« previous next »
Pages: [1]   Go Down

Author Topic: lock care and use  (Read 3529 times)

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4477
    • Personal Website
lock care and use
« on: March 22, 2021, 06:01:56 PM »
This is just a reminder to everyone and information for the newbies.  NEVER trip a lock without a flint or piece of wood in the jaw and the frizzen closed!!!  We have a lot of customers who are new to flintlocks and this has been a big problem as of late.  If you do this you will likely bend the top jaw screw.

Thanks,
Jim
Logged

Offline Jeff Durnell

  • Full Member
  • ***
  • Posts: 202
Re: lock care and use
« Reply #1 on: March 22, 2021, 06:44:57 PM »
Thanks for the heads up, Jim. I'm new to building but not to flintlocks. I always knew not to do it, but I didn't know that bending the top jaw screw would be the result. I'm glad I found out this way  :)
Logged

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: lock care and use
« Reply #2 on: March 22, 2021, 07:43:15 PM »
I like to keep a cut chunk of one of this style pencil eraser in the jaws while building.  It will also keep one from accidently tripping a lock on ones hand or at least that's what my friend said.   ;D



Logged
Failure only comes when you stop trying.

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2916
Re: lock care and use
« Reply #3 on: March 22, 2021, 08:32:41 PM »
I’ve done several guns in the past for chaireties, raffles, etc.. I don’t put a flint in the jaws for many reasons. I always put a flint shaped piece of wood painted black in the jaws. Anyway, some lucky winner got his gun home and shortly thereafter complained to my charity because his lock “just wouldn’t spark”. Go figure.....
Logged
Stop Marxism in America

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: lock care and use
« Reply #4 on: March 22, 2021, 10:27:50 PM »
 ;D
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline flinchrocket

  • Hero Member
  • *****
  • Posts: 1750
Re: lock care and use
« Reply #5 on: March 22, 2021, 10:38:43 PM »
That shows what your up against. :o
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9693
Re: lock care and use
« Reply #6 on: March 22, 2021, 10:51:14 PM »
Quote from: flinchrocket on March 22, 2021, 10:38:43 PM
That shows what your up against. :o

Yep,
The cock stops dead and the top jaw screw keeps on moving.
No spark with wood flint?Geeogollywhiz!!Hooodathunkit on a
fine lock?
Bob Roller
Logged

Offline Blackthorn

  • Starting Member
  • *
  • Posts: 20
Re: lock care and use
« Reply #7 on: March 22, 2021, 11:21:08 PM »
Well that explains my bent screw.  Tried not to set off the lock when I was working on the trigger.  Did it once and didn’t think anything of it. When I was inserting the flint I noticed it was twisting a bit.  It still holds the flint tightly so I guess I’m good. ???  My frizzen was open.

Question for Jim.  Can I buy another screw just in case I have an issue?
« Last Edit: March 23, 2021, 12:02:16 AM by Blackthorn »
Logged

Offline Nazgul

  • Full Member
  • ***
  • Posts: 191
Re: lock care and use
« Reply #8 on: March 22, 2021, 11:34:29 PM »
I put wood pieces in all my flintlocks because I got tired of cutting myself while cleaning. Besides my wife laughs at me when she bandages me up.......

Don
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9693
Re: lock care and use
« Reply #9 on: March 22, 2021, 11:55:20 PM »
Quote from: Stoner creek on March 22, 2021, 08:32:41 PM
I’ve done several guns in the past for chaireties, raffles, etc.. I don’t put a flint in the jaws for many reasons. I always put a flint shaped piece of wood painted black in the jaws. Anyway, some lucky winner got his gun home and shortly thereafter complained to my charity because his lock “just wouldn’t spark”. Go figure.....

Stoner,
You HAVE to use a slower drying paint for that job ;D.
Bob Roller
Logged

Offline Hank*in*WV

  • Sr. Member
  • ****
  • Posts: 398
Re: lock care and use
« Reply #10 on: March 23, 2021, 01:15:52 AM »
Quote from: Ken G on March 22, 2021, 07:43:15 PM
I like to keep a cut chunk of one of this style pencil eraser in the jaws while building.  It will also keep one from accidently tripping a lock on ones hand or at least that's what my friend said.   ;D





Bevel up or down?
Logged
"Much of the social history of the western world over the past three decades has involved replacing what worked with what sounded good. . ." Thomas Sowell

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: lock care and use
« Reply #11 on: March 23, 2021, 02:01:42 AM »
Quote
Bevel up or down?

Bevel up for a late Ketland.  ;)


« Last Edit: March 24, 2021, 03:47:42 PM by Dennis Glazener »
Logged
Failure only comes when you stop trying.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15848
Re: lock care and use
« Reply #12 on: March 23, 2021, 02:51:44 AM »
OBVIOUSLY ;)
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: lock care and use
« Reply #13 on: March 23, 2021, 03:58:53 AM »
But pot don't hurt nobody.
Logged
Nobody is always correct, Not even me.

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: lock care and use
« Reply #14 on: March 23, 2021, 04:28:21 AM »
No spark? Yep, seen it right off !!!  Pilgrims !!! lol Dave :-* :-*
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3707
Re: lock care and use
« Reply #15 on: March 23, 2021, 10:30:22 PM »
Wayne, you have to use HARD wood for those black painted flints you are using brother!  😉
Logged

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: lock care and use
« Reply #16 on: March 23, 2021, 11:04:34 PM »
Quote from: Ken G on March 23, 2021, 02:01:42 AM
Bevel up or down?

Bevel up for a late Ketland.  ;)


[/quote]

 Yea but....
Logged

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2916
Re: lock care and use
« Reply #17 on: March 23, 2021, 11:06:49 PM »
I don’t want some unknowing doo-fuss clatching a sharp 5/8” inch flint into his/her hand. Believe it or not I have seen that happen. Lock clatchers and muzzle fingereres drive me plumb batty. Especially when they do it as if they have a right to OR acting as “experts”. 
Logged
Stop Marxism in America

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4477
    • Personal Website
Re: lock care and use
« Reply #18 on: March 24, 2021, 03:22:45 PM »
Quote from: Blackthorn on March 22, 2021, 11:21:08 PM
Well that explains my bent screw.  Tried not to set off the lock when I was working on the trigger.  Did it once and didn’t think anything of it. When I was inserting the flint I noticed it was twisting a bit.  It still holds the flint tightly so I guess I’m good. ???  My frizzen was open.

Question for Jim.  Can I buy another screw just in case I have an issue?

No problem at all.  Just give us a call.  No charge.

Thanks,
Jim
Logged

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: lock care and use
« Reply #19 on: March 24, 2021, 03:31:30 PM »
Quote from: Stoner creek on March 23, 2021, 11:06:49 PM
and muzzle fingereres drive me plumb batty. Especially when they do it as if they have a right to OR acting as “experts”.

 I never have understood that, I have thought about putting a coating on India Ink just inside the muzzle as kind of a prize. A little trap, like one of those Chinees finger traps or pin would work too.

  Tim
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19546
Re: lock care and use
« Reply #20 on: March 24, 2021, 05:18:47 PM »
Lipstick in the muzzle would be a socially acceptable prank. I hear they even have black lipstick. Just to be clear, it’s not my color.
Logged
Andover, Vermont

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2916
Re: lock care and use
« Reply #21 on: March 24, 2021, 05:20:53 PM »
Quote from: rich pierce on March 24, 2021, 05:18:47 PM
Lipstick in the muzzle would be a socially acceptable prank. I hear they even have black lipstick. Just to be clear, it’s not my color.
I’ve got a show coming up in April. May have to give that a try!
Logged
Stop Marxism in America
Pages: [1]   Go Up
« previous next »