« previous next »
Pages: [1]   Go Down

Author Topic: First one, Kibler Colonial  (Read 2813 times)

Offline Don

  • Starting Member
  • *
  • Posts: 11
First one, Kibler Colonial
« on: April 29, 2022, 03:43:21 AM »
Just finished my first one. Learned a lot.  My vision for the browning didn't happen, my learning curve issues, so went with the 'patina-ed' look.  Used sal alminac, cupric sulphite in distilled water.  Tannic acid, ferric sulphite in distilled for the wood.  Decided to 'Antiqued' the brass to match the way things were going, used Jax Black for brass.  Added the toe plate and patch box end plate as after thoughts, before staining of course.  There's some nicks and blemishes from a first timer but they'll become part of it as it ages I suspect.  Four whiskerings, tannic acid, a whiskering, ferric nitrate treatment, two sloppy coats of 50/50 turpentine and tung oil, sand back and five hand rubbed tung oil treatments.  Some touch up and a waxing to do and then off to the range for load development.  many thanks to Jim Kibler, advice and posts here from you folks, RH Mccrory books, William Buchele book, google and you tube I managed to get it done. 





Logged

Offline P.Bigham

  • Hero Member
  • *****
  • Posts: 577
Re: First one, Kibler Colonial
« Reply #1 on: April 29, 2022, 05:27:00 AM »
Nice. Hope you enjoy your 1st.
Logged
" not all who wander are lost"

Offline J.M.Browning

  • Full Member
  • ***
  • Posts: 171
Re: First one, Kibler Colonial
« Reply #2 on: April 29, 2022, 03:16:12 PM »
Very nice job looks great !
Logged
Thank you Boone , Glass with all the contemplate I read with todays (shooter's lightly taken as such) , you keep things simple .

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7678
Re: First one, Kibler Colonial
« Reply #3 on: April 29, 2022, 09:06:50 PM »
From where I sit thats a nice looking no nonsense rifle. I think you will enjoy it.
Logged

Offline MuskratMike

  • Hero Member
  • *****
  • Posts: 2197
Re: First one, Kibler Colonial
« Reply #4 on: April 29, 2022, 10:43:00 PM »
1st rifle? Looks fine to me, you should be proud of it as I am sure you are.
Logged
"Muskrat" Mike McGuire
Keep your eyes on the skyline, your flint sharp and powder dry.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15079
Re: First one, Kibler Colonial
« Reply #5 on: April 30, 2022, 01:08:52 AM »
Looks good to me, too. ;D
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline frankie

  • Starting Member
  • *
  • Posts: 16
Re: First one, Kibler Colonial
« Reply #6 on: May 24, 2022, 04:07:17 AM »
Great work, how many hours in it. Im thinking of getting one
Logged

Offline Tacitus

  • Starting Member
  • *
  • Posts: 19
Re: First one, Kibler Colonial
« Reply #7 on: May 24, 2022, 08:08:52 AM »
Very nice!
Logged

Offline Don

  • Starting Member
  • *
  • Posts: 11
Re: First one, Kibler Colonial
« Reply #8 on: June 19, 2022, 07:31:58 PM »
Sorry Frankie, not been on here a lot lately.  Hours into it: 30 for fitting it, lots of back and forth to Jim's videos and other refs, I took it slow. Finishing likley as much, or more, being my first time doing all these processes.  I tend to also over think things sometimes though.  In the end, worth every hour🙂.
Logged

Offline Grischi

  • Full Member
  • ***
  • Posts: 168
    • Youtube: 'Ist das Kunst oder kann das weg?'
Re: First one, Kibler Colonial
« Reply #9 on: July 27, 2022, 08:17:57 PM »
Kibler kits are great.I like the clean look of this one. Though I have to admit that the nicely carved builds attract me too.

Christian
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5314
  • My passion is longrifles!
    • martialartsusa.com
Re: First one, Kibler Colonial
« Reply #10 on: July 27, 2022, 09:59:09 PM »
I think it looks very good especially for your first.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline jgraham1

  • Full Member
  • ***
  • Posts: 150
Re: First one, Kibler Colonial
« Reply #11 on: July 27, 2022, 10:36:37 PM »
I think you did a great job on it. You should be proud.

Jerry
Logged
Pages: [1]   Go Up
« previous next »