Author Topic: Lets see your rifles! (Read 26358 times)

rsherman · « **Reply #25 on:** February 20, 2021, 04:05:22 PM »

Quote from: jim alford on February 19, 2021, 06:09:14 AM

rsherman, I would certainly appreciate some additional photos of the two rifles previously posted. Interesting pieces.
Thanks, JIM .45 cal, 42" straight 15/16", Actually broken wrist. Nice rippely scraped red maple stock.

rsherman · « **Reply #26 on:** February 20, 2021, 04:10:58 PM »

.45 cal 42" straight 15/16". Nice rippely, scraped red maple
Stock, with genuine broken wrist . lol

Sequatchie Rifle · « **Reply #27 on:** February 20, 2021, 04:15:44 PM »

Quote from: louieparker on February 19, 2021, 07:31:31 PM

This is a bench copy of an iron mounted rifle..Not sure where the original was made, But I thought it was a cool rifle.. The original is in Jim Gordon's museum,, I had it about four months to make the copy. About nine years ago. LP

Perfection!

smart dog · « **Reply #28 on:** February 20, 2021, 06:15:05 PM »

Hi,
Here is my current favorite and my previous favorite. Both 62 caliber.

dave

donal_h · « **Reply #29 on:** February 20, 2021, 07:02:24 PM »

Smart dog, I love the checkering on your previous favorite. Actually, let me amend that, I love everything about that rifle.

smart dog · « **Reply #30 on:** February 21, 2021, 03:34:35 PM »

Hi Donal,
Thanks. I really like that rifle too and the bonus is the barrel has a slight choke or taper to the bore. I did not realize that until I put ball and patch down it. I bought it from Chris Laubach and I don't know if he ordered the taper or what? It is just a Colerain D weight Griffin rifled barrel. I've never knowingly owned a rifled barrel with a tapered bore and I've never owned a barrel for which developing a good load was easier. It is the most forgiving barrel I've ever used and it is very accurate. I use a 0.595 ball with 0.018" patches, which loads nice and easy and with 85 grains of powder will shoot 1.5" groups at 50 yards. However, powder charges ranging as low as 75 grains and as high as 95 made no difference at that range so I selected 85 because it was right in the middle. The lock is one I built up from TRS parts. It is a copy of a lock by John Twigg. I am not sure it is a particularly fast lock but it always ignites the primer. I've shot the rifle quite a bit now and have not had a single misfire or hang fire even with very worn flints and fouling build up. On our last wood walk in 2020, I shot the head off a bowling pin at 120 yards with it. I really like the rifle a lot.

dave

skullcap · « **Reply #31 on:** February 21, 2021, 08:33:54 PM »

58 colonial for knocking out north Missouri whitetail

Magungo1066 · « **Reply #32 on:** February 21, 2021, 09:13:54 PM »

Quote from: skullcap on February 21, 2021, 08:33:54 PM

58 colonial for knocking out north Missouri whitetail

That is a gorgeous rifle

oldtravler61 · « **Reply #33 on:** February 22, 2021, 01:12:55 AM »

Skullcap that is one beautiful gun !!

skullcap · « **Reply #34 on:** February 22, 2021, 01:28:56 AM »

Thank you guys I am very pleased with it in every way. I’ve owned a lot of flint guns. This is my fav it has magic in it when it shoots also

skullcap · « **Reply #35 on:** February 22, 2021, 01:38:33 AM »

The other side. A little more detail

website images

wattlebuster · « **Reply #36 on:** February 24, 2021, 01:22:11 AM »

Top is a 62 cal woodsrunner built by Joe Schell. The bottom is a 62 cal built by Don Bruton

This is a 40 cal by Mike Brooks

Here is a 40 cal woodsrunner built by Joe Schell

Here is a 40 cal built by Don Bruton an I finished the wood an metal

skullcap · « **Reply #37 on:** February 24, 2021, 02:41:40 AM »

Wattlebuster. All 3 nice guns. The brooks gun is definitely my kind

Timberdog · « **Reply #38 on:** February 25, 2021, 05:05:38 AM »

Cades Cove Fidler...I do have a mind on swooning that long-legged lady away from you...I’m working on my beard and on getting me some bottom land! Sadly, the beard and the bottom land is gonna take a while...But I’ve held her and I got my mind on hold’n her tight again! 😂🤣😂

Offline Cades Cove Fiddler
Hero Member
*****

Posts: 1264
View Profile Email Personal Message (Offline)

Re: Lets see your rifles!
« Reply #3 on: February 18, 2021, 05:48:37 PM »
Quote

... I do not hunt anymore,... don't need to,... I just make holes in paper targets every now & then,.. I use this Soddy style Tennessee rifle,.. gun's name is "Old Mike" and it does good,... Happy Shootin' boys,...!!! .... regards, ... Cades ::)Cove Fiddler,...

mathematical symbol for average

oldtravler61 · « **Reply #39 on:** February 25, 2021, 03:56:17 PM »

You just might have some
competition.. On that plan of yours...lol By the way that their rifle your holding is right nice
too... Any info on it...?

Cades Cove Fiddler · « **Reply #40 on:** February 25, 2021, 06:45:39 PM »

... Timberdog,.... as I recall, you shouldered and aimed her too,... !!!! ... takes quite a feller to do that,...!!!,.... and Mike (Oldtraveller) ... the rifle is "Old Mike",... you remember her well,... Timberdog was quite taken with her fine Soddy Tennessee lines and sheer beauty at the Alabama show,....

hanshi · « **Reply #41 on:** February 25, 2021, 11:15:06 PM »

Quote from: Stoner creek on February 18, 2021, 07:58:49 PM

Here’s a few.

hanshi · « **Reply #42 on:** February 25, 2021, 11:35:55 PM »

As plain as day old bread but .36 X 38" X 3/4" X 6 lbs 4 oz. Gets fired a lot and stacks ball.

t.caster · « **Reply #43 on:** February 26, 2021, 05:04:46 PM »

My main shooter is this JP Beck with .54 cal X 42" C wt. Getz barrel, Deluxe Siler flint and single set trigger. Built in 2003.

photo upload sites

Mike Brooks · « **Reply #44 on:** February 26, 2021, 08:27:48 PM »

Nifty Beck

D. Taylor Sapergia · « **Reply #45 on:** February 26, 2021, 08:32:30 PM »

I agree Mike. The architecture is spot on. Nice job Tom.

David R. Pennington · « **Reply #46 on:** February 27, 2021, 04:13:02 AM »

Cades Cove, mine’s not grown up yet, only 48” barrel. I had someone ask me seriously how I loaded it seeing it’s so tall. I told them I just keep walking till I find a stump to climb up on.

Cades Cove Fiddler · « **Reply #47 on:** February 27, 2021, 06:14:17 AM »

... David,... 48" will do in a pinch,... I have an original LAWING that is only 47",.. HaHa,... now,... old straight chairs are another weakness of mine,... did you put the new seat in this one,...? great rifle,.... and chair,...regards,... CCF

recurve · « **Reply #48 on:** February 27, 2021, 04:52:21 PM »

Got a New to me

from Cabin Creek Brad Emig his "Yorktown rifle" 7 pounds of fun

large siler davis triggers (all tuned by Brad) custom barrel rifled by Bobby Hoyt .50 1-56 round bottum

and it shoots as good as it looks 4 shots at 50 yrds 60 grns swiss 3f .490 ball .020 pt tallow lube

Daryl · « **Reply #49 on:** February 27, 2021, 10:10:59 PM »

Nice rifle, recurve. I see the crown is machine cut only.

News:

Author Topic: Lets see your rifles! (Read 26358 times)

donal_h