Author Topic: old fashioned strip type window calk ?  (Read 632 times)

Offline web365ster

  • Starting Member
  • *
  • Posts: 6
old fashioned strip type window calk ?
« on: November 09, 2022, 06:25:20 PM »
 I use old fashioned strip type window calk for 2 thing that it works well for.

- I put a thin worm of it between my lock and barrel when installing the lock. It seals that gap perfectly and I rarely remove the lock when cleaning. Usually only before and after deer season. The inside of my locks stay corrosion free

-I carry some to stick on the seam between the frizzen and the barrel when hunting. This keeps the stray water drop from running into the pan through that crack when not using a cows knee.
                                     Turtle

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7683
Re: old fashioned strip type window calk ?
« Reply #1 on: November 09, 2022, 08:19:57 PM »
Those strips should work. Some use chap stick and I use a mix of bear grease and bees wax about peanut butter consistency and use a cotton swab to wipe away what squishes out when I lower the frizzen.