« previous next »
Pages: [1]   Go Down

Author Topic: flintlock lock ID  (Read 1267 times)

Offline Jim Curlee

  • Full Member
  • ***
  • Posts: 227
flintlock lock ID
« on: April 19, 2023, 02:10:24 AM »
I bought a flintlock, modern components.
The flintlock itself has an R stamped into the bolster.
Any ideas on who made the lock?

Thanks
Jim




« Last Edit: April 19, 2023, 03:50:58 PM by Jim Curlee »
Logged

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2309
Re: flintlock lock ID
« Reply #1 on: April 19, 2023, 06:14:21 AM »
Not much to go on.
Got any pictures?

Jeff
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: flintlock lock ID
« Reply #2 on: April 19, 2023, 07:41:35 AM »
Photos front and back would be quite helpful.
Logged

Online Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: flintlock lock ID
« Reply #3 on: April 19, 2023, 04:51:35 PM »
I can tell you with certainty who did NOT make it.
Bob Roller
Logged

Offline mark esterly

  • Sr. Member
  • ****
  • Posts: 408
Re: flintlock lock ID
« Reply #4 on: April 19, 2023, 05:08:41 PM »
looks like a chambers siler
Logged
living in the hope of HIS coming.......

Online smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: flintlock lock ID
« Reply #5 on: April 19, 2023, 05:15:06 PM »
I thought it was a Siler but don't know if it was one of Chambers.  :-\
Logged

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2309
Re: flintlock lock ID
« Reply #6 on: April 20, 2023, 12:20:04 AM »
Quote from: mark esterly on April 19, 2023, 05:08:41 PM
looks like a chambers siler

Agreed,
Jeff
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7011
Re: flintlock lock ID
« Reply #7 on: April 20, 2023, 12:38:41 AM »
Hi,
It is a large Siler lock.  Not sure if it was made by Chambers.  The R stamp is probably the assembler. I have a large Siler with a D stamped in the same place.

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline rudyc

  • Full Member
  • ***
  • Posts: 198
Re: flintlock lock ID
« Reply #8 on: April 20, 2023, 03:24:51 AM »
Did Robert Ray assemble some locks for Chambers??
Logged
"It's a good day for something"

Offline Bigmon

  • Hero Member
  • *****
  • Posts: 1411
Re: flintlock lock ID
« Reply #9 on: April 20, 2023, 03:55:27 AM »
I have a large Siler that the frizzen spring is held by a screw from the back side?? Did they make different ones?
Did some shecking, mine must be the DELUXE Siler, with that spring?
« Last Edit: April 20, 2023, 04:07:23 PM by Bigmon »
Logged

Offline Jim Chambers

  • Hero Member
  • *****
  • Posts: 1828
Re: flintlock lock ID
« Reply #10 on: April 20, 2023, 04:53:09 AM »
The lock is a large Siler lock that was assembled by us.
Logged
Pages: [1]   Go Up
« previous next »