« previous next »
Pages: [1]   Go Down

Author Topic: Moravian inspired build  (Read 980 times)

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 153
Moravian inspired build
« on: July 20, 2022, 10:51:08 PM »
As some of you know I am a student being taught by Jeff Talbert. This build will be based on the Andreas Albrecht that some refer to as "The Two Tailed Dog". I'm not going for an exact copy as this is my first build from a blank stock. I just really love the sculptured shape of those early Moravian guns. It's become kind of an obsession of mine lately.

I used the KRF image of the original and the included dimensions to blow the picture up and print it. Jeff created a pattern from the picture. We started out thinking we could use a Chambers Deluxe Siler lock but Jeff found that the lock plate needed a little bit of curve so we switched to a Chambers Dale Johnson which seems to be an appropriate choice when comparing it to the original lock. The stock, trigger guard and butt plate are from Allen Martin. The barrel is a .50 cal 42" Colerain swamped B weight. Jeff is going to teach me how to make the ramrod pipes.

Below are some pictures of us working on it at Jeff's shop. I will post pictures so everyone can follow our progress and provide feedback.


























Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13263
    • Mike Brooks Gunmaker
Re: Moravian inspired build
« Reply #1 on: July 21, 2022, 01:16:57 AM »
I used to put in barrels like that. :P
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18933
Re: Moravian inspired build
« Reply #2 on: July 21, 2022, 02:38:31 AM »
Quote from: Mike Brooks on July 21, 2022, 01:16:57 AM
I used to put in barrels like that. :P
Until you went off the rails? ;D

Nice adaptation on the saw!

Logged
Andover, Vermont

Offline HighUintas

  • Sr. Member
  • ****
  • Posts: 446
Re: Moravian inspired build
« Reply #3 on: July 21, 2022, 03:04:33 AM »
Wawawa.

Looking good. I may use that technique on my next one
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13263
    • Mike Brooks Gunmaker
Re: Moravian inspired build
« Reply #4 on: July 21, 2022, 04:20:57 AM »
Quote from: rich pierce on July 21, 2022, 02:38:31 AM
Quote from: Mike Brooks on July 21, 2022, 01:16:57 AM
I used to put in barrels like that. :P
Until you went off the rails? ;D

Nice adaptation on the saw!
I did 14 like that  and then I met  Fred Miller.  Never did another!
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2276
Re: Moravian inspired build
« Reply #5 on: July 21, 2022, 04:28:34 AM »
Quote from: Mike Brooks on July 21, 2022, 04:20:57 AM
Quote from: rich pierce on July 21, 2022, 02:38:31 AM
Quote from: Mike Brooks on July 21, 2022, 01:16:57 AM
I used to put in barrels like that. :P
Until you went off the rails? ;D

Nice adaptation on the saw!
I did 14 like that  and then I met  Fred Miller.  Never did another!

You see the rust on those rails don’t you…  ;D
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3667
Re: Moravian inspired build
« Reply #6 on: July 21, 2022, 06:36:36 PM »

[/quote]
I did 14 like that  and then I met  Fred Miller.  Never did another!
[/quote]

Fred retired years ago! He was the BEST!!!  Who does them for you now?
I just hate all the shipping costs and wait time, so I do them similar to above.
Logged
Tom C.
Pages: [1]   Go Up
« previous next »