Author Topic: Finished New England horn  (Read 2871 times)

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Finished New England horn
« on: April 23, 2021, 02:10:55 AM »
This one has features of an original horn in my collection and a paneled to round, scalloped transition original I didn’t get at an auction. Both horns are considered to be of New England origin.  This one probably holds just short of a pound of powder. 15” along the curve and 3” wide at the butt plug.














The “story” on the faces in the letters is that this soldier started out marching happily on two legs. By the end of the war, one leg and a more stern outlook.
Andover, Vermont

Eseabee1

  • Guest
Re: Finished New England horn
« Reply #1 on: April 23, 2021, 03:41:50 AM »
That is a very nice looking horn. 

Offline Nordnecker

  • Hero Member
  • *****
  • Posts: 1216
Re: Finished New England horn
« Reply #2 on: April 23, 2021, 02:11:01 PM »
I like it. Many years from now, someone will wonder about the expressions on those faces.
"I can no longer stand back and allow communist infiltration, communist indoctrination and the international communist conspiracy to sap and impurify our precious bodily fluids."- Gen Jack T. Ripper

Offline Dwshotwell

  • Sr. Member
  • ****
  • Posts: 267
Re: Finished New England horn
« Reply #3 on: April 23, 2021, 02:24:47 PM »
Very cool. Was the scrimshaw (initials with faces, arrows, etc.) inspired by the originals as well as the shape / style?
David Shotwell

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18054
  • AKA TimBuckII
Re: Finished New England horn
« Reply #4 on: April 23, 2021, 03:04:07 PM »
 Nice job Rich, I like how the panels go into the scallops. The carving reminds me of the faces on playing cards.

  Tim

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #5 on: April 23, 2021, 03:44:53 PM »
Very cool. Was the scrimshaw (initials with faces, arrows, etc.) inspired by the originals as well as the shape / style?

I confess that I do a lot of work in the moment. I just get after it like some guy in the field who thinks it’s time to put his initials on his horn.

Some horns were fully scrimmed, by plan, often by a professional. Others seem more willy nilly, scrimmed all over but without a design plan or professional execution. Some have initials on them and not much else. These are purported to be horns used by militia. One person from a mess or under one sergeant would take all horns to be re-filled. The initials removed confusion and prevented someone taking a better looking horn as their own when horns were returned. These were done by the owner, in a less professional manner.  This “fella” likely saw some professionally decorated horns and thought to do a little more than the simplest initials. But, done at an idle time, in the lap, with a pocketknife. Facial expressions likely added later. This will be one of my personal horns and so may get later additions.
This horn is based on this original and another.




Andover, Vermont

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: Finished New England horn
« Reply #6 on: April 23, 2021, 03:57:24 PM »
Nice horn.  I like the scalloped transition.  Looks great.

Ken
Failure only comes when you stop trying.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #7 on: April 23, 2021, 05:57:41 PM »
I think Paul Bigham hinted to me that it could use some aging. Might stick it in a pot of murky water. What say ye?
Andover, Vermont

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18054
  • AKA TimBuckII
Re: Finished New England horn
« Reply #8 on: April 23, 2021, 06:16:12 PM »
 Maybe a bath in some strong instant coffee. TC

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #9 on: April 23, 2021, 07:03:31 PM »
Maybe a bath in some strong instant coffee. TC
Might give that a try. In the past it’s been onion skins, tea, or Osage orange shavings.
Andover, Vermont

Offline David G

  • Full Member
  • ***
  • Posts: 113
Re: Finished New England horn
« Reply #10 on: April 23, 2021, 07:28:51 PM »
Rich...you’ve made yourself a very nice personal horn. It’s got the cool factor ! If you age it any please give us a updated pic. Thanks for sharing.

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4309
  • We all make mistakes.
Re: Finished New England horn
« Reply #11 on: April 23, 2021, 08:48:42 PM »
  Rich I got to ask. Is the horn two pieces..?  Yeah my 👀 need work but it looks like it to me.
 Nice work all the same. 
Oldtravler

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #12 on: April 23, 2021, 08:58:49 PM »
One piece! Following Tim Crosby’s advice I boiled it to soften then cut in the scallops. I tried s gouge but my trusty v chisel was the ticket. Took several heatings to get it done.
Andover, Vermont

Offline Dwshotwell

  • Sr. Member
  • ****
  • Posts: 267
Re: Finished New England horn
« Reply #13 on: April 23, 2021, 10:37:44 PM »

I confess that I do a lot of work in the moment. I just get after it like some guy in the field who thinks it’s time to put his initials on his horn.


Got a figure that's how it went down originally... bunch of soldiers sitting around the campfire with their knives and time on their hands. Rather than imitate what they created in a literal sense, recreate the spirit in which they did it. Pretty cool.
David Shotwell

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #14 on: April 23, 2021, 11:33:09 PM »
Rich...you’ve made yourself a very nice personal horn. It’s got the cool factor ! If you age it any please give us a updated pic. Thanks for sharing.

It came out a little uneven but the color is right compared with originals I own. Guess I should have fresh scraped the whole thing first. It’ll do for grungy.







« Last Edit: April 24, 2021, 12:44:38 AM by rich pierce »
Andover, Vermont

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18054
  • AKA TimBuckII
Re: Finished New England horn
« Reply #15 on: April 24, 2021, 12:35:22 AM »
 Looks right. What did you end up using on it?

   Tim

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18915
Re: Finished New England horn
« Reply #16 on: April 24, 2021, 12:43:54 AM »
Looks right. What did you end up using on it?

   Tim
Tea, onion skins, and Osage wood shavings.
Andover, Vermont

Offline Clint

  • Sr. Member
  • ****
  • Posts: 316
Re: Finished New England horn
« Reply #17 on: April 24, 2021, 04:03:39 AM »
When I saw your initials I imediately thought of "Barret's Privateers" by Stan Rogers
It's on utube

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7668
Re: Finished New England horn
« Reply #18 on: April 24, 2021, 04:49:18 AM »
I like the Grungy better.  ;D :)

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 725
Re: Finished New England horn
« Reply #19 on: April 24, 2021, 05:24:25 AM »
That is pretty nice. I like the panel work.
Richard

Offline Nordnecker

  • Hero Member
  • *****
  • Posts: 1216
Re: Finished New England horn
« Reply #20 on: April 24, 2021, 02:59:39 PM »
Oh yeah.
"I can no longer stand back and allow communist infiltration, communist indoctrination and the international communist conspiracy to sap and impurify our precious bodily fluids."- Gen Jack T. Ripper

Offline vanu

  • Full Member
  • ***
  • Posts: 190
Re: Finished New England horn
« Reply #21 on: April 24, 2021, 04:49:31 PM »
Very nice Rich!

Offline David G

  • Full Member
  • ***
  • Posts: 113
Re: Finished New England horn
« Reply #22 on: April 24, 2021, 07:05:57 PM »
Rich...you’ve made yourself a very nice personal horn. It’s got the cool factor ! If you age it any please give us a updated pic. Thanks for sharing.

It came out a little uneven but the color is right compared with originals I own. Guess I should have fresh scraped the whole thing first. It’ll do for grungy.

Pretty dang close on color...well done.






Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Finished New England horn
« Reply #23 on: April 26, 2021, 02:05:03 AM »
Rich, you really nailed the color on this one!  Nice job!

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline aaronc

  • Hero Member
  • *****
  • Posts: 759
Re: Finished New England horn
« Reply #24 on: May 13, 2021, 07:37:43 PM »
Great horn...you hit a home run on the color.
- Aaron C
At the work bench.