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Jacob Hoak Information
« Reply #6 on: December 31, 2020, 07:11:09 AM »
There is nicely carved Jacob Hoak rifle in Masterpieces of the American Longrifle, The Joe Kindig, Jr. Collection.
Andover, Vermont

Offline mr. no gold

  • member 2
  • Hero Member
  • ****
  • Posts: 2654
Re: Jacob Hoak Information
« Reply #7 on: December 31, 2020, 08:39:47 AM »
Jacob Hoake was an early Lancaster rifle and lock maker who worked during the Rev. War. I too have one of his rifles which has incised carving. Hoake lived a long time and may have worked up to his last years. I have seen and handled no more than six of his pieces with only three being carved. On that basis we can assume that his work is rare. It may be the the majority of his work was devoted to lock making. Whisker has some good information on Hoake in his 'Lancaster' book. As I recall he worked primarily in Strasburg. Nice find and it is greatly appreciated that you brought it in to be seen.
Dick

Offline Curt Lyles

  • Curt’s Blacksmith Shop
  • Sr. Member
  • ****
  • Posts: 424
    • Curt's Blacksmith Shop
Re: Jacob Hoak Information
« Reply #8 on: December 31, 2020, 02:35:38 PM »
John there is also a Jacob Houck Fowler in two of Madison Grant's books on pouches horns and knives I'm not sure which one. Curt

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 484
Re: Jacob Hoak Information
« Reply #9 on: December 31, 2020, 03:17:24 PM »
Hello Again,

There is a Jacob Hoak fowler on page 214 of "Flintlock Fowlers" by Tom Grinslade.

Kevin

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jacob Hoak Information
« Reply #10 on: December 31, 2020, 03:27:59 PM »
Thank you for all of the information. It looks like I will be adding to my book collection too.   :D
The difficult we do at once, the impossible takes a little longer.

Offline ptk1126

  • Sr. Member
  • ****
  • Posts: 361
Re: Jacob Hoak Information
« Reply #11 on: December 31, 2020, 03:31:06 PM »
There are pix of two Hoak rifles in Behold the Longrifle by by Chandler and Whisker, and a carved example in Behold the Longrifle Again by Whisker.

Kentucky Rifle Patchboxes Vol. 2 by Chandler & Whisker has pix of 3 patchboxes.

Kindig's Thoughts on the Ky Rifle has some info and pix of one rifle, and the Pennsylvania-
Kentucky Rifle by Kauffman has one.

Finally, the Frazier Museum in Louisville Ky has (had ?) a Hoak on display. Sorry for the quality of the pix, taken of a display case.














All the best
Paul

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 484
Re: Jacob Hoak Information
« Reply #12 on: December 31, 2020, 03:33:10 PM »
John there is also a Jacob Houck Fowler in two of Madison Grant's books on pouches horns and knives I'm not sure which one. Curt

In "Powder Horns and their Architecture" there is one full-length image of a Hoak fowler on page 135.  Mr. Grant shares a story about his purchase of it and hunting with it.

Kevin

Offline WESTbury

  • Hero Member
  • *****
  • Posts: 1548
  • Marble Mountain central I Corps May 1969
Re: Jacob Hoak Information
« Reply #13 on: December 31, 2020, 04:20:57 PM »
Oh yea, there is a guy on the ALR by the name of UTSEABE who has some photos of a nice Jacob Hoak rifle. ;D
"We are not about to send American Boys 9 to 10 thousand miles away from home to do what Asian Boys ought to be doing for themselves."
President Lyndon B. Johnson October 21, 1964

Offline homerifle

  • Sr. Member
  • ****
  • Posts: 264
Re: Jacob Hoak Information
« Reply #14 on: December 31, 2020, 05:29:43 PM »
Thanks for posting pictures. Nice piece!

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4351
Re: Jacob Hoak Information
« Reply #15 on: December 31, 2020, 07:20:03 PM »
I agree, that's a fine rifle!
Thanks for posting the pictures!
John
John Robbins

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jacob Hoak Information
« Reply #16 on: December 31, 2020, 10:43:37 PM »
Oh yea, there is a guy on the ALR by the name of UTSEABE who has some photos of a nice Jacob Hoak rifle. ;D

Thanks for all of the information and comments
The difficult we do at once, the impossible takes a little longer.

Online Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Jacob Hoak Information
« Reply #17 on: January 01, 2021, 09:44:45 AM »
Thanks for posting pictures. Nice piece!

+2!


Curtis
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline bama

  • Hero Member
  • *****
  • Posts: 2174
    • Calvary Longrifles
Re: Jacob Hoak Information
« Reply #18 on: January 03, 2021, 10:44:12 PM »
John is bringing his Hoak to my March rifle building class and I can hardly wait to roll it around for a first hand look. It is a fabulous rifle.

Jim Parker

"An Honest Man is worth his weight in Gold"

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Jacob Hoak Information
« Reply #19 on: January 04, 2021, 12:52:41 AM »
John is bringing his Hoak to my March rifle building class and I can hardly wait to roll it around for a first hand look. It is a fabulous rifle.
Jim,

   I am looking forward to the class. I just got euthanized on Wednesday ;) (COVID vaccine) and should be good to go.
The difficult we do at once, the impossible takes a little longer.