General discussion > Black Powder Shooting
Burr at the breech
Molly:
With every cap lock we have as well as one that was sold sometime ago there is a frustrating feature. When cleaning or wiping the barrel the patched jag hangs on a burr at the breech. It is on the same side as the lock and I assume it is a leftover feature of drilling the hole to insert the drum. One rifle has a patented breech and it too has the same feature. A modest inconvenience in most cases but there have been times when it was impossible to remove the rod without a good dose of liquid. Messy wet barrels don't make for fun shooting.
Anyone have a suggestion on an easy remedy?
MAS
smylee grouch:
I had one like that and I turned the jag down a tad and it helped somewhat. You might also try a worm and tow.
BOB HILL:
The drum may be a little long and catching the patch.
Bob
bluenoser:
Or a little too short and the patch is hanging up on the edge of the hole. It doesn't take much.
Eric Krewson:
Pull the breech plug and correct the problem.
Navigation
[0] Message Index
[#] Next page
Go to full version