Author Topic: Wall Gun Stock Dimensions  (Read 1020 times)

Offline Reegee/Flint

  • Jr. Member
  • **
  • Posts: 55
Wall Gun Stock Dimensions
« on: October 24, 2021, 01:52:16 AM »
Looking to cut a walnut slab for a Wall Gun..........can anybody give me some stock dimensions?
Thanks in advance...

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13263
    • Mike Brooks Gunmaker
Re: Wall Gun Stock Dimensions
« Reply #1 on: January 03, 2022, 05:06:42 PM »
How big is the breech? How wide is the buutplate? How thick is the lock bolster?
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2199
  • Oklahoma
Re: Wall Gun Stock Dimensions
« Reply #2 on: January 03, 2022, 10:04:51 PM »
Huge  ;D
Psalms 144

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18934
Re: Wall Gun Stock Dimensions
« Reply #3 on: January 03, 2022, 10:11:20 PM »
How big is the breech? How wide is the buutplate? How thick is the lock bolster?
3” thick should be plenty.
Andover, Vermont

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15079
Re: Wall Gun Stock Dimensions
« Reply #4 on: January 03, 2022, 11:46:56 PM »
Maybe 4"? Much depends on barrel, lock and butt dimensions, as Mike noted.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13263
    • Mike Brooks Gunmaker
Re: Wall Gun Stock Dimensions
« Reply #5 on: January 04, 2022, 12:33:33 AM »
I think I used a 3" blank when I built mine.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?