Author Topic: Tacked Knife Sheath  (Read 4653 times)

Offline Poor Bull

  • Full Member
  • ***
  • Posts: 142
Tacked Knife Sheath
« on: August 12, 2008, 11:07:21 PM »
I am excited about my recent success with using brass tacks.  I've ruined a lot of tacks and leather attempting to make a knife sheath.  The trick was to heat the point red hot with a propane torch while holding the head with pliers.  After cooling, the nail can be easily bent over and the point hammered back into the leather.
« Last Edit: April 01, 2022, 11:49:50 PM by Dennis Glazener »
If you climb in the saddle, be ready for the ride.

Powder River Let'er Buck

Offline LRB

  • Hero Member
  • *****
  • Posts: 1567
Re: Tacked Knife Sheath
« Reply #1 on: August 13, 2008, 01:47:35 PM »
  You might find it even easier using the original type all solid brass tacks.     They cost more, but are probably worth the extra, and are correct.

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Tacked Knife Sheath
« Reply #2 on: August 15, 2008, 07:20:11 PM »
That is a nice looking sheath, glad you got it figured out.
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!