Author Topic: Sparrow Flintlock Pistol Done  (Read 1980 times)

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Sparrow Flintlock Pistol Done
« on: August 23, 2022, 05:30:23 PM »
It's done. I varnished the pistol after allowing the oil-rub to dry. (I may wax the stock also in several weeks time.)
It's been a great experience making this Flintlock pistol. There were some challenges as always, but the build went by pretty smoothly.
The butt cap inlet was painstaking but it came out pretty well for my first attempt at this type. I plan to make a more correct ramrod later, and perhaps even try and modify the pan (rounding it to a more English style) as well.
The pistol is from a kit by Muzzleloader Builder's Supply. The 10 inch barrel is .50 caliber and a smoothbore. The stock is American Black Walnut with brass mountings.
This should be a fun gun to shoot, both roundball and maybe even some bird shot as well.










Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19462
Re: Sparrow Flintlock Pistol Done
« Reply #1 on: August 23, 2022, 05:47:20 PM »
Very nicely done; a clean and attractive build.
Andover, Vermont

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2907
Re: Sparrow Flintlock Pistol Done
« Reply #2 on: August 23, 2022, 05:53:56 PM »
Agree. Fine job!
Stop Marxism in America

Offline Algae

  • Full Member
  • ***
  • Posts: 196
Re: Sparrow Flintlock Pistol Done
« Reply #3 on: August 23, 2022, 05:58:12 PM »
Very nice!! I like it1

Al J.

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Re: Sparrow Flintlock Pistol Done
« Reply #4 on: August 23, 2022, 05:59:02 PM »
Thank you Rich, Wayne and Algae!
I hope the next one will be as fun and with fewer 'oopsies'.

Offline Sequatchie Rifle

  • Global Moderator
  • Hero Member
  • *
  • Posts: 978
  • F. & A.M. Helion #1; 3rd SFG(ABN)
Re: Sparrow Flintlock Pistol Done
« Reply #5 on: August 23, 2022, 06:47:10 PM »
I like it!  Very nicely executed!!!!!! I want one.
"We fight not for glory, nor riches nor honors, but for freedom alone, which no good man gives up except with his life.” Declaration of Arbroath, 1320

Offline iloco

  • Hero Member
  • *****
  • Posts: 1029
  • Old Timer, Chilhowie, Va.
Re: Sparrow Flintlock Pistol Done
« Reply #6 on: August 23, 2022, 07:04:43 PM »
Nice job on the pistol.  I am curious how it will shoot a round ball. 
iloco

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Re: Sparrow Flintlock Pistol Done
« Reply #7 on: August 23, 2022, 11:04:41 PM »
Thank you Sequatchi Rifle- I am honored 🙂
« Last Edit: August 23, 2022, 11:13:41 PM by Bob Gerard »

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Re: Sparrow Flintlock Pistol Done
« Reply #8 on: August 23, 2022, 11:11:05 PM »
Hi iloco- I am curious about it’s performance with round ball too. 10” smoothbore can’t be that accurate but we’ll see 😎

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Sparrow Flintlock Pistol Done
« Reply #9 on: August 24, 2022, 04:21:17 AM »
Nicely done sir.  I enjoyed the build-along too.

Offline Fly Navy

  • Full Member
  • ***
  • Posts: 147
Re: Sparrow Flintlock Pistol Done
« Reply #10 on: August 24, 2022, 07:05:10 AM »
Good looking pistol, well done.

Offline Justin Urbantas

  • Hero Member
  • *****
  • Posts: 1394
Re: Sparrow Flintlock Pistol Done
« Reply #11 on: August 24, 2022, 08:25:03 AM »
Hi iloco- I am curious about it’s performance with round ball too. 10” smoothbore can’t be that accurate but we’ll see 😎
Smoothbore pistols can be quite accurate  with the right load. This was a 3 shot group from a bench at 15 yards with my .50 cal smoothbore.


free image hosting website

Offline Justin Urbantas

  • Hero Member
  • *****
  • Posts: 1394
Re: Sparrow Flintlock Pistol Done
« Reply #12 on: August 24, 2022, 08:25:47 AM »
Looks really good Bob. Jack Sparrow would be proud to carry it.

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3436
Re: Sparrow Flintlock Pistol Done
« Reply #13 on: August 24, 2022, 04:31:54 PM »
Justin,
For smooth bore pistol accuracy, look at Olympic results.    Incredibly good scores off-hand !

Offline Justin Urbantas

  • Hero Member
  • *****
  • Posts: 1394
Re: Sparrow Flintlock Pistol Done
« Reply #14 on: August 24, 2022, 05:05:01 PM »
I didn't know they shot smoothbores in the Olympics.

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Re: Sparrow Flintlock Pistol Done
« Reply #15 on: August 24, 2022, 09:27:40 PM »
Well I had a bit of time this afternoon to try out the Sparrow. I had some .440 round ball and used heavy denim for patch. 30 grains of powder at 12 yards. I used a portable work table to rest the gun on- not the best arrangement but it was OK enough for the trial run. Yup, It was fun.
I will try some bird shot next time 🙂


Offline Pennsylvania Dutchman

  • Sr. Member
  • ****
  • Posts: 341
Re: Sparrow Flintlock Pistol Done
« Reply #16 on: August 26, 2022, 02:58:25 AM »
Very Nice Work!
Mark Poley

Offline JohnnyFM

  • Sr. Member
  • ****
  • Posts: 358
Re: Sparrow Flintlock Pistol Done
« Reply #17 on: August 28, 2022, 06:11:15 PM »
Repel all boarders! Outstanding!

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15750
Re: Sparrow Flintlock Pistol Done
« Reply #18 on: August 28, 2022, 06:54:23 PM »
Nicely done. Buck and ball loads are fun.  I'd use maybe #3 or 4 buckshot.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline alacran

  • Hero Member
  • *****
  • Posts: 2252
Re: Sparrow Flintlock Pistol Done
« Reply #19 on: August 29, 2022, 02:28:11 PM »
Nice pistol. The tang carving is interesting. Those pistols are meant to be shot with one hand. I have never shot a pistol off a bench. If you can't make it shoot offhand, use buck shot as Daryl suggests.
A man's rights rest in three boxes: the ballot box, the jury box, and the cartridge box.  Frederick Douglass

Offline DHouse

  • Full Member
  • ***
  • Posts: 132
Re: Sparrow Flintlock Pistol Done
« Reply #20 on: August 29, 2022, 05:21:21 PM »
Came out great! Thanks for sharing!

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1336
    • Powder Horns and Such
Re: Sparrow Flintlock Pistol Done
« Reply #21 on: August 30, 2022, 03:46:34 AM »
Thank you folks!
A friend gave me a bunch of .495 round balls, which may be better than the ,445 that I was using (all I had)!
If I can pull myself away from the workbench and shoot it I will be interested to see how it goes  :)
The bird shot is another adventure I am looking to try as well!