Author Topic: Horn In The "White"  (Read 557 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 16436
  • AKA TimBuckII
Horn In The "White"
« on: November 22, 2022, 04:47:07 PM »
 This one was left natural it is going to be carved by another hand. It's a Big horn at 20 1/2" around the outsid curve and 15 tip-to-tip, lot of room for carving. The butt is Apple held in by the same steel pins that hold the base band on, it is 3" in diameter and hollowed out about 3/4ths its length. The tip is 2 pieces of Whitetail antler pinned together with 3 wooden pegs, it is a screw tip threaded 5/8-11. The ring at the neck is for the strap, it is held by 3 Steel pins. For a large horn it is suprizingly light.

  Tim C.













Offline TN Longhunter

  • Sr. Member
  • ****
  • Posts: 280
Re: Horn In The "White"
« Reply #1 on: November 22, 2022, 04:53:44 PM »
Very nice canvas for someone to add their touch to. Great looking horn.
Don Spires
Tennessee Longhunters
Patron Life NRA
NMLRA
CLA

Offline Ken Prather

  • Hero Member
  • *****
  • Posts: 1308
    • TomBob Outdoors, LLC.
Re: Horn In The "White"
« Reply #2 on: November 22, 2022, 06:58:22 PM »
very nice horn work
Galations 2:20

Offline MuskratMike

  • Hero Member
  • *****
  • Posts: 1828
Re: Horn In The "White"
« Reply #3 on: November 22, 2022, 08:07:05 PM »
I hope the finished product will be shown here.
"Muskrat" Mike McGuire
Keep your eyes on the skyline, your flint sharp and powder dry.

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 6747
Re: Horn In The "White"
« Reply #4 on: November 22, 2022, 08:18:44 PM »
Nice looking horn. That might be one " Hungry " horn taking lots of powder to fill it up.

Offline bigsmoke

  • Sr. Member
  • ****
  • Posts: 359
Re: Horn In The "White"
« Reply #5 on: November 22, 2022, 09:12:24 PM »
Tim,
As always, a very nice job.
Sorry, it's not a style that I particularily care for, but regardless, your talent is just dripping off of it.
It looks like there is enough room on that horn to inscribe the first three chapters of "War and Peace".
Keep it up, you do really, really nice work.
John (Bigsmoke)

Offline old george

  • Hero Member
  • *****
  • Posts: 606
Re: Horn In The "White"
« Reply #6 on: November 22, 2022, 09:19:49 PM »
Nice looking "curvy" horn waiting to see it in a finished state.

george
I cannot go to Hades: Satan has a restraining order against me. :)

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 2947
  • James Rogers
    • Fowling Piece
Re: Horn In The "White"
« Reply #7 on: November 23, 2022, 03:10:07 AM »
Lovely!

Offline flatsguide

  • Sr. Member
  • ****
  • Posts: 493
Re: Horn In The "White"
« Reply #8 on: November 23, 2022, 06:26:22 AM »
Very nice work. That fish stopper looks good and is a nice touch.
Cheers Richard

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 16436
  • AKA TimBuckII
Re: Horn In The "White"
« Reply #9 on: November 23, 2022, 04:08:35 PM »
  Thanks for the complemets.

     Tim




Offline aaronc

  • Hero Member
  • *****
  • Posts: 649
    • Kentucky Anlter Worx
Re: Horn In The "White"
« Reply #10 on: November 23, 2022, 06:40:00 PM »
Incredible looking horn Tim.

Offline Jeff Murray

  • Sr. Member
  • ****
  • Posts: 379
Re: Horn In The "White"
« Reply #11 on: November 24, 2022, 05:29:21 AM »
Nice horn.  the spout work really accents the double curve of the horn.

Offline hawkeye

  • Hero Member
  • *****
  • Posts: 592
Re: Horn In The "White"
« Reply #12 on: November 24, 2022, 01:09:50 PM »
Very nice horn Tim
Best regards Hawkeye