Author Topic: UK Park Rifle  (Read 1239 times)

Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
UK Park Rifle
« on: August 18, 2022, 11:10:54 PM »
Enclose  are images {Not a Long rifle} but a UK Park Rifle that may be of interest to members  It has a 36 Damascus  barrel it 40 cal made by English  gun makes Gasqoine & Dyson  This percussion rifle was used in the big estates parks for the control of pests and deer etc
Feltwad









Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7909
Re: UK Park Rifle
« Reply #1 on: August 18, 2022, 11:16:29 PM »
First class in all respects. Thanks for letting us see it.  :)

Offline Mattox Forge

  • Sr. Member
  • ****
  • Posts: 404
Re: UK Park Rifle
« Reply #2 on: August 19, 2022, 12:58:10 AM »
Feltwad,

Very nice piece there. That is a heavy looking barrel for a .40 caliber rifle. You wouldn't happen to know the the width of the barrel where it joins the breech piece and at the muzzle? I particularly like the shape if the bolster.

Mike

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9693
Re: UK Park Rifle
« Reply #3 on: August 19, 2022, 02:17:11 AM »
That breech is typical of English guns of that time and that lock is like one of the 7 or 8 I made for this style of rifle.
It's a scaled down version of the full size match rifle locks and that gun may be as well.I have one of these locks started
but don't know if I will ever finish it and it hs a much better looking hammer than the one shown which may be a replacement.
Thanks for showing this one.
Bob Roller

Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
Re: UK Park Rifle
« Reply #4 on: August 19, 2022, 02:29:22 PM »
This is a original Park Rifle with no replacements  built approximately 1850 by Gasqoine & Dyson  of Manchester , Lancashire UK their business was at  1 Blue Boar Ct 1846-1852 then 26 Market Pace 1854- 1864
The measurements of the octangle Damascus barrel is 1 inch at the breech and tapers down to 7/10 inch at the muzzle
Feltwad

Offline JBJ

  • Hero Member
  • *****
  • Posts: 648
Re: UK Park Rifle
« Reply #5 on: August 19, 2022, 04:01:02 PM »
Thanks for showing such an elegant rifle!

J.B.

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3477
Re: UK Park Rifle
« Reply #6 on: August 19, 2022, 04:38:10 PM »
They do not come any nicer, feltwad!
Thank you. Lovely photos!

Wouldn't this fall under the category of" Rook and rabbit" rifle, old pal?

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: UK Park Rifle
« Reply #7 on: August 19, 2022, 04:45:27 PM »
Nice. Is it a bullet gun or a ball gun?
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline snapper

  • Hero Member
  • *****
  • Posts: 2433
Re: UK Park Rifle
« Reply #8 on: August 19, 2022, 05:19:23 PM »
Always love looking at English, Irish and Scottish guns.

Fleener
My taste are simple:  I am easily satisfied with the best.  Winston Churchill

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: UK Park Rifle
« Reply #9 on: August 19, 2022, 07:14:42 PM »
Loverly indeed.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
Re: UK Park Rifle
« Reply #10 on: August 20, 2022, 02:55:53 PM »
Nice. Is it a bullet gun or a ball gun?

I have shot   a ball  from it has a test fire  it was average at 100yards , the rifling may be more suited for a bullet  it is 6 groves and two full turns  in 36 inch barrel.

Pukka,
I would say it is neither  A rook or rabbit rifle that I have worked on although not many were a smaller calibre
Feltwad
« Last Edit: August 21, 2022, 05:57:28 AM by Ky-Flinter »

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9693
Re: UK Park Rifle
« Reply #11 on: August 20, 2022, 07:43:06 PM »
Same twist as the Henry barreled Whitworth I had years ago.It will handle a 500 grain bullet.
Bob Roller