« previous next »
Pages: [1]   Go Down

Author Topic: barrel breeching  (Read 3446 times)

Offline Simon

  • Jr. Member
  • **
  • Posts: 87
barrel breeching
« on: September 10, 2009, 10:52:00 PM »
Earlier in the year there was a thread , in gun building, about barrel breeching.There was a lot of good information on the subject.  I would like to thank every one that posted on the thread, especially Dan Phariss  for for the pictures and explanation of the process.  I just finished successfully breeching a barrel with the help of the info in that thread. thanks again everyone.

Mel
Logged
Mel Kidd

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19520
Re: barrel breeching
« Reply #1 on: September 11, 2009, 12:36:41 AM »
It's a good feeling knowing it's been done right.  Lots of folks don't know or don't bother to find out if their barrel is breeched properly.  Now you're an expert and can pass it on!  That's how it works around here.
Logged
Andover, Vermont

ironwolf

  • Guest
Re: barrel breeching
« Reply #2 on: September 11, 2009, 01:59:32 AM »
  AMEN to all that.

  KW
Logged

ironwolf

  • Guest
Re: barrel breeching
« Reply #3 on: September 11, 2009, 02:07:39 AM »
  I'm with Taylor.  Let the guard cover what it can, and lay a skid pan into the belly.  Very common period repair.

  Kevin
Logged

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Re: barrel breeching
« Reply #4 on: September 11, 2009, 03:33:57 AM »
Quote from: ironwolf on September 11, 2009, 02:07:39 AM
  I'm with Taylor.  Let the guard cover what it can, and lay a skid pan into the belly.  Very common period repair.

  Kevin
Come now Kev I do believe you wanted this in the ramrod hole section :D
Logged

ironwolf

  • Guest
Re: barrel breeching
« Reply #5 on: September 11, 2009, 01:07:43 PM »
 Good eye Roger.
Logged
Pages: [1]   Go Up
« previous next »