Author Topic: Early Hawken Breech Plug Source (Found One Thanks)  (Read 1089 times)

Offline rsells

  • Hero Member
  • *****
  • Posts: 680
Early Hawken Breech Plug Source (Found One Thanks)
« on: July 10, 2023, 07:47:44 AM »
A while back someone on this forum told us of a source of a couple early Hawken breech plugs with the straight vertical mating surface between the tang and hooked part of the breech plug.  I documented the supplier and checked with the them and they had a couple in stock at that time.  I did not purchase one at that time, and now I cannot remember the supplier or find the info.  Anyone with this info please send me a note.  Thanks.
                                                                      Roger Sells



















 
« Last Edit: July 11, 2023, 07:00:49 AM by rsells »

Offline redheart

  • Hero Member
  • *****
  • Posts: 598
Re: Early Hawken Breech Plug Source
« Reply #1 on: July 10, 2023, 08:20:49 AM »
The Griffith breech carried by the Hawken Shop may be what you need.

Offline Herb

  • Hero Member
  • *****
  • Posts: 1709
Re: Early Hawken Breech Plug Source
« Reply #2 on: July 10, 2023, 07:38:20 PM »
Muzzleloader Builders Supply has four of them, $50 each.
Herb

Offline rsells

  • Hero Member
  • *****
  • Posts: 680
Re: Early Hawken Breech Plug Source
« Reply #3 on: July 10, 2023, 09:07:20 PM »
Thanks for the info folks.
                             Roger Sells

Offline dadybear1

  • Full Member
  • ***
  • Posts: 153
Re: Early Hawken Breech Plug Source (Found One Thanks)
« Reply #4 on: July 11, 2023, 08:41:12 PM »
ROGER SELLS CAN YOU PROVIDE PIC OF PLUG YOUR LOOKING FOR...iM BUILING AN EARLY HAWKEN BUT SURELY THEY DIDNT USE PATENT BREECH ON EARLY MODELS.  IM MORE INTO A TRANSITION MOD FROM FULL TO HALF STOCK..  THANKS

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4343
Re: Early Hawken Breech Plug Source (Found One Thanks)
« Reply #5 on: July 11, 2023, 08:45:31 PM »
Thanks for posting this question Roger.
Because of it, I found what I have been looking for as well!  :D
John
John Robbins

Online Bob Roller

  • Hero Member
  • *****
  • Posts: 9673
Re: Early Hawken Breech Plug Source (Found One Thanks)
« Reply #6 on: July 12, 2023, 12:21:50 AM »
ROGER SELLS CAN YOU PROVIDE PIC OF PLUG YOUR LOOKING FOR...iM BUILING AN EARLY HAWKEN BUT SURELY THEY DIDNT USE PATENT BREECH ON EARLY MODELS.  IM MORE INTO A TRANSITION MOD FROM FULL TO HALF STOCK..  THANKS
[/quote
They had bolsters for the nipple seat welded to the barrels.A "patent breech" is another thing entirely and usually allows barrel removal with the tang still in the wood.Supposedly the half stock Hawken was inspired by the English sporting rifles that may have passed thru pre 1849
St.Louis but I can't completely accept that because of the wide quality control differences in the two guns.The Brtit is a Rolls Royce and the Hawken at best reaches Chevrolet.Both very useful but only one appeals to the quality buyers.
Bob Roller

Online Bob Roller

  • Hero Member
  • *****
  • Posts: 9673
Re: Early Hawken Breech Plug Source (Found One Thanks)
« Reply #7 on: July 12, 2023, 12:30:25 AM »
Fer wot its wurth,TOW's Catalog #18 from 2012 had these breeches for $59.95.
Bob Roller