Author Topic: Iron nitrate stain  (Read 2703 times)

Offline Rick Rhodes

  • Starting Member
  • *
  • Posts: 19
Iron nitrate stain
« on: March 13, 2023, 10:55:02 PM »
I read about using ferris chloride to make stain ,I used 3 tablespoons to 8 ozs. Of rubbing alcohol  added some finish nails. Three weeks later all I  get is a dark greyish-black after I heat. Any thoughts on a fix would be appreciated

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5122
Re: Iron nitrate stain
« Reply #1 on: March 13, 2023, 11:50:43 PM »
Wrong stuff.  You want ferric nitrate.
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7496
  • Born in Kentucke, just 250 years late
Re: Iron nitrate stain
« Reply #2 on: March 14, 2023, 12:00:16 AM »
What TOF said.... and don't add nails, just mix and use, no waiting.  As for the mixing ratio, you can start with less water or alcohol for darker stain and add more liquid to lighten it up as you like.

Ron
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Rick Rhodes

  • Starting Member
  • *
  • Posts: 19
Re: Iron nitrate stain
« Reply #3 on: March 14, 2023, 02:27:06 AM »
Thank you, good to know

Offline Bill Madden

  • Starting Member
  • *
  • Posts: 45
Re: Iron nitrate stain
« Reply #4 on: March 14, 2023, 05:29:30 PM »
You can buy ferric nitrate crystals online. All you need to do is add water or alcohol. If making ferric nitrate from scratch, you will need to add one part nitric acid to three parts water (always add the acid to the water to avoid splash back) in a pyrex container. Then add iron. I prefer pieces of old rusty barbed wire harvested from abandoned homesteads. The concoction will heat up rapidly, hence the pyrex container. Add more iron as necessary until the acid has consumed most of it and foaming has quit. Decant and store in a bottle with a loose stopper for a couple of days before sealing tightly.
Bill

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Iron nitrate stain
« Reply #5 on: March 14, 2023, 07:01:13 PM »
The action of ferric nitrate solution is enhanced on curly maple if you apply a tannic acid solution to the wood first.  The ferric nitrate will react with the tannic acid in the wood and turn it black.   Judicious sanding and burnishing will cut back the black to expose the lighter coloured wood and leave the black in the curl.
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Rick Rhodes

  • Starting Member
  • *
  • Posts: 19
Re: Iron nitrate stain
« Reply #6 on: March 15, 2023, 03:31:29 AM »
Thanks for the feedback,I used tannic acid on my last 2 gun builds very pleased with the results