« previous next »
Pages: [1]   Go Down

Author Topic: Jim Spray Iron Tip On An Outside The Box Horn  (Read 2341 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Jim Spray Iron Tip On An Outside The Box Horn
« on: February 07, 2022, 05:08:37 PM »
 It is about 9 1/4" around the outside curve and 7 tip-to-tip. The butt is Walnut about 1 5/8" wide, it is threaded 1/2-8. The threaded dowel is Hickory, screwed into the cap and secured with a steel pin. Attached to the horn with 3 steel pins.
 The tip is one Jim made for me, it is very well done. It is pinned to the horn body by 3 steel nails. The bands are Pewter and held in place by 3 pins each. For the color it was boiled in a mix of water based dye. The strap keeper is 1/16", the legs were pounded square and small barbs were cut all around to hold it in place.
 The bottom with it in my hand give you a better idea of its size,

  Tim C.

















« Last Edit: February 07, 2022, 05:13:20 PM by Tim Crosby »
Logged

Offline Jim Spray

  • Full Member
  • ***
  • Posts: 226
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #1 on: February 07, 2022, 08:11:35 PM »
Very nice Tim. The pewter band look great with the dark colored horn. Well done again.

Jim
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #2 on: February 07, 2022, 08:20:34 PM »
Very nice - great look all around ;) 8)
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Yazel.xring

  • Sr. Member
  • ****
  • Posts: 339
  • Ethan Yazel ILoveMuzzleloading.com
    • I Love Muzzleloading
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #3 on: February 07, 2022, 10:07:35 PM »
Delightful
Logged
Hi, I’m Ethan and I Love Muzzleloading

ILoveMuzzleloading.com, independently reporting on muzzleloading and the people who have kept it going for generations.

Offline old george

  • Hero Member
  • *****
  • Posts: 709
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #4 on: February 08, 2022, 10:05:39 PM »
That's a beauty Tim. ;D


george
Logged
I cannot go to Hades: Satan has a restraining order against me. :)

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #5 on: February 09, 2022, 05:55:56 PM »
Not your usual style brother!   Neat horn, especially with those pewter bands.  What is all of that white stuff in the background?  :-D   
Logged

pamtnman

  • Guest
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #6 on: February 24, 2022, 08:28:05 AM »
Really nice work. I very much want a couple of Jim Spray's metal horn valves.
Logged

Offline TN Longhunter

  • Sr. Member
  • ****
  • Posts: 287
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #7 on: February 24, 2022, 04:04:37 PM »
Lot of work in that horn. Very nice. Now you made me want to try pewter bands.
Logged
Don Spires
Tennessee Longhunters
Patron Life NRA
NMLRA
CLA

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #8 on: February 24, 2022, 04:21:06 PM »
Beautiful horn.  The pewter bands really set it off!

Ken
Logged
Failure only comes when you stop trying.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #9 on: February 24, 2022, 06:31:26 PM »
Quote from: TN Longhunter on February 24, 2022, 04:04:37 PM
Lot of work in that horn. Very nice. Now you made me want to try pewter bands.

  If you haven't seen it this may help. Any questions just ask.

    Tim

 https://americanlongrifles.org/forum/index.php?topic=35027.msg336410#msg336410
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #10 on: February 24, 2022, 06:34:37 PM »
 Thanks for the positive comments. It is different but the proportions worked out well and  it's a solid little horn.

   Tim
Logged

Offline TN Longhunter

  • Sr. Member
  • ****
  • Posts: 287
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #11 on: February 24, 2022, 10:14:42 PM »
Quote from: Tim Crosby on February 24, 2022, 06:31:26 PM
Quote from: TN Longhunter on February 24, 2022, 04:04:37 PM
Lot of work in that horn. Very nice. Now you made me want to try pewter bands.

  If you haven't seen it this may help. Any questions just ask.

    Tim

 https://americanlongrifles.org/forum/index.php?topic=35027.msg336410#msg336410

I remembered that from when it was posted. Was going to look it up.
Thanks,
Logged
Don Spires
Tennessee Longhunters
Patron Life NRA
NMLRA
CLA

Offline Mike M

  • Jr. Member
  • **
  • Posts: 61
    • Ali-Mic Alaskan Malamutes
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #12 on: February 25, 2022, 04:23:18 AM »
Very nice.
Logged
V/R,
Mike
In God We Trust
So Mote It Be ∴

Offline SciAggie

  • Starting Member
  • *
  • Posts: 19
Re: Jim Spray Iron Tip On An Outside The Box Horn
« Reply #13 on: August 26, 2022, 07:39:04 PM »


Logged
Pages: [1]   Go Up
« previous next »