« previous next »
Pages: [1]   Go Down

Author Topic: Nipple thread size?  (Read 1291 times)

Offline Granville

  • Starting Member
  • *
  • Posts: 8
Nipple thread size?
« on: June 30, 2022, 08:36:11 PM »
I want to replace the nipple on my Uberti Santa Fe Hawken. Its one of the .53 calibers. Can any other U berti Hawken owners tell me the thread size or what nipples work for them? Thanks in advance!
Logged

Offline Gemmer

  • Jr. Member
  • **
  • Posts: 51
Re: Nipple thread size?
« Reply #1 on: June 30, 2022, 09:05:44 PM »
Call Track of the Wolf, they will know.
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Nipple thread size?
« Reply #2 on: June 30, 2022, 09:06:20 PM »
Taylor would know, but he's busy getting ready for our local rendezvous. Sry, I can't help.
That barrel (part of one) is what I used for my pistol. A VERY accurate pistol if fed enough powder.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Nipple thread size?
« Reply #3 on: June 30, 2022, 09:07:05 PM »
Quote from: Gemmer on June 30, 2022, 09:05:44 PM
Call Track of the Wolf, they will know.

Good idea, might even be noted in their "nipple list".
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline 45-110

  • Hero Member
  • *****
  • Posts: 543
Re: Nipple thread size?
« Reply #4 on: June 30, 2022, 09:11:32 PM »
Seems the time to pick up a inch/metric thread gage. No guessing then, and assuming you have a micrometer also.
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Nipple thread size?
« Reply #5 on: July 02, 2022, 02:30:53 PM »
Probably an M6 by who knows what thread.If that breech/bolster isn't hardened I would rethread it to the American 1/4x28 or find some one who has had experience in threading.If the thread is now .236 the .250 tap will clean it up. One millimeter is ,0394.
Bob Roller
Logged

Offline jgraham1

  • Full Member
  • ***
  • Posts: 156
Re: Nipple thread size?
« Reply #6 on: July 22, 2022, 07:21:50 PM »
I have one of these Hawkens and it is threaded for 1/4x28.

Jerry
Logged

Offline Granville

  • Starting Member
  • *
  • Posts: 8
Re: Nipple thread size?
« Reply #7 on: August 03, 2022, 10:01:36 PM »
 I haven't had much time lately to  even do much anything besides work. Hope I can get back to it after Friday!  I'm much obliged for all the responses, thanks guys.   
Logged

Offline Marvin S

  • Jr. Member
  • **
  • Posts: 88
Re: Nipple thread size?
« Reply #8 on: August 05, 2022, 04:04:30 AM »
I have one and think it’s 1/4-28. Take it and try on some known nuts if in doubt
Logged
Pages: [1]   Go Up
« previous next »