Author Topic: UPDATED: Beck Rifle Project....Stained! (Read 3034 times)

archer829 · « **on:** April 30, 2022, 07:01:20 PM »

After years of slow progress, my first carved rifle--inspired by JP Beck's work--is getting closer to completion. Most of the carving is done, although I still have a bit of modeling and incising to do on the tang carving.

Here's a link to my past posts about this project:

https://americanlongrifles.org/forum/index.php?topic=69989.msg702066#msg702066

Anyway, here is where things sit right now. It's far from perfect, but I'm pretty happy with how things are going. Sometimes, though, it's nice to have a different perspective, so if anyone sees anything fixable that I can address before it's too late, please let me know! Thanks!

Jim Kibler · « **Reply #1 on:** April 30, 2022, 07:06:31 PM »

Very pretty!

smylee grouch · « **Reply #2 on:** April 30, 2022, 07:11:41 PM »

Looks bold, looks Beck!

BillKilgore · « **Reply #3 on:** April 30, 2022, 11:33:33 PM »

Your carving is beautiful and the stock looks like it will have gorgeous tiger stripes.

Algae · « **Reply #4 on:** May 02, 2022, 01:43:04 AM »

Crisp and clean! Beautiful work!!

Al J.

BOB HILL · « **Reply #5 on:** May 02, 2022, 02:52:15 PM »

You’re doing an outstanding job. Thanks for sharing your progress with us.
Bob

t.caster · « **Reply #6 on:** May 02, 2022, 04:31:36 PM »

I've studied and done a number of Beck's, and your carving looks right on the money! Very nice!

bama · « **Reply #7 on:** May 03, 2022, 02:10:36 AM »

Yes indeed, that is fine as frog hair.

Tom Currie · « **Reply #8 on:** May 03, 2022, 07:52:44 PM »

Very nicely done !

archer829 · « **Reply #9 on:** May 05, 2022, 01:37:25 AM »

Thanks, everyone! Hopefully I'll be able to post pictures of the finished rifle before too long!

Bob Gerard · « **Reply #10 on:** May 05, 2022, 04:30:49 AM »

That looks delicious

Fly Navy · « **Reply #11 on:** May 05, 2022, 07:57:44 AM »

Looking forward to seeing the finished rifle.

archer829 · « **Reply #12 on:** June 21, 2022, 05:44:01 AM »

I’ve spent the last few months cleaning up the carving and tweaking the architecture, and I’m finally to the point of staining and varnishing. Been dreading using iron nitrate but also pretty sure it was what I’d use due to originality. It turned out pretty nicely, and the curl is incredible. Actually it detracts from the carving a bit, but I’m not too concerned about that. Now it's on to varnishing.....

archer829 · « **Reply #13 on:** June 21, 2022, 08:28:28 AM »

Here’s a picture of the original. It’s quite a bit redder than every other Beck I’ve seen, so I’ve decided to stick with a color that’s more like the usual Beck color:

Preacher Dave · « **Reply #14 on:** June 21, 2022, 10:00:03 AM »

Remarkable likeness to the original carving, good job, congratulations!

rich pierce · « **Reply #15 on:** June 21, 2022, 02:53:49 PM »

Terrific job with the clean carving and background.

Ken G · « **Reply #16 on:** June 21, 2022, 03:05:07 PM »

Looking great. Very clean.

Ken

Otto · « **Reply #17 on:** June 21, 2022, 03:20:27 PM »

Very well done. Everything is crisp and your cheek piece carving is remarkable in its attribution to the original. Nice work

Mike Brooks · « **Reply #18 on:** June 21, 2022, 03:49:40 PM »

Cool beans man

oldtravler61 · « **Reply #19 on:** June 21, 2022, 05:03:38 PM »

Excellent....!

D. Taylor Sapergia · « **Reply #20 on:** June 21, 2022, 07:13:50 PM »

Very nicely done.

TommyG · « **Reply #21 on:** June 21, 2022, 07:31:19 PM »

That is some clean and very well executed work. Look forward to seeing it on completion

News:

Author Topic: UPDATED: Beck Rifle Project....Stained! (Read 3034 times)