« previous next »
Pages: [1]   Go Down

Author Topic: Re-bore .40 to .45  (Read 1933 times)

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re-bore .40 to .45
« on: April 06, 2021, 08:12:56 PM »
For nearly 20 years I've had a nice flintlock longrifle in .40 but haven't used it as much as I'd like.  It's accurate but doesn't fill an actual niche .  The 38" "B" wgt GM barrel sustained some bore damage several years ago resulting in pitting.  I know I'd shoot it more if it were a .45; It is delightful to handle.

I've read great things about Bobby Hoyt though I'm sure there are others.  I'm looking for any recommendations/opinions on the re-bore to .45.  Any "ball park" idea of the kind of cost I'm looking at?
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Daniel Coats

  • Hero Member
  • *****
  • Posts: 1401
Re: Re-bore .40 to .45
« Reply #1 on: April 06, 2021, 08:25:12 PM »
I would be more inclined to rebarrel it. That way you could always go back to the way it was if desired.
Logged
Dan

"Ain't no nipples on a man's rifle"

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19523
Re: Re-bore .40 to .45
« Reply #2 on: April 06, 2021, 08:45:05 PM »
I’m guessing with 2-way shipping you’re looking at maybe $175 to get it re-bored. That’s cheaper than a new swamped barrel, plus the work and barrel fixings. I’ve got a gun with 3 barrels. Mostly use just one of them. 
Logged
Andover, Vermont

Offline Dave Marsh

  • Hero Member
  • *****
  • Posts: 828
Re: Re-bore .40 to .45
« Reply #3 on: April 06, 2021, 08:46:44 PM »
Bobby Hoyt is the guy to have do it.  I have had him do several.  Been a few years but will be around $150 plus or minus including shipping.  I really stating prices so you really need to talk to him.  Good luck. 

Dave 
Logged
"Those who give up freedom for security deserve neither freedom nor security."
~ Benjamin Franklin

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Re-bore .40 to .45
« Reply #4 on: April 06, 2021, 09:18:14 PM »
If that GM barrel hase their longer breech plug a barrel from another maker might not let your vent  line up the same
« Last Edit: April 07, 2021, 12:08:59 AM by smylee grouch »
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Re-bore .40 to .45
« Reply #5 on: April 06, 2021, 09:49:29 PM »
Thanks all for the information.  If I can manage to scrape a little $$ together I'll go for a re-bore.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: Re-bore .40 to .45
« Reply #6 on: April 06, 2021, 11:44:44 PM »
Hanshi,
Bobby is the best.  I’ve had 3 barrels bored, and 2 of them re rifled from him. Excellent work,  very reasonably priced. The smooth bore was $60, the re bored and rifled $120. Plus shipping of course.
Logged
In His grip,

Dane

Offline utseabee

  • Sr. Member
  • ****
  • Posts: 345
Re: Re-bore .40 to .45
« Reply #7 on: April 07, 2021, 12:53:46 AM »
    I have one barrel that Bobby re-bored for me and I didn't even need to file the sights. I have seen a few others that kept the same point of impact after the re-bore. I highly recommend Bobby Hoyt, you will not be sorry if you choose that course of action.
Logged
The difficult we do at once, the impossible takes a little longer.

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Re-bore .40 to .45
« Reply #8 on: April 08, 2021, 11:52:09 PM »
I called Bob Hoyt and left a message.  If I don't hear from him by tomorrow I try again.  Already removed the barrel for shipping.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline flintlock hunter

  • Jr. Member
  • **
  • Posts: 68
Re: Re-bore .40 to .45
« Reply #9 on: April 09, 2021, 01:01:20 AM »
Quote from: utseabee on April 07, 2021, 12:53:46 AM
    I have one barrel that Bobby re-bored for me and I didn't even need to file the sights. I have seen a few others that kept the same point of impact after the re-bore. I highly recommend Bobby Hoyt, you will not be sorry if you choose that course of action.
I second this one, Bobby has done a few rebores and liners for me. The last one he rebored for me was a colerain 40 cal. to a 50 cal and the sights needed no adjustments at all!! And a great guy to deal with.
Logged
Barry

Offline Joe Stein

  • Sr. Member
  • ****
  • Posts: 443
Re: Re-bore .40 to .45
« Reply #10 on: April 09, 2021, 04:50:47 AM »
Bobby Hoyt is on this forum. Search for R.A. Hoyt. He might answer a P.M.
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Re-bore .40 to .45
« Reply #11 on: April 10, 2021, 12:07:13 AM »
Well, I've got the barrel about ready to ship to Bobby Hoyt.  Any suggestions on the least expensive and most reasonable way to ship?  His prices are very reasonable; and even with shipping it's around half what a new barrel alone would cost.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline scottmc

  • Hero Member
  • *****
  • Posts: 591
Re: Re-bore .40 to .45
« Reply #12 on: April 10, 2021, 12:48:08 AM »
I always deliver and pick mine up being in PA but I assure you, you cant go wrong with his re-rifling.  He's done several for me and friends and they all shoot to the same point of impact as they were before he re-rifled.  Good guy to boot!
Logged
Remember Paoli!

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Re-bore .40 to .45
« Reply #13 on: April 10, 2021, 01:16:13 AM »
I spoke with him in a phone conversation and he is, indeed, a nice guy.  Shipping> UPS/FedEx/USPS/etc??
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Top Jaw

  • Hero Member
  • *****
  • Posts: 575
Re: Re-bore .40 to .45
« Reply #14 on: April 10, 2021, 02:39:22 PM »
Remove breech and send in a beefy cardboard tube.  Is about $20 to ship.   If you can’t find one similar at UPS, online, (etc), Bobby may be able to send you an empty tube, as I’m sure he uses them. 



Logged

Offline FALout

  • Hero Member
  • *****
  • Posts: 875
Re: Re-bore .40 to .45
« Reply #15 on: April 10, 2021, 03:06:28 PM »
I’ve used pvc pipe with one cap glued on and the other end taped up, weighs a little more but never had a barrel damaged that way, stuff with paper or foam.
Logged
Bob

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2393
Re: Re-bore .40 to .45
« Reply #16 on: April 10, 2021, 09:15:37 PM »
I have three Numrich NOS 45 cal barrels.  Each has a ring from leaving a patch in the bore.  They could be re rifled to 50 cal.  Since they are only 32" I'd do a couple as fast twist pistol barrels. 

How much does Mr. Hoyt normally charge to ream and rifle a barrel?   
Logged

Offline wolf

  • Full Member
  • ***
  • Posts: 218
Re: Re-bore .40 to .45
« Reply #17 on: April 10, 2021, 11:04:30 PM »
Bobby cleaned up a barrel for me. he is a good man,,,,,,,,,,,,
Logged
I have never "harvested" a critter but I have killed quite a few,,,,,,,,,,,

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Re-bore .40 to .45
« Reply #18 on: April 11, 2021, 12:15:15 AM »
I already have it in a heavy cardboard tube that something had been shipped in long ago.  Didn't even think about removing the breech plug, I'll take the barrel out and do that tomorrow.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.
Pages: [1]   Go Up
« previous next »