Author Topic: Ferric Nitrate from Crystals Question  (Read 973 times)

Offline DanL

  • Sr. Member
  • ****
  • Posts: 285
Ferric Nitrate from Crystals Question
« on: December 12, 2022, 07:35:13 PM »
I have some older Ferric Nitrate that was in a lab. The original amount of purplish crystals was estimated at 125grams or about 1/4 jar of 500 gram lab bottle.

Over the years the cap was left slightly loose and humidity entered and now the ferric nitrate crystals are a thick liquid solution similar in viscosity to syrup.

My question is: I would like to dilute this solution more. What is best to use to dilute the product?  I was thinking Distilled/deionized water but I wanted to check here before I did anything.

I plan to use it on some test wood samples of maple and other to see how it looks.

Thanks,
Dan
From God's Farm in Alabama; God bless America & "Alba gu Brath !!"

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7480
  • Born in Kentucke, just 250 years late
Re: Ferric Nitrate from Crystals Question
« Reply #1 on: December 12, 2022, 09:20:43 PM »
DanL,

I just did a search on Ferric Nitrate crystals and found that some people mix their Ferric Nitrate crystals with distilled water, others use denatured alcohol.  I guess you could use either.  The thought with using alcohol was it would raise the grain less.

Ron
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline DanL

  • Sr. Member
  • ****
  • Posts: 285
Re: Ferric Nitrate from Crystals Question
« Reply #2 on: December 12, 2022, 10:28:03 PM »
Thanks Ron. I performed a search here and saw many different opinions of course. In hind sight, since the solution that I have was caused by humidity in the air, I will continue a dilution with distilled water.

The solution that I have is a beautiful reddish-brown which I hope to convey to a stock at some point. From reading the search results, It seems I should not have an issue if I go too far with the water dilution. I can do repeated applications to get the color that I prefer or close to it.

Live and learn....
Thanks again.
Dan
From God's Farm in Alabama; God bless America & "Alba gu Brath !!"

Offline Waksupi

  • Sr. Member
  • ****
  • Posts: 357
  • Ric Carter, Somers, Montana
Re: Ferric Nitrate from Crystals Question
« Reply #3 on: December 13, 2022, 12:19:37 AM »
I use denatured alcohol. Different amounts will make lighter hues, so I can start with a light color, and add another coat if I want it darkened more.
Ric Carter
Somers, Montana

Offline davec2

  • Hero Member
  • *****
  • Posts: 2941
    • The Lucky Bag
Re: Ferric Nitrate from Crystals Question
« Reply #4 on: December 13, 2022, 05:39:58 AM »
DanL,

Adding water should be easy and work well.  If you decide you have diluted the iron nitrate too far just evaporate some of the water on a hot plate in a Pyrex dish....nice thing about dilutions, you can add or subtract the dilutent fairly easily.

"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Ferric Nitrate from Crystals Question
« Reply #5 on: December 14, 2022, 05:14:50 AM »
I add denatured alcohol to  stain made with distilled water  to give better penetration on traditional stock finishes when repairs are needed. I use dostilled water based stain otherwise.

He who dares not offend cannot be honest. Thomas Paine