Author Topic: My Marc Tornichio .32 Rifle (Read 3564 times)

Daniel Coats · « **on:** September 18, 2021, 06:54:20 PM »

Here's some pictures of my new to me long rifle I bought from Jack Brooks yesterday. It has a curly ash stock and all of the small parts were made by Marc. The swamped 44" long barrel is 32 caliber and the rifle handles beautifully. Probably the most handsome flint squirrel rifle I've ever had the pleasure of handling personally. I hope you enjoy the pictures taken with my cell phone this morning they're not the best but it will give you an idea of the exceptional quality of this fine rifle.

I'm really proud of it!

Daryl · « **Reply #1 on:** September 18, 2021, 09:20:09 PM »

Now THAT is a "shooter" indeed.

Cades Cove Fiddler · « **Reply #2 on:** September 18, 2021, 09:45:27 PM »

... Nice "Deep River" styling,.....

Don Adams · « **Reply #3 on:** September 19, 2021, 04:49:31 AM »

Sharp looking rifle!

vtmtnman · « **Reply #4 on:** September 19, 2021, 05:27:45 PM »

That's a nice piece.I'd be proud to tote that through the woods.

B.Barker · « **Reply #5 on:** September 20, 2021, 04:19:14 AM »

I hope Marc starts building again. He is really good at building them iron mounted rifle from the south. You got a nice one Dan.

Keith Zimmerman · « **Reply #6 on:** September 20, 2021, 04:34:55 AM »

Beautiful. I have a SMR in 45 from him with a 48in Rayl barrel. Great shooter. Thanks for posting the pics. What are the specs of yours?

Daniel Coats · « **Reply #7 on:** September 20, 2021, 05:22:52 AM »

Thanks for the comments everyone!

Pull is 13 3/8 and weighs just under 7 pounds.

Eddie Southgate · « **Reply #8 on:** September 20, 2021, 05:41:40 AM »

That is a beautiful rifle for sure , congratulations .

Daniel Coats · « **Reply #9 on:** September 20, 2021, 04:54:29 PM »

I remember seeing this trigger guard style somewhere but can't recall for sure. Can someone reply back and refresh my memory please?

Daniel Coats · « **Reply #10 on:** September 20, 2021, 08:05:12 PM »

Correction on the wood, it's curly walnut not ash.

oldtravler61 · « **Reply #11 on:** September 20, 2021, 08:50:21 PM »

One fine rifle I do say. Like the nose cap, simple trigger guard and trigger. You did good Daniel.

Daniel Coats · « **Reply #12 on:** September 20, 2021, 08:59:39 PM »

Quote from: Daniel Coats on September 20, 2021, 04:54:29 PM

I remember seeing this trigger guard style somewhere but can't recall for sure. Can someone reply back and refresh my memory please?

Based on Phillip Cameron who worked in North Carolina, deep river school.

Daniel Coats · « **Reply #13 on:** September 20, 2021, 09:03:39 PM »

Quote from: oldtravler61 on September 20, 2021, 08:50:21 PM

One fine rifle I do say. Like the nose cap, simple trigger guard and trigger. You did good Daniel.

Thanks!

Was custom made some years back on request and the original owner's initial is inlet in cow horn on the cheek piece and the butt plate was his request also and Marc designed it.

flinchrocket · « **Reply #14 on:** September 21, 2021, 03:44:52 AM »

Quote from: Daniel Coats on September 20, 2021, 04:54:29 PM

I remember seeing this trigger guard style somewhere but can't recall for sure. Can someone reply back and refresh my memory please?

Is this what your thinking.

pic sharing

Daniel Coats · « **Reply #15 on:** September 21, 2021, 03:55:47 AM »

Quote from: flinchrocket on September 21, 2021, 03:44:52 AM

Quote from: Daniel Coats on September 20, 2021, 04:54:29 PM
I remember seeing this trigger guard style somewhere but can't recall for sure. Can someone reply back and refresh my memory please?

Is this what your thinking.

pic sharing

Yes very similar. Where is that one from?

flinchrocket · « **Reply #16 on:** September 21, 2021, 04:20:29 AM »

It is from a class Marc attended that was put on by Ian Pratt and Jim Kibler (I think). I found it on page 7 of Marc’s old ALR posts.

B.Barker · « **Reply #17 on:** September 25, 2021, 04:16:22 AM »

I'm not sure that this is the rifle Marc showed me when he was working on it or one very similar. He seen a simple rifle with a trigger guard and single trigger like yours in one of Jerry Nobles books on southern mountain rifles and used it for inspiration.

Daniel Coats · « **Reply #18 on:** September 25, 2021, 08:17:21 AM »

Quote from: B.Barker on September 25, 2021, 04:16:22 AM

I'm not sure that this is the rifle Marc showed me when he was working on it or one very similar. He seen a simple rifle with a trigger guard and single trigger like yours in one of Jerry Nobles books on southern mountain rifles and used it for inspiration.

There was another one he made almost identical but the nose cap was shorter at least from the pictures I've seen.

Dan Kiel · « **Reply #19 on:** September 26, 2021, 04:22:24 AM »

I believe you'll find pictures of the other Marc Tornichio rifle you talked about on the Riser Blog December 29, 2011 (with a lighter color stock) and again on August 28, 2014 (antiqued with a darker stock)..

Shopdog · « **Reply #20 on:** September 26, 2021, 08:31:28 PM »

Quote from: Daniel Coats on September 20, 2021, 09:03:39 PM

Quote from: oldtravler61 on September 20, 2021, 08:50:21 PM
One fine rifle I do say. Like the nose cap, simple trigger guard and trigger. You did good Daniel.

Thanks!

Was custom made some years back on request and the original owner's initial is inlet in cow horn on the cheek piece and the butt plate was his request also and Marc designed it.

Fantastic! Thanks for sharing it - im particularly drawn to the buttplate - is that a wood (sans buttplate) with metal tail coming down from comb or a full metal buttplate with brighter metal inlay? Cant tell. Either way is super design. Is this based on an original or totally the commissioner’s and Marc’s idea?

Daniel Coats · « **Reply #21 on:** September 26, 2021, 10:39:26 PM »

Marc told me the customer asked for the heel to be protected so he came up with this heart/spade shaped design. I believe it to be one of a kind and agree it's fantastic!

J. Talbert · « **Reply #22 on:** October 02, 2021, 05:04:17 AM »

Marc is really good at adding some distinctive flair to a relatively plain rifle.

As for the butt stock inlay, Mike Cox is a master of that treatment. A number of years ago I saw several great rifles by Mike that had intricate inlays in the end grain of the butt stock.

Jeff

Fly Navy · « **Reply #23 on:** October 02, 2021, 07:38:30 AM »

Very nice rifle.

News:

Author Topic: My Marc Tornichio .32 Rifle (Read 3564 times)