Author Topic: starting powder charge  (Read 891 times)

Offline rnb1969

  • Starting Member
  • *
  • Posts: 18
starting powder charge
« on: June 22, 2021, 11:52:15 PM »
I just finished building a 54 caliber flintlock pistol with a 12 inch barrel. Now I am looking for suggestions for a starting load. I will shoot a 530 diameter round ball the same as I use in my rifle. Any help will be appreciated.
Ron

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18819
Re: starting powder charge
« Reply #1 on: June 23, 2021, 12:24:58 AM »
Fast twist barrel? I’d start with 40 grains of FFG and go up till accuracy stops getting better or the recoil becomes distracting. Somewhere in the 40-60 grains range should do well.
Andover, Vermont

Offline walks with gun

  • Full Member
  • ***
  • Posts: 156
Re: starting powder charge
« Reply #2 on: June 23, 2021, 04:07:04 AM »
  Start with 25-30 grains of 2 or 3 F.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Re: starting powder charge
« Reply #3 on: June 25, 2021, 04:03:32 AM »
ditto - although this most certainly depends on the ROTwist.
My .54 with 60" twists needs 55gr. 3F to shoot well to 50yards.
Daryl

"a gun without hammers is like a spaniel without ears" King George V