Author Topic: Front sight fiddling (Read 2292 times)

flatsguide · « **on:** February 14, 2023, 06:27:51 PM »

This is V1 of the sight...don’t like it! It is too high, I screwed up and cut it too narrow so the female dovetail shows and the diameter of .100 is too narrow too. V2 will be .115 diameter and much closer to the the top bbl flat and taper a bit more. The ‘Ivory’ bead is synthetic Ivory. Turned with a .058” dia. stem to fit into the blade. I made a filling guide from tool steel to file the taper and keep the blade ‘round’ chucked up in the lathe rig in the pic.

bnewberry · « **Reply #1 on:** February 14, 2023, 06:31:05 PM »

Your v2 will be awesome and v3 will be ready for the commercial market!

smylee grouch · « **Reply #2 on:** February 14, 2023, 08:29:46 PM »

The older I get the fatter I need my front sight so I found .100 to be too thin. Then I found some " T " iron that was .125 thick and could make a much more visible to me sight even after tapering it some what.

ScottH · « **Reply #3 on:** February 14, 2023, 09:07:18 PM »

That looks really nice!

Daryl · « **Reply #4 on:** February 14, 2023, 09:31:00 PM »

Interesting front sight, but I prefer the more 'PC' type of sight. Your front sight is beautifully made, but I feel your front sight's design is too "modern" looking.
It would be absolutely perfect on a modern rifle's raised front sight base.

The sight on Taylor's Joseph Lang rifle is the ultimate & perfectly matches other front sights such as I have seen on a Purdey rifle, etc.

smylee grouch · « **Reply #5 on:** February 14, 2023, 09:52:38 PM »

I seem to see my sight better if it is tapered from the face to the front like that Lang sight.

Daryl · « **Reply #6 on:** February 14, 2023, 10:18:22 PM »

I agree- and that is why all of the sights pictured so far, have that taper, some more than others.

flatsguide · « **Reply #7 on:** February 15, 2023, 01:37:14 AM »

Daryl I like you second picture of a sight. My V2 will be more along those lines. I agree that mine looks a bit to modern for my eyes too, that’s one of the reasons for a number two.
Thanks for the kind words fellows.
https://ibb.co/jbRk6rD

Daryl · « **Reply #8 on:** February 15, 2023, 02:59:30 AM »

The slanted brass beads show up amazingly well in the bush or when light is dim.
A touch with a dry erase felt marking pen, makes the front sight non-reflective in bright light and then a touch with a finger or thumb removes it.
Dry erase felt pens are flat-black, not shiny black like a permanent felt marker pen.

P.W.Berkuta · « **Reply #9 on:** February 16, 2023, 09:15:00 PM »

VERY NICELY MADE and practical especially for the hunter

flatsguide · « **Reply #10 on:** February 27, 2023, 07:22:04 AM »

Made another sight and after looking at the photos I think I’ll taper it a bit more from front to back.

duca · « **Reply #11 on:** February 27, 2023, 10:30:59 AM »

Wow that’s cool! Looks like a Rocket Ship!! Lol, I like it

bluenoser · « **Reply #12 on:** February 27, 2023, 04:46:08 PM »

Man. I do like that jig!
I think I need to copy it. Thanks for the idea.

Daryl · « **Reply #13 on:** February 27, 2023, 10:15:51 PM »

Nice.

Tim Crosby · « **Reply #14 on:** February 28, 2023, 12:03:16 AM »

Pretty neat, they remind me of hood ornaments from the 50s.

Tim C.

flatsguide · « **Reply #15 on:** February 28, 2023, 03:00:56 AM »

Rocket ship to hood ornament...I may not be going in the right direction lol.
Here are a few photos showing the holding fixture and the grind on the fly cutter to mill the front sight basic form. The fly cutter was 4” in diameter at a speed of around 130 RPM, the slowest my Bridgeport clone will go. The sight material is 12L14.

bluenoser · « **Reply #16 on:** February 28, 2023, 04:59:04 AM »

Thanks for the additional pics.
Never would have thought to use the fly cutter.

duca · « **Reply #17 on:** February 28, 2023, 10:47:22 AM »

Quote from: Tim Crosby on February 28, 2023, 12:03:16 AM

Pretty neat, they remind me of hood ornaments from the 50s.

Tim C.

OMG…Exactly!!!! Lol

flatsguide · « **Reply #18 on:** March 04, 2023, 05:59:11 PM »

I’m finally done fiddling with the sight. Nitre blued it and stuck in the faux ivory bead.

classic northwest brewski crossword

smylee grouch · « **Reply #19 on:** March 04, 2023, 08:02:07 PM »

Sure looks like a nice rifle. How long is the barrel, how many barrel keys and ramrod pipes?

Daryl · « **Reply #20 on:** March 04, 2023, 08:34:51 PM »

Lovely bit of kit.

P.W.Berkuta · « **Reply #21 on:** March 04, 2023, 09:17:38 PM »

I must say you do fantastic work

. I would have put money that you used a CNC mill to produce this part

. It most likely would take me 3 plus days to make one like it

flatsguide · « **Reply #22 on:** March 05, 2023, 07:24:05 AM »

Thanks for the kind words, it is very much appreciated. It has two pipes, one just back of the muzzle and the entry pipe and it has 3 barrel pins of .063” music wire with a 32” bbl. it took awhile making that front sight, I work slow and I’m 84 with a really bad back, so if I can get 3 to 4 hours in the shop a day I’m doing good. I’ll try to get some photos of the rifle taken and posted. All that’s left to do is determine the rear sight height and machine that. I plan on a folding rear sight with on fixed and one folding blade and after that the engraving. Its a .58 cal and I plan on sighting it in at 100 yards with a pretty stiff load like 120 gns for the fixed blade and 150 yards for the folding leaf.
Cheers Richard

News:

Author Topic: Front sight fiddling (Read 2292 times)