Author Topic: Rococo Jaeger Mounts (Read 3767 times)

Ron Scott · « **on:** January 28, 2022, 08:50:48 PM »

Here are a set of mounts form a 1750s Suhl style Jaeger Rifle. I have molds made for this and another similar Jaeger. I'm curious about interest in offering this style at the NMLRA Seminar.

Craig Wilcox · « **Reply #1 on:** January 28, 2022, 08:57:49 PM »

Can't speak for all, Ron, but for me those Rococo brass pieces are top-notch. If they are cast as perfectly as your other pieces, they will be a knockout.

Can't attend a seminar due to health problems, but as soon as I finish my not-Rococo Jaeger, I'd like to give those a good try. And I know you'd be happy to furnish the walnut plank!

Ed Wenger · « **Reply #2 on:** January 29, 2022, 02:14:31 AM »

Ron…, those are incredible! Certainly has my interest! Best,

Ed

martin9 · « **Reply #3 on:** January 29, 2022, 05:22:00 AM »

I'd buy a set for sure. I just got a set of your chiseled jaeger hardware from MBS....very nice, clean castings.

Fly Navy · « **Reply #4 on:** January 29, 2022, 07:49:27 AM »

Beautiful work.

acorn20 · « **Reply #5 on:** January 29, 2022, 10:18:55 AM »

Those are beautiful, Ron. I've used the other mounts I purchased from you and I'd be interested in a set of these if you make extra over and above what you need for your class. I would love it if these were cast in steel so an inlay of gold could be applied to the recesses. Regards,

Dan

Birddog6 · « **Reply #6 on:** January 29, 2022, 03:09:58 PM »

I'm interested in a set as well.

Scott Bumpus · « **Reply #7 on:** January 29, 2022, 06:56:09 PM »

Sell a few extras so you can buy some new gloves

Medic980 · « **Reply #8 on:** January 29, 2022, 07:48:38 PM »

I'd be interested in a set of these for my german transitional rifle.

Jakob · « **Reply #9 on:** January 31, 2022, 09:18:00 AM »

If they would be ready for May/June-ish, I would happily take a set.

Ron Scott · « **Reply #10 on:** January 31, 2022, 05:06:22 PM »

Wax's shipped to the foundry Friday last week. I would anticipate that the casings will arrive in March. I'll make a list of requests and contact those before listing them.

DavidC · « **Reply #11 on:** January 31, 2022, 08:23:17 PM »

Any idea on a price range? I'm interested in a set.

Carl Young · « **Reply #12 on:** February 01, 2022, 12:07:07 AM »

Ron please add me to the list of those interested.

Thanks,
Carl

Jakob · « **Reply #13 on:** February 01, 2022, 02:23:23 AM »

As an aside, do you know what gilding technique they used for the gold? I was thinking that adding the reverse (white gold) on the brass casts might actually look nice, but have only ever done keum-boo style gilding on silver.

Ron Scott · « **Reply #14 on:** February 01, 2022, 05:28:16 AM »

The price will likely run about the same as MLBS. I won't know until I get the invoicing. I am hoping half these cast in steel and the others in brass. It appears the thin gold has been set into a roughened shallow background.

Jakob · « **Reply #15 on:** February 01, 2022, 07:27:01 AM »

So it's inlay rather than gilded with gold leaf?

Ron Scott · « **Reply #16 on:** February 01, 2022, 04:47:24 PM »

Yes, in this case it is inlay. A potential modern alternative might be to mask off around the recessed areas and apply a heavy gold electroplate .

Medic980 · « **Reply #17 on:** February 05, 2022, 04:43:21 AM »

That is some gorgeous furniture. Any chance I could buy a set?

Trevor

Ron Scott · « **Reply #18 on:** February 05, 2022, 05:36:20 PM »

When the castings arrive from the foundry, I will post in the sale category.

Medic980 · « **Reply #19 on:** March 10, 2022, 09:27:27 PM »

Quote from: Ron Scott on February 05, 2022, 05:36:20 PM

When the castings arrive from the foundry, I will post in the sale category.

Sorry Ron I'm not trying to be a pain but was wondering if you've heard anything on when you might get these back from the foundry?

Thanks,
Trevor

Ron Scott · « **Reply #20 on:** March 11, 2022, 03:45:46 AM »

No word yet. The Foundry isn't much for communication. In the past my notification is the U{S driver knocking on the door and indicating I need to write a COD check. That being said, enough time has elapsed for me to be anticipating a box soon.

acorn20 · « **Reply #21 on:** May 11, 2022, 11:13:17 PM »

Hi Ron, you thought these castings might be available in March. I didn't miss this offering did I?

Bob Roller · « **Reply #22 on:** May 12, 2022, 02:30:47 PM »

The lettering in the posts from acorn20 is easily readable and the others require me to use reading glasses.WHAT is going on here?
Bob Roller

Craig Wilcox · « **Reply #23 on:** May 13, 2022, 04:17:03 PM »

Bob, at the top of the "reply" form, there are various "buttons" to choose font style/size/color, etc. I picked size 14 for this reply, but you can select many sizes, fonts, color.

Keb · « **Reply #24 on:** May 13, 2022, 04:40:29 PM »

News:

Author Topic: Rococo Jaeger Mounts (Read 3767 times)

Birddog6