« previous next »
Pages: [1] 2   Go Down

Author Topic: Henry Albright Rifle Finally Finished!  (Read 4702 times)

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Henry Albright Rifle Finally Finished!
« on: November 12, 2021, 09:07:23 AM »
It has been a while since I have posted a build so I thought I would share the latest one.  This rifle was a project I started in Jack Brooks class at NMLRA Gunsmithing Seminar three years ago, after which it spent a lot of time in the corner of the shop only to come out and get worked on between other builds. The rifle is a composite of elements I gleaned from several of my favorite Albright guns.

The barrel is a NOS Paris barrel in .45 cal.  The triggers were handmade for the rifle and that process can been seen here: https://americanlongrifles.org/forum/index.php?topic=55027.0  The trigger guard and butt-plate are Mike Brooks castings and were an absolute joy to work with.  The remainder of the mountings were made in the shop by yours truly.  The inlays are coin silver pounded out and cut to shape.  The eagle cheek piece was made from a thin piece of sterling that I peened into a negative carved in scrap maple (repoussé?), then the backside of the eagle was filled with solder paste and the sterling was soldered to a .040 sheet of German silver. The star was then cut to shape with a jewelers saw and inlet.  The rifle was finished in a quasi-aged mode but not abused.  Anyway, enough rambling and here are some photos - questions and comments are welcome!



















































Thanks for taking the time to look!

Curtis
« Last Edit: November 12, 2021, 09:10:42 AM by Curtis »
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline hawkeye

  • Hero Member
  • *****
  • Posts: 763
Re: Henry Albright Rifle Finally Finished!
« Reply #1 on: November 12, 2021, 10:41:22 AM »
Only thing to say is,, WOOW gorgeous,,
Thank you for sharing
Logged

Offline JohnnyFM

  • Sr. Member
  • ****
  • Posts: 356
Re: Henry Albright Rifle Finally Finished!
« Reply #2 on: November 12, 2021, 11:51:06 AM »
Superbly done. Neatly executed patch box design and installation, really like the return on the lid.  There’s a lot of detail on this rifle gunne that would have been lost with fancy curl. Good choice going with less figure.
Thanks for being generous with the photos.

Regards,
Johnny
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19520
Re: Henry Albright Rifle Finally Finished!
« Reply #3 on: November 12, 2021, 01:48:00 PM »
Gotta be happy with that all day long.
Logged
Andover, Vermont

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1763
  • There's more than one way to skin a cat.
Re: Henry Albright Rifle Finally Finished!
« Reply #4 on: November 12, 2021, 01:50:01 PM »
Beautiful work, love the carving and engraving. Thanks for posting the pictures.

Best regards
Rolf
Logged

Offline elk killer

  • Hero Member
  • *****
  • Posts: 1514
Re: Henry Albright Rifle Finally Finished!
« Reply #5 on: November 12, 2021, 02:42:21 PM »
WOW..!!
Logged
only flintlocks remain interesting..

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Henry Albright Rifle Finally Finished!
« Reply #6 on: November 12, 2021, 03:25:09 PM »
Hi Curtis,   Having done a number of copies of H. Albright's work and having done some restoration on an original, I looked for a lot of details that are commonly missed.   You have checked most all of the boxes, good job!   The cheekpiece eagle (made by repose .20 thick silver) looks to be well done.  Albright was a master at using a wide shader to do the long foliage elements.  Getting the shader to cut a well defined consistent line down the center of a leaf is no easy task.    You captured the graceful C scrolls and volutes that  Albright was noted for.   I like it very much.    Ron
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7009
Re: Henry Albright Rifle Finally Finished!
« Reply #7 on: November 12, 2021, 03:42:09 PM »
Beautiful Curtis!!  I love the shading in the carving and the eagle.  Everything shows so well and creates the illusion of depth.

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1342
    • Powder Horns and Such
Re: Henry Albright Rifle Finally Finished!
« Reply #8 on: November 12, 2021, 03:57:07 PM »
Well that is Inspirational! Congratulations indeed!
Logged

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1286
  • Great X Grandpa
Re: Henry Albright Rifle Finally Finished!
« Reply #9 on: November 12, 2021, 04:21:23 PM »
Well done! Nice to see something a little different. Three years was worth the wait.
Logged
Robert Wolfe
Northern Indiana

Offline snapper

  • Hero Member
  • *****
  • Posts: 2432
Re: Henry Albright Rifle Finally Finished!
« Reply #10 on: November 12, 2021, 04:41:31 PM »
Curtis

That rifle is a joy to look at.

You going to keep this one?

Fleener
Logged
My taste are simple:  I am easily satisfied with the best.  Winston Churchill

Offline bama

  • Hero Member
  • *****
  • Posts: 2173
    • Calvary Longrifles
Re: Henry Albright Rifle Finally Finished!
« Reply #11 on: November 12, 2021, 04:44:14 PM »
Dang nice rifle Curtis, very well done. I like it very much, sure wish you would bring to the Alabama show so I could roll it around. ;D
Logged
Jim Parker

"An Honest Man is worth his weight in Gold"

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Henry Albright Rifle Finally Finished!
« Reply #12 on: November 12, 2021, 05:36:11 PM »
Nifty , some might even  say exceptional. The carving and engraving are great and the color is nice and  warm. And of course the buttplate and trigger guard are perfect.😁
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline ed lundquist

  • Sr. Member
  • ****
  • Posts: 429
Re: Henry Albright Rifle Finally Finished!
« Reply #13 on: November 12, 2021, 05:55:28 PM »
That's is a swell rifle! Where did you hide the patchbox release? Love all the little details, thanks for sharing.
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7906
Re: Henry Albright Rifle Finally Finished!
« Reply #14 on: November 12, 2021, 06:04:14 PM »
I probably can't say anything that hasnt been already said but I like it. Nice crisp work with a real warm feeling.
Logged

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: Henry Albright Rifle Finally Finished!
« Reply #15 on: November 12, 2021, 06:07:12 PM »
Curtis beautiful as always
Logged

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2306
Re: Henry Albright Rifle Finally Finished!
« Reply #16 on: November 12, 2021, 06:47:39 PM »
Cool rifle!  Nothing run-of-the-mill about it.  VERY distinctive.

Nice work Curtis.

Jeff
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline DavidC

  • Sr. Member
  • ****
  • Posts: 355
Re: Henry Albright Rifle Finally Finished!
« Reply #17 on: November 12, 2021, 09:09:19 PM »
I'm impressed at the balance you managed with such a variety of embellishments; it looks like there is little wasted space yet it doesn't look cluttered like most ottoman guns.

I'm jealous of how smooth and consistent that carving looks.
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Henry Albright Rifle Finally Finished!
« Reply #18 on: November 12, 2021, 09:11:55 PM »
Curtis - marvelous and the colour/contrasts - just wonderful.
I did notice the lands looked a little sharp.
« Last Edit: November 13, 2021, 03:00:43 AM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Henry Albright Rifle Finally Finished!
« Reply #19 on: November 12, 2021, 10:24:14 PM »
Really nicely made rifle Curtis.  I got down to the toe plate images before I realized that the stock wasn't particularly curly...that says a lot for all the fine details that make this a splendid rifle.  I'm curious too, about the patch box release....?
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Glenn

  • Hero Member
  • *****
  • Posts: 507
Re: Henry Albright Rifle Finally Finished!
« Reply #20 on: November 12, 2021, 10:39:30 PM »
Beautiful rifle 👍
Logged
Many of them cried; "Me no Alamo - Me no Goliad", and for most of them these were the last words they spoke.

Offline coopersdad

  • Full Member
  • ***
  • Posts: 152
Re: Henry Albright Rifle Finally Finished!
« Reply #21 on: November 12, 2021, 11:27:54 PM »
Wonderful Curtis!  Probably a bad guess, but is the box release the top corner of the upper plate where it meets the buttplate?
Logged
Mike Westcott

ghostdncr

  • Guest
Re: Henry Albright Rifle Finally Finished!
« Reply #22 on: November 13, 2021, 12:55:28 AM »
Absolutely delightful. What a treasure!
Logged

Offline TommyG

  • Hero Member
  • *****
  • Posts: 601
  • "Double Trouble"
Re: Henry Albright Rifle Finally Finished!
« Reply #23 on: November 13, 2021, 03:29:16 AM »
Wow Curtis!!  That is something special.  Wonderful job!
Logged

Offline helwood

  • Full Member
  • ***
  • Posts: 149
Re: Henry Albright Rifle Finally Finished!
« Reply #24 on: November 13, 2021, 04:17:20 AM »
Really like your latest work.  I can only see it on my Cell phone  my Apple Laptop  says it can't  open it (the pics) because it's  not secure.  Not sure how to fix that yet.  But  from my little pics it sure looks great.
       Most Excellent,  Hank
Logged
Pages: [1] 2   Go Up
« previous next »